that's a little different than just having clones in their store!
CB was using 1.5mm ecowool in his video. im going to try some next order. try what you have, you should be OK. I doubt ill ever build my term-c again. the kayfun lite is that good!
- Status
that's a little different than just having clones in their store!
CB was using 1.5mm ecowool in his video. im going to try some next order. try what you have, you should be OK. I doubt ill ever build my term-c again. the kayfun lite is that good!
correct, clone top caps. Non OEM, till mojo saw them... It is what it is. I am running 3mm wick, 32g kenthal @ 1ohm in my LITE. Grenada is just so good.
NO LIE THERE!!!! I am thinking my 4 Terminator-C's are soon to be retired.
Last edited:
Ekowool is all I use. There is much information on it on ECF. I have used 1.5, 2.0, 3.0 in the kayfun and find that 2.0 is the best wicking for me and fits in the evac chamber the best. The less eko the better. Eko is measured by inside diameter as it is hollow from 2.0 and up.
A few pics of my wick for your dancing aand dining pleasure.
Tails pulled to size loops perfectly and tails cut. Lays down perfect flat sides over juice well
A few pics of my wick for your dancing aand dining pleasure.
Tails pulled to size loops perfectly and tails cut. Lays down perfect flat sides over juice well
they have kayfun conversion kits for the term-c that makes it a kayfun but with juice control and top filling.
Its a polish site but I got on the list yesterday.
watch todds review if you havnt seen it
GG to Kayfun Conversion Kit - YouTube
<a href="http://www.youtube.com/watch?v=v08gYLjSqbs" target="_blank" rel="nofollow">
so... all those oddys,nautilus,terminator-c's could be kayfuns with added benefit of juice control and topfilling for $57 and probably a 4-6 week wait. But get on the list now before it closes!
Its a polish site but I got on the list yesterday.
watch todds review if you havnt seen it
GG to Kayfun Conversion Kit - YouTube
<a href="http://www.youtube.com/watch?v=v08gYLjSqbs" target="_blank" rel="nofollow">
so... all those oddys,nautilus,terminator-c's could be kayfuns with added benefit of juice control and topfilling for $57 and probably a 4-6 week wait. But get on the list now before it closes!
Last edited:
where did you get it?
Ekowool is all I use. There is much information on it on ECF. I have used 1.5, 2.0, 3.0 in the Kayfun and find that 2.0 is the best wicking for me and fits in the evac chamber the best. The less eko the better. Eko is measured by inside diameter as it is hollow from 2.0 and up.
A few pics of my wick for your dancing aand dining pleasure.
Tails pulled to size loops perfectly and tails cut. Lays down perfect flat sides over juice well
The batch I have came from a good friend/Jacoji and it is from Poland and is the real Russian material. I would hesitate to buy it in the states honestly. I have posted my thoughts on another thread. Be sure and be carefull of the Russian "like" fibre material used/sold in the states. Russian eko is the best in the world and can be found there and Poland(from Russia)
Here is a great deal if a few of you want to invest.
Ekowool
Here is a great deal if a few of you want to invest.
Ekowool
ewokfur is OK, but it unravels if you handle it too much - like trying to jam mesh down the core.
Last edited:
Ekowool is all I use. There is much information on it on ECF. I have used 1.5, 2.0, 3.0 in the Kayfun and find that 2.0 is the best wicking for me and fits in the evac chamber the best. The less eko the better. Eko is measured by inside diameter as it is hollow from 2.0 and up.
A few pics of my wick for your dancing aand dining pleasure.
Tails pulled to size loops perfectly and tails cut. Lays down perfect flat sides over juice well
That's a beautiful wick+coil setup, wow!
Isn't it better that we dole out a few more $$ and get one more Kayfun instead?
I think it's better to have the choices. And kayfun can compete with a partial kit. Or china.
Not to mention that 'kit' leverages flow control and adds airflow-control.
Not to mention that 'kit' leverages flow control and adds airflow-control.
Last edited:
I carted and then deleted. 104 EUR? Their product price itself (74.95 EUR) is higher than InTaste's total of 74.78 EUR (62.98+11.8=74.78). I'd rather wait. Or am I missing something?
Yes, i did the same this morning. I have to wait till InTaste has them back in stock.
Dont handle it to much then. Ive never had issue but again, I dont use anything cheap.
Torch the ends till they glow and it will prevent fraying and allow a clean cut with tonail clippers. I can show you eko that I rinse and repeat for a couple months that looks almost like it is brand new.
The above picture I posted of ekowool was handled as much as it needed to be for a wick and it will look like that for weeks of hard use.
I also am happy to show you how to roll a fat ss wick and easily slide it down 3 mm or 4mm ekowool with no issues.
4 week non torched ends eko on Spheroid
First rinse on a 7 day old Kayfun mini that I use as dripper
2 week old genny wick
Your post lacks fact and personal exp.
never had ekowool unravel like crazy. i dont even torch the ends. Ive used 1mm 1.5mm 2mm 3mm. No issues. Cut, wrap, vape
in regards to the russian. I think at it's price I would much rather have a lite. Mind you I also have a 3.1 which is also good. Hmm spend 115 on a fake, 100 on something pretty much performs the same but is made in germany and is the real thing. Lite all day long.
It is nice having AFC on the 3.1 and the resevoir but it is not a deal breaker. The simplicity of the lite is what makes it shine. no mucking about. wrap your coil. fill from the bottom and repeat and repeat and repeat.
in regards to the russian. I think at it's price I would much rather have a lite. Mind you I also have a 3.1 which is also good. Hmm spend 115 on a fake, 100 on something pretty much performs the same but is made in germany and is the real thing. Lite all day long.
It is nice having AFC on the 3.1 and the resevoir but it is not a deal breaker. The simplicity of the lite is what makes it shine. no mucking about. wrap your coil. fill from the bottom and repeat and repeat and repeat.
So it's my understanding that the Kayfun Lite is able to use drip tips stock. What tips do you guys think look good on this atomizer? Does anybody have pictures of what a non-stock drip tip looks like on the Kayfun Lite?
the 3.1 also comes with an adapter to use any drip tip. TBH though I think the included tip works the best
Ya ... I shelled out almost $150 this morning for the k lite and a couple provari rings. Im just fedup with what I got and need a good reliable atty, should of waited for intaste to restock but my luck is I would of missed out.
But with paying $37 for dhl 2-3 day shipping I was hoping to have a tracking number by now...
Nothing... not even an order confirmation except from paypal. When I log into the site it says order statuspen PP paid in full.
Hope all is well with this... I already feel guilty for ordering it since I took a hit at work and lost $5 an hour
But with paying $37 for dhl 2-3 day shipping I was hoping to have a tracking number by now...
Nothing... not even an order confirmation except from paypal. When I log into the site it says order status
pen PP paid in full.Hope all is well with this... I already feel guilty for ordering it since I took a hit at work and lost $5 an hour
- Status
Similar threads
