IPV 35w and 50w box mods

[tc1]

Or ... the reason elev8vape is behind compared to other vendors is because elev8 had more orders than other vendors. I mean ... the cheapest vendor tends to get the most business.

If order number is any indication (and that certainly isn't conclusive) .... elev8 has sold several thousand units. My guess is that no other vendor has sold that many.

 

[cadster0103]

Or ... the reason elev8vape is behind compared to other vendors is because elev8 had more orders than other vendors. I mean ... the cheapest vendor tends to get the most business.

If order number is any indication (and that certainly isn't conclusive) .... elev8 has sold several thousand units. My guess is that no other vendor has sold that many.

Ok... but you keep your biggest seller waiting and make sure all the other vendors have units. I don't know but if my top producer was out of stock I would do everything to make sure he has units. That theory makes sense In theory. I am waiting to hear from the few that were going to look into this. My vendor had order #'s in the 15k's. Also elev8 is still taking orders for the hana clones so it would be premature to think that all order numbers In sequence are for the ipv mod. I want everybody to get their mods. Especially since they have paid for it.

Good luck everybody?

 

[thenebulous]

Elev8 isn't behind due to a lot of orders, I don't think they've shipped past #6200 in almost a week now, so they are pretty much dead stopped. I am silver #5719 and was told Monday-Tuesday for my shipment but since then have received no notice and haven't bothered pestering them as if it was in it'd be shipped. I know where to get a 100w Sigelei for $85 but I can't weigh out the option to cancel Elev8 and wait the 3 weeks and deal with my currently faulty mod for the meantime, or hope to get my IPV soon... I'm leaning towards the Sigelei right now for a number of reasons.


also, I believe I heard P4Y didn't respect the low prices because it brings down the value of their name. I did email reps in regards to pricing and warranty policy to which they said it would still be in effect but never mentioned that this would come of it instead.

 

[cheesestain]

Are there any problems with atty's not sitting flush or atty's that hang over the edge?

 

[Jetdrive]

Just wondering if this is normal:

When I press the fire button with no atty attached, the screen displays "SHORT!". Is that normal? You would think no atomizer would be the exact opposite of short, actually an open. With an atty on it is reading the voltage and ohms and works fine.

 

[cadster0103]

Elev8 isn't behind due to a lot of orders, I don't think they've shipped past #6200 in almost a week now, so they are pretty much dead stopped. I am silver #5719 and was told Monday-Tuesday for my shipment but since then have received no notice and haven't bothered pestering them as if it was in it'd be shipped. I know where to get a 100w Sigelei for $85 but I can't weigh out the option to cancel Elev8 and wait the 3 weeks and deal with my currently faulty mod for the meantime, or hope to get my IPV soon... I'm leaning towards the Sigelei right now for a number of reasons.


also, I believe I heard P4Y didn't respect the low prices because it brings down the value of their name. I did email reps in regards to pricing and warranty policy to which they said it would still be in effect but never mentioned that this would come of it instead.

could you please tell me where to get the sigelie 100 watt box mod for $85. I would jump on that asap!

 

[yo_diego]

could you please tell me where to get the sigelie 100 watt box mod for $85. I would jump on that asap!

I've seen that on ebay.
From a seller that have 294 feedback score with 99.2 % positive.

I'm not to sure to go for it, seem to have sharp edges and can't find any measurements on the box.

 

[lumberjack]

When I press the fire button with no atty attached, the screen displays "SHORT!". Is that normal?

Mine resets the displayed resistance to 1.0Ω if no atomizer is attached.

 

[cadster0103]

I've seen that on ebay.
From a seller that have 294 feedback score with 99.2 % positive.

I'm not to sure to go for it, seem to have sharp edges and can't find any measurements on the box.

Thanks... I may just wait for my vendor to get his pre order going. I mean look at me, I just received my ipv v2 50 watt box and now I want to dump it for a 100 watt box mod, hahahaha

especially when others are waiting for theirs. I will look on ebay but most likely wont pull the trigger. I need to tease myself right now!

