Kayfun LITE

[evgeny131]

and now a short review of my new gear:
King SS Mech..
near perfect build quality- threading buttery smooth from the box, tubes, locking ring, center post.....every thread on this mod is silky smooth and the added weightiness of the mod makes it that much more satisfying to use the locking ring and airflow ring at the top...
switch: the throw is short, precise....10/10imho
copper contacts- reverse threading on the inner descending center post adjusts for any battery configuration, an extra 500 tube is included in the box...
overall quality: 10/10
voltage drop compared to poldiac and 69 using same load- 9.5/10
kayfun delta: purchased specifically for the king ss....both have a high polish finish.....the overall aesthetic is perfect imho...10/10
ability to change dt on the kayfun delta and airflow control makes it a plus for me over the k-lite...especially after using the k-mini first....
SQuape:super easy to set up...ematal coating doesnt conduct electricity, simpler to coiler than kayfun- no shorts possible....
slap anything between the posts, as long as it doesnt block the channels you are good to go....
huge plus: ability to re-coil without emptying tank, just flip the squape over and unscrew the base, fills right into the top housing from a bottle, no need for syringes, needle tips, or valves.....
vape quality- 10/10imho, after the kayfun the ease of use is astounding....flavor- great, drip tip included but can be interchanged...
King Mod SS- Highly Recommended if you like shiny and heavy
Kayfun Delta- Ditto....
SQuape- Ditto...lol....with a brushed finish

 

[evgeny131]

are the sm logos stickers on the k 3.1 es? all finishes? or just my polished delta?

 

[nttdemented]

This is what I use (but I have a friend who gave me a bunch cuz she works at a hospital). Same exact syringe, same 18ga blunt tip. Works perfect for filling and unfilling the Kayfun.

Pack of 10 x 5 ml Syringes Blunt Tip 18g Draw Stick not Needle No Skin Injection | eBay

Awesome! Was thinking of going to walgreens but I'm not sure they have high guage blunt tips, or do they?

 

[Bronze]

Awesome! Was thinking of going to walgreens but I'm not sure they have high guage blunt tips, or do they?

No freagin' idea. They might.

My Grandparents (RIP..born in the 1890's) used to pronounce it Wallgrins.

EDIT: Make sure you get the 5ml capacity syringe. The Kayfun holds 4+

 

[nttdemented]

No freagin' idea. They might.

My Grandparents (RIP..born in the 1890's) used to pronounce it Wallgrins.

EDIT: Make sure you get the 5ml capacity syringe. The Kayfun holds 4+

Yeah I sure will. I already got some 10ml bottles with small plastic needle tips to refill but I did my first fill by pushing the tip of my Mt Bakers bottle onto the screw hole. It did a good seal and filled up without needing the tips.

But I can sure use the plastic needle tiped bottles to hold whatever I suck out of the KFL temporarily.

 

[Bronze]

Yeah I sure will. I already got some 10ml bottles with small plastic needle tips to refill but I did my first fill by pushing the tip of my Mt Bakers bottle onto the screw hole. It did a good seal and filled up without needing the tips.

Now try to suck the juice out with that bottle. You could probably make lots of friends if you can.

 

[evgeny131]

350 mode

 

[Bronze]

Where do you stick the key in those things?

 

[digitals]

are the sm logos stickers on the k 3.1 es? all finishes? or just my polished delta?

I have a KF3.1beta and it has a logo on it. Was that what you were asking?

 

[nttdemented]

Now try to suck the juice out with that bottle. You could probably make lots of friends if you can.

Challenge accepted! I got an empty 15ml mt baker bottle I can use for this...

Here hold my beer!

 

[Bronze]

Challenge accepted! I got an empty 15ml mt baker bottle I can use for this...

Here hold my beer!

Can I take a swig?

 

[nttdemented]

I'm drying my bottle know after cleaning it with soap and water. Testing a squeeze and suck under the faucet looks promising.

 

[Bronze]

 

[nttdemented]

Holy crap!! It worked like a charm! I sucked out the 1ml I had in there completely! Took it appart and it only had a few drops left inside of it!!

And I didn't make any mess while doing it! Just squeezed the bottle tightly, pressed tip in, put the kayfun right side up and it ucked everything out in two tries!

 

[Bronze]

Holy crap!! It worked like a charm! I sucked out the 1ml I had in there completely! Took it appart and it only had a few drops left inside of it!!

And I didn't make any mess while doing it! Just squeezed the bottle tightly, pressed tip in, put the kayfun right side up and it ucked everything out in two tries!

Under different circumstances, I might of asked you out on a date.

 

[BigCypress]

are the sm logos stickers on the k 3.1 es? all finishes? or just my polished delta?

I have a KF3.1beta and it has a logo on it. Was that what you were asking?

evgeny, are you saying that your logo is a sticker?
Is it possible its a ruskie thats been refinished and then a s/m sticker slapped on?

 

[nttdemented]

Under different circumstances, I might of asked you out on a date.

You where the one who suggested it! I'm already re-wicking my KFL ready to put my second flavor through it. Now the hard part. What to put in it... Peanut Butter, Butter Pecan or Dutch Apple Pie... Decisions decisions...

 

[jjkanto]

They are all 3.1ES. Those Alpha, Beta, Gamma et all are just different surface textures

Thanks Q. Didn't know that those represented the finish.

 

[Zanzibar]

Anyone know how the clear tank holds up against clove and other plastic abusing flavors? I don't mind using the SS tank but being able to see how much juice I'm working with is a definite pro.

 

[qorax]

Anyone know how the clear tank holds up against clove and other plastic abusing flavors? I don't mind using the SS tank but being able to see how much juice I'm working with is a definite pro.

It WILL crack