Weird. I'll have to try that tomorrow. Just take off the orings, and insulators and boil the metal for how long? Few mins?
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
- Status
Would you just get random dry hits? Mine works good sometimes then I'll walk upstairs then dry hit. Works good, then dry hit. Meanwhile my wife's works perfect all the time.
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
that was exactly the problem. It was driving me insane.
like I said, could be that i switched out the plastic tank, or the new coil, or the new wick, or the new orings.
But its workin now.
Lookin good ev!
I remember when every picture was just your zen-side o' flage.
I remember when every picture was just your zen-side o' flage.
So... about those post screws...
Super noob move.
measured entire screw instead of from the bottom of the head to the tip,
as you are wont to do.
So they WILL fit in the - terminal.
But I have to take a mm off half of them.
I've successfully made the cut on 3 of them, just figuring out the fastest way to bang em out
without ruining someones threads.
Anyone have any micro screw cutting experience?
I did a googling search and saw a few methods.
Super noob move.
measured entire screw instead of from the bottom of the head to the tip,
as you are wont to do.
So they WILL fit in the - terminal.
But I have to take a mm off half of them.
I've successfully made the cut on 3 of them, just figuring out the fastest way to bang em out
without ruining someones threads.
Anyone have any micro screw cutting experience?
I did a googling search and saw a few methods.
Just to be clear,
the negative terminal threaded hole is deeper than the positive hole.
So these longer screws fit in the one that threads directly on the base,
but I have to take a mm off the ones that are going in the positive.
the negative terminal threaded hole is deeper than the positive hole.
So these longer screws fit in the one that threads directly on the base,
but I have to take a mm off the ones that are going in the positive.
which mechanical mod is your favorite right now?pardon the flash...
Just GG Brass/Ithaka, 69+Brass Kit/Kayfun Lite, King SS/SQuape, Nemesis Kalafan/Kayfun 3.1ES Delta, Poldiac Full Satin/Kayfun Lite,
Bagua SS/Kayfun 2.1 Mini
The Ithaka and the SQuape are HEAVY contenders to the Kayfun series....although IMHO nothing beats the Kayfun 3.1ES...
Hello again, I posted a couple pages back . I have a feeling it was not noticed, but I was wondering if anyone of you Kanfun-iacs know if replacement parts are sold for the Kayfun lite. I was wanting to get just the base/ deck with the terminals.
Thanks, I hope they do.
Thanks, I hope they do.
I've never seen those parts for sale anywhere. You might try to talk to the folks at vaperev as they seem to be the official usa vendor.
For those of us not on DZ's friend list and i am probably too poor to be included - check this out from turbo! Apparently he can wrap coils as his wife sleeps.
20131023_000425.mp4 - YouTube
I can see the benefit of that!
THP
20131023_000425.mp4 - YouTube
I can see the benefit of that!
THP
I found a thread that discusses this at length although after 5000 posts I haven't found any definitive & conclusive answers.
http://www.e-cigarette-forum.com/forum/modding-forum/284030-wick-materials-safe-vs-dangerous.html
I live vicariously through other rba'ers and I'm still using this German Silica from RTD because I haven't tried cotton yet. Besides, a hot coil will kill any RHP transmitted diseases! Stick a pin in it - wrap a coil - job done. prepare it!! with what - a pep-talk? I like to give my wick 'n wire pep-talks, folks
it's this weird thing with my buddy and cotton wool wicks, i.e. they are crap and don't last! 'oh but it only takes 2 mins to change them (and use another 5ml of juice to wet them)'
My buddys preferred wicking material is XC-116 ceramic wick. (Kiln-treated per 3M specs)
I'll be getting my XC-116 here:
XC-116
RhP
Pardon me if this has been asked before but what are the differences between the Kayfun V3.1 Alpha, Beta, Delta, Gamma, and Brushed? They are the same price at intaste, is it just the finish? I'm on the waiting list for KFL.
RHP
RHP
Those are just finish differences. I currently have:
3.1 Delta = Polished
3.1 Beta = Matte
I find no other differences between them besides the finish.
Edit: of course, the Kayfun Lite is always brushed finish.
Someone did answer your question a few posts back, I believe.
As stated though, the types of replacement parts you are requesting are not available for purchase to my knowledge. You would need to purchase an entire device to access replacement parts such as the deck/posts, etc.
Thanks Digitals, my GP hero. I am currently on the waiting list at Vape Rev & inTaste both for the KFL. Normally waiting lists are a bummer for me because I'm only impatient when I have money. Now after laying down so much coin on some brand new quality Mechanicals I'm broke as a joke.
Folks, I even tapped my mum to help me buy some laser slotted Boges and I'm a grown ... man! Don't worry though, I'll pay her back eventually (guilty conscious for being a jerk in my youth).
And then when Digitals led me to Vape Rev and I heard Dusty D mention here about inTaste.de, I feel like a kid in a candy store. Well, once I have money again. Now I need to consider selling in the classeys which I've been putting off for the longest time!
RHP
Folks, I even tapped my mum to help me buy some laser slotted Boges and I'm a grown ... man! Don't worry though, I'll pay her back eventually (guilty conscious for being a jerk in my youth).
And then when Digitals led me to Vape Rev and I heard Dusty D mention here about inTaste.de, I feel like a kid in a candy store. Well, once I have money again. Now I need to consider selling in the classeys which I've been putting off for the longest time!
RHP
Last edited:
- Status
Similar threads
