@ qorax, have you tried those 30 amp Efests something like 1500 or 1600 mah?
- Status
Consumer Battery Manufacturers:
AW is not a battery manufacturer AFAIK. They are just repackagers (exactly like Efest), but are known to 'procure & package' the best of the best batteries in the market. Which incidentally, are usually Panasonics.
The top consumer battery manufacturers are:
(A) Alkaline: Duracell, Energizer, Gold Peak (Lithium also), Hitachi Maxell, Mugen Power (Lithium too), Nippo, Rayovac
(B) Lithium: LG, Panasonic (Alkaline also), Sanyo (Alkaline also), Sony, Tadiran, Uniross (Alkaline also), VARTA (Alkaline also)
________________________________________
^in alphabetical order
Ref: www.wikipedia.org
Now that's funny! We're all arguing that "our" battery is the best when it appears they are the same batteries.
looking at these marks a little more closely it seems to me they are sort of lay out marks. they are actually on both sides of the decks and are at a certain angle, kind of like arrows. I think they were marked this way for lay out purposes.
Just coiled this bad boy up and went for low ohms. 28ga kanthal and 2mm ekowool. Came in at .8 ohms. I was NOT ready for the kick it's giving me. WOW!!
FYI that is NOT a scratch. Clear jwrap that I put on pretty badly. LOL.
Last edited:
Can anyone please tell me when using the stainless center piece (as opposed to the clear window) how you can tell how much to fill it and when to refill?
Also, if the clear window is fogged, is it bad to polish it out with something like what they use to "unfog" headlights?
Thanks for the help everyone!
Also, if the clear window is fogged, is it bad to polish it out with something like what they use to "unfog" headlights?
Thanks for the help everyone!
Brasso has been used for years to polish the plastic cockpit covers on the military jets ( they may use something more costly now probably), works for dvd's, car headlights anything plastic.
Works good on metal too.
Works good on metal too.
I use a syringe when filling/refilling. I filled my KFL for the first time and marked the syringe for capacity. Works great. However, knowing "when" to refill is something I had to learn. I just know what I vape per day, so I can usually nail it down as to when I'm due for a refill. Using the small/large m tank makes it easy; juice at the bottom of the window = refill.
You know you're hooked when, as an IT GUY, you see a CD/DVD Spindle and mistake it for a GINORMOUS spool of Kanthal wire...
Is that the M tank?! I dunno.. for some reason it seems to take away from the classiness of the K-Lite. The SS when used with the window, is IMHO the sexiest look for it.
Last edited:
You know you're hooked when, as an IT GUY, you see a CD/DVD Spindle and mistake it for a GINORMOUS spool of Kanthal wire...
That is exactly what I thought it was at first glance; I had to do a double take
I thought "Wow, that is a giant roll of wire"
I had to sell my KFL to have enough money to pay for my education. It was a very good device )
sent from my phone
)sent from my phone
You know you're hooked when, as an IT GUY, you see a CD/DVD Spindle and mistake it for a GINORMOUS spool of Kanthal wire...
Is that the M tank?! I dunno.. for some reason it seems to take away from the classiness of the K-Lite. The SS when used with the window, is IMHO the sexiest look for it.
Lol. I see how it looks like wire. Yeah that's the m tank. Sometimes I think it doesn't look good, then I see someone's picture and I'm like wow that's sexy. I'm off and on about it. I will switch it up here and there.
I had to sell my KFL to have enough money to pay for my education. It was a very good device
sent from my phone
You made the right choice, fwiw!
Sent from my iPhone using Tapatalk 2
I had to sell my KFL to have enough money to pay for my education. It was a very good device
sent from my phone
I'm sorry to hear this but priorities are priorities. Good luck with school.
- Status
Similar threads
