- Status
Ok, tried this, works great now......just finger tips and firing with small finger (pinky)...NO air intake blockage. Doesn't look as cool as palm'n it tho, but it works....Thanks.
Finger tip grip....works great, just looks funky, guess I'll get used to it...
Really prefer the full grip, but its too risky to cover that air intake and flood her....
Last edited:
More experimenting, swapped the stock drip tip out for a short one with a bigger hole.
Results - no gurgling, even if I flood it.
Makes the KFL shorter over all length, although this thing is tiny already, the pictures make them look huge, but they're small units. Fits better in my pocket. And too me, looks much better over all.
A serious power hitter. 24hrs into my KFL, no leaks, a not one dry hit yet.
Anyways here' the tip I swapped....providing and even better vape than stock...
Just wanna show the size of the KFL in the hand...its small...I luv it!
Results - no gurgling, even if I flood it.
Makes the KFL shorter over all length, although this thing is tiny already, the pictures make them look huge, but they're small units. Fits better in my pocket. And too me, looks much better over all.
A serious power hitter. 24hrs into my KFL, no leaks, a not one dry hit yet.
Anyways here' the tip I swapped....providing and even better vape than stock...
Just wanna show the size of the KFL in the hand...its small...I luv it!
Last edited:
He's a builder on the forums here, Bret is his name, goes by "ohman". You order by PM or his email...
Here is the thread with pictures of all his tips and tesitmonies...I ordered mine and got it in 4 days.
http://www.e-cigarette-forum.com/forum/modder-accessories-supplier-forum/436537-introducing-bmods-custom-drip-tips-more.html
^ oops, qorax beat me to it.....
90% of the times I type Paps it comes out as Papa too
I don't even realise, til you pointed it out 
Must be the nic rush from my Paps Lite performing so well. But it is the Daddy of all attys, so I think I'll carry on calling it Papa
How I hold my Roller/KFL in 18350 mode. Love how stealth it is.
Sent from my HTC One using Tapatalk 4
Sent from my HTC One using Tapatalk 4
That tip looks cool on the lite. The larger diameter opening seems like it would make a big difference in draw.
In 350 mode I hold it with the air hole between my index and middle fingers. Usually I use the 350 tube for stealth vaping and hold it that way with gennys as well.
Have any of you switched flavors without swapping the cotton on the micro coil setup?
I finally got a really nice cotton wick set in there, my first one was good, but wanted a little lower ohms, so i redid the whole setup and this one seems perfect. I just don't want to mess with this perfect wick for a few days and wanna throw a different juice in there. I figured the cotton wicks so good maybe the old juice would clean out quickly enough i might not even notice the old flavor?
I finally got a really nice cotton wick set in there, my first one was good, but wanted a little lower ohms, so i redid the whole setup and this one seems perfect. I just don't want to mess with this perfect wick for a few days and wanna throw a different juice in there. I figured the cotton wicks so good maybe the old juice would clean out quickly enough i might not even notice the old flavor?
I do it all the time. I just rinse it out well, then gently blot the cotton with tissue, a very brief "dry" fire (don't want to burn the cotton), reload and go.
^thanks
My grants vanilla custard came in today, so I'm just gonna throw new clean cotton in to be safe....testing it out on a carto tank before filling the KFL, omg this "GVC" sh$t is fenominal....one tank in the KFL and the rest goes in for a good steep. If it tastes this good on day1, wondering whats its like in a month if I can even wait that long. I thought Bobas was my tops, but I don't know now...
My grants vanilla custard came in today, so I'm just gonna throw new clean cotton in to be safe....testing it out on a carto tank before filling the KFL, omg this "GVC" sh$t is fenominal....one tank in the KFL and the rest goes in for a good steep. If it tastes this good on day1, wondering whats its like in a month if I can even wait that long. I thought Bobas was my tops, but I don't know now...
Hey guys, been having flooding / leaking issues through the air hole lately. Actually, I think I've had some sort of leaking on every build I had with the KFL (some worse than others). Not sure what I'm doing wrong. I've tried different heights on the coil, to more wraps on the coil to hold the wick to the sides better, to not drawing too hard, to adjusting the wick so it's not so close to the air hole. I never tried a wick that spans the floor of the chamber though. I have also checked all the O-rings and they seem to be ok. I've also tried a 1.2mm ID coil and a 1/16" ID (pictured). I think the 1.2mm might have leaked less. This is a great atty but I'm kinda getting tired of the leaking. Any input from you guys will be greatly appreciated.
The LITE is same as an ody, or terminator -c. If your upper o-ring does not seal. Your fluid will leak out the air intake. Have you tried a replacement upper o-ring? I guess you have the coil, placement wraps worked out. The only time i have had fluid come out the intake. My upper o-ring failed, it was swelling from my juice choice. I have three LITES sitting here, no leaks.. My favorite is filled with Grenada, past 2 weeks, no leaks. I put a pro-tank wick seal in place of my factory LITE o-ring. Do you have the xtra o-ring's?
Are you talking about 4C in the image below?
*Runs to the closet to check intaste package.* Yes! I have another o-ring. That's something I thought about but never bothered to try. I'll give it a shot this afternoon. Do you lube the o-ring with e-liquid before assembly?
Yes it is "4c" I install moist, water or fluid. I just wrap a rubber band around the air intake. Seals the bottom tank, then can remove "4a" with out loosing your fluid. Place the original o-ring next to your spare and see if it has changed size. I was able to put my original spare o-ring, into the center of my swollen e-juiced "4c". As long as "4c" is tight, you should never get fluid out of the air intake.Are you talking about 4C in the image below?
*Runs to the closet to check intaste package.* Yes! I have another o-ring. That's something I thought about but never bothered to try. I'll give it a shot this afternoon. Do you lube the o-ring with e-liquid before assembly?
- Status
Similar threads
