Kayfun LITE

[J*Bishop]

Guys,

Move the discussion of the Digital Steam shipping talk to this thread: http://www.e-cigarette-forum.com/fo.../389643-digital-steam-anybody-order-them.html

 

[Idaholandho]

Hope the teflon works better for you. The oring from included screwdriver has worked perfectly for me. Remember with the oring, just tighten enough to put a little pressure on the oring but don't squash it. I had a small pool of juice under that lite in a day but since the oring, it's been bone dry for a week. Hope the new one doesn't have this problem.

I had to squeersh it to flush the screw with the bottom of the atty. Of I didnt there was a slight tilt/gap as, I have the mounted on flat tops(not sure if that mattered.

Guys,

Move the discussion of the Digital Steam shipping talk to this thread: http://www.e-cigarette-forum.com/fo.../389643-digital-steam-anybody-order-them.html

No doubt, 7-10 days of DSteam, inTaste, VapeRev .....ing, Shipping, Customs, complaining, my little ponies and fluffy bunnies is killing us here.

 

[deezdrama]

Im sure its a buzzkill to all of you lucky enough to have your kf lites and not having to worry about where its at.

No problem
Unsubscribed

Enjoy your kfl

 

[Rule62]

I haven't received my KfLs from Vaperev yet either, as of today's mail.
It amazes me that I can order stuff from Germany or Greece, and it gets here faster than an order from California. Ain't USPS great? No wonder they're broke.

 

[CGustav]

Im sure its a buzzkill to all of you lucky enough to have your kf lites and not having to worry about where its at.

No problem
Unsubscribed

Enjoy your kfl

I am sorry for the issues you are having with Digitalsteam. Since this is a new, popular and hard to get (ATM) device, I think the issues people had with vendors and shipping has been relevant and helpful for everyone to know. But to me it also makes sense to have two different threads for diverging topics.

 

[CGustav]

I just received mine this morning. Congrats to inTaste for delivering it even faster than the US vendor and for cheaper. Highly recommended.

Impressive little atty. Too bad I can't try it out until tonight.

I noticed the threading on the SS mid section is not as clean as the other pieces. It caused squeaking while unscrewing.

 

[Blix]

Maybe a pretty photo helps lighten the mood?

 

[lctrc]

No worries. Since most people have them in their hands now, it makes sense to not distract from discussion of the device with discussion of not having the device.

 

[J*Bishop]

The dremel shows up tomorrow in the mail... I'll post the results.

Did you ever get to polish it up?

 

[speedemon]

and I too have a shipping notice! LOL Mine is estimated to be delivered tomorrow does anyone know how to digitally sign so I won't have to be here?

Donnah for intaste delivery just sign and date a note for the fedex driver put your order # and date on note tell them on note ware to leave it. That's what I do he comes early when i'm not home.

 

[eratikmind]

and I too have a shipping notice! LOL Mine is estimated to be delivered tomorrow does anyone know how to digitally sign so I won't have to be here?

Go to the FedEx website and you can customize your delivery options.

- Andy

 

[liveone]

Donnah for intaste delivery just sign and date a note for the fedex driver put your order # and date on note tell them on note ware to leave it. That's what I do he comes early when i'm not home.

I usually leave a note fur FedEx on my front with tracking number if i don't want them interrupting my siesta.


Sent from my phone using Tapatalk

 

[Tennovan]

Maybe a pretty photo helps lighten the mood?

That's the exact same setup I'll be running when my ELA arrives. I'm 154XX so it'll be another few months at the rate they've been shipping out though. Guess I'll just have to run my KFL on my beat up Silver Bullet until then.

EDIT: Just curious, what's the bore on that DT? I'm looking at a couple wide bore shorties and I'm not sure if it'll affect performance.

 

[qorax]

I haven't received my KfLs from Vaperev yet either, as of today's mail.
It amazes me that I can order stuff from Germany or Greece, and it gets here faster than an order from California. Ain't USPS great? No wonder they're broke.

Seems the usual norm... My overseas shipment ALWAYS come much before the locally ordered stuff.

If u thought USPS suck - try Canada Post ! They'll derail your thinking altogether ! USPS delivers to me usually in 4-5 days, my very own Canada Post brings things from Vancouver in 12-14 days ! Beat that !

FedEx / DHL gets my stuff from Germany, Greece, Italy, anywhere in EU in 3-days flat.

Fasttech delivers to me within 8-12 days ! Ah, before Canada Post, LOL !

 

[nelsonm64]

my KFL has been in Vancouver since 130pm PST and is suppossed to be here by 5pm, lol i can't see that happening, it's a 3 hour drive from Vancouver to my city alone! haha, tomorrow it is then... can't freakin wait!

 

[tony808]

Got my kfl awesome and easy setup on a sig19 with sg1

 

[CGustav]

Got my kfl awesome and easy setup on a sig19 with sg1

With the SG1 are you bound to filling via the top cap, assuming removing the bottom adapter would not be practical to do all the time?

 

[Chuckq4yoo]

SO after like 10 or so builds, I finally got the perfect one. To the person that suggested the figure 8 method, thank you! I did that with 4 wraps of 28 gauge wire, and holy crap... the wicking is phenomenal and the flavor of this oreo juice i'm using is outstanding. I freaken love this thing haha

 

[tony808]

With the SG1 are you bound to filling via the top cap, assuming removing the bottom adapter would not be practical to do all the time?

Yeah I've been filling from the top the tank capacity is more than enought for me as I rotate device throughout the day. I usually vape till I get a few dry hot before filling, and haven't got flooding issues after filling

 

[Edson Arantes]

I’m pretty sure this has been asked before, but I’m not sure where to look. How does the K-Lite perform with high VG juice 70+%???

Thanks!