 

[cadster0103]

Mine resets the displayed resistance to 1.0Ω if no atomizer is attached.

When I take my atty off it keeps the last known reading until you hit the fire button. With no atty on it, once you hit the fire button then it resets to 1.0 ohms

 

[mountaingal]

Some electronic vendors are not allowed to show the price of an item IF it is far below the MSRP. You have to click on the item and sometimes put it in your shopping cart before the sale price is shown. They say that they are just following what the manufacturer requires for them to go below the MSRP. It's common practice, mostly in electronic sites. Seems there are rules for everything.

 

[thenebulous]

I've seen that on ebay.
From a seller that have 294 feedback score with 99.2 % positive.

I'm not to sure to go for it, seem to have sharp edges and can't find any measurements on the box.

Haha, that guy had it up for a higher price yesterday. I was actually referring to myninjavapor. He had it up for $100 and had a %15 coupon: F-THE-FDA but I called him and made him aware, just in case he wasn't, and he in fact wasn't - so he has probably since then changed the coupon.

 

[Jetdrive]

Mine resets the displayed resistance to 1.0Ω if no atomizer is attached.

Mine does the same thing for a second the goes SHORT!

 

[TheDC]

Truthfully, if this chip was in a Hana mod or Hana clone box -- would be 100% perfect. The buttons on this thing are what make it feel cheap to me. Oh wow, they're clicky. Who cares, I've already had the buttons get locked into place. Partially because there's nothing stopping them while they're being pushed in. Maybe I have a dud box. But I can literally push the button, hear the click, and see it's function, then press even a tiny bit harder and the button almost goes even more and eventually will get stuck.

Or maybe you guys are just way too fascinated by Oh my god 50 watts, to acknowledge it's faults. It's a shotty build. I'm not going to lie and say it's not a neat device, and happy about the chip. Just a crappy container.

 

[yo_diego]

Haha, that guy had it up for a higher price yesterday. I was actually referring to myninjavapor. He had it up for $100 and had a %15 coupon: F-THE-FDA but I called him and made him aware, just in case he wasn't, and he in fact wasn't - so he has probably since then changed the coupon.

yup, that coupon code is no longer working

 

[thenebulous]

yup, that coupon code is no longer working

I would go with the guy on eBay. eBay is secure and has buyer protection, plus he has great feedback. I'm probably gonna put in my order right now actually.


EDIT: Well, I emailed Elev8 and requested an order cancellation... Kinda feel like a wang chung for doing it, but somebody else shall get my unit, so that makes at least one person happy. Now I just gotta get used to the waiting game again and hope this SVD can hold up to 3 more weeks with my abuse.

 

[yo_diego]

I would go with the guy on eBay. eBay is secure and has buyer protection, plus he has great feedback. I'm probably gonna put in my order right now actually.

Keep us posted.

The next question to me will be to cancel or not my actual order from elev8, not because I'm angry/impatient just because don't know if I need 2 box mods.

originally I was thinking to modifying the IPV2 to use 2 18650 if that was posible, but from what I've seen in the videos reviews the battery cap has some cavity. The Sigelei already came in dual battery mode.

Any suggestions for the ones that already have the IPV2 in their hands?

 

[suspectK]

I love the IPV2... I'm debating to buy the 100watt version, but the ipv3 is only a single battery.. although they could've utilized a better use of space in the ipv, but you're not going to get another battery in there.

 

[yo_diego]

The one with confirmed dual 18650 is the sigelei 100 watts, but it seems a little bigger imo

 

[Budkiss]

the new IPV 100 watt will have dual 18650's in it so i guess they are going to take advantage of the 'wasted space' inside the box and make a new back plate (since it is using the same box, buttons, chipset, screen, touchfire, etc).
I wonder if you could email Denny at P4Y and get them to send you a vector image of the back plate on the 100 watt. It couldn't be that hard to machine.