I have been having great success with ribbon wire set up like micro coil at 1.9ohm in that i'm using cotton from a simple cotton ball. Think I would de able to snake 1-1.5 eko. Been using 2-3 eko with the figure 8 so far works great as well.
- Status
I have been having great success with ribbon wire set up like micro coil at 1.9ohm in that i'm using cotton from a simple cotton ball. Think I would de able to snake 1-1.5 eko. Been using 2-3 eko with the figure 8 so far works great as well.
All systems go over here. No leaks, cracks or any funny stuff.
Anyone here travel with the KFL on a semi full tank? Wondering if it'll leak with the altitude /pressure change (even with the cabin equalized). I've had pens explode so I definitely don't want my clothes covered in juice!
how often do you guys change your wicks/coils? after about a couple days of heavy use, the vape flavor started to get really bad. cooked, burnt. i opened up the KL and it was all black. im sure my crappy n00b first builds were part of it.
so i ask, if the wick/coil is perfect, how long will that last before vape quality is affected? its time-consuming to change coils frequently when you find out its not wicking correctly.
i switched back to my did genesis bc i was spending less time vaping =x
still love you KL but you can be such a PITA
so i ask, if the wick/coil is perfect, how long will that last before vape quality is affected? its time-consuming to change coils frequently when you find out its not wicking correctly.
i switched back to my did genesis bc i was spending less time vaping =x
still love you KL but you can be such a PITA
Last edited:
What I do might be a little something different than anyone else here. But. I pull out the wick. Rinse and dry, dry burn, rinse and dry, then re wick with a NEW wick using a 26g wire hook. Then prime and done. Should take like 10 mins.
Last edited:
I think the biggest determining factor is your juice. My wife went through almost 200ml on same microcoil and cotton wick before I changed the wick. That's with diy peach 70/30 pg juice.
Wick every 3-4 days. Coil less often, and so far only because I was trying to find a good balance of resistance, lag, flavor, etc. If I don't pull it to try something new, my current coil could probably last for weeks.
Like Mrrickyyap, I pull the wick out leaving the coil mounted and dry burn the coil. But I don't re-use the wick just pull a new one through.
Using a micro and cotton, I get about a week with the wick and a few weeks with the coil. As others mentioned, I simply pull the old wick out, dry burn the coil to get the gunk off, and then install a new cotton wick. Takes about 5 minutes if I'm only changing the wick, quite a few more if I'm rebuilding the coil (because I'm a perfectionist).
Just ordered a KFL today from cloud9, so it should be with me tomorrow. Decided my Paps Lux deserved something sexy for a change 
Just ordered a KFL today from cloud9, so it should be with me tomorrow. Decided my Paps Lux deserved something sexy for a change
That's a right decision, u chose well my friend!
After a few weeks vaping with my KFL and tinkering with 'the perfect' setup, I think my search for atties is finished 
well, or maybe not.. I could use a good dripper
GP Spheroid for my ADV juice and when I'm out, KFL for another juice or my ADV when I'm at home. What more do you need?
well, or maybe not.. I could use a good dripper GP Spheroid for my ADV juice and when I'm out, KFL for another juice or my ADV when I'm at home. What more do you need?
I debated posting this as I fear I'm the only one, but has anyone ever had the fill screw head strip on them.
I can still fill the tank using the "other" method until I bore out the screw, but yea that sucked!
I can still fill the tank using the "other" method until I bore out the screw, but yea that sucked!
with the micro coil and cotton, im like most above, I pull out old cotton wick, dry burn coil, then slide in a new cotton wick. my coil is 26g so its good for a long time, its been in for about 3 weeks now and probably will last for another month without doing nothing but dry burning every 3 days, that's when I change the wick, about every 3 days
I use a micro coil and cotton. I use 26g wire with 8 wraps for a resistance of .65Ω and it wicks really well, no problems at all.
that would be me, thanks. my tails go down to the base and a tad more, they don't touch the base then go along it all the length of the bottom. I would say they touch the base then make a slight bend then go along the bottom about 1/8 in. so they are slightly longer then just touching the base.
I thought the same, the coil does look a little funky, like you said some wraps looks like they are overlapped, but then it may just be the photo. kind of looks like there is cotton coming up through the wraps or something. definatly don't want overlapping coils if they are
I have a tap (mini) that can be used to remove screws IF it will grab it. I notice they, the KL, come with 3 extra screws, so it has me wondering if this was anticipated.
Still doesn't sway my opinion of the Kayfun. I may even grab another, but stay tuned for the fix
- Status
Similar threads
