Merged 6 threads
Sorry, was just trying different forums to try and get answer, never did this before#!
It stops blinking if I remove the tank!!! WeirdWish I could help. I got some Picos but I can't remember seeing the screen blink like that.
I fooled around a bit. I did get it to blink for a while by loosening the battery cap to where it was only just making a connection. It blinked on and off regularly for a while. Might be worth checking the positive battery connection at the bottom. Not sure what could be wrong with the connection though.
I'll try a different tank!!! I'll let you know, thanks for your helpHave you got another tank? Based on it stopping when you took the tank off and my experiment with the battery cap it sounds like it could be a loose connection somewhere. Maybe in the tank.
It's not tight, Idk it's very frustrating though, I tried different tank, same thing just blinks!!!!!! Here is picture, do I have something set wrongI have heard this happening if the tank is screwed on too tightly.
Same thing!!!!!I'll try a different tank!!! I'll let you know, thanks for your help
ThanksMoved to VV VW APV Discussion from Tips and Tricks
This is true. Unless of course you make something of it...It won't let me do anything, can't change nothing.
What are you talking aboutThis is true. Unless of course you make something of it...
Sigh. I need a hobby.
I was making a lame joke about one being able to do nothing with nothingness.What are you talking about
I tried loosening it though and still nothing. It's weird, it worked fine, I change the battery and boom ours broke!!!!! Wtfmooch’s blog tests on imren batteries imply they are junk with actual ampherages as low as 12a. List of Battery Tests | E-Cigarette Forum
It’s possible that even charged there is still a problem of low power. Me, I’m liking the screwed on too tight theory atm as well
Well that made it quit blinking, but it won't do anything but let me change the wattage???No, I wouldn't recommend those batteries at all.
First I would try a new battery.
Then you could try reloading the firmware from the eLeaf site. www.eleafworld.com
With the tank off, and a battery installed press on the center pin of the 510 (tank) connection with a pen and see if it blinks.
Also take a q-tip dipped in alcohol and clean the threads of the 510 and the battery cap.
checked the pic you posted and it seems your pico doesn't detect the coil, imo looks like your mod (aka the pico) is either dead or malfunctioning.Well that made it quit blinking, but it won't do anything but let me change the wattage???