It depends on the site you order from. Some will still include the VAT fees, some won't... Most i've been on, when you put it in the cart and get an estimate on shipping, it will deduct the fees automatically. Cloud9 has never done that.
- Status
Lookin' good, bustabo. Plenty of juice, but I worry about your fuel level. At least you're not dripping while driving 
Loving the kfl+, but having a bit of an issue with condensation.
Running a 1.5ohm coil with a cotton at 3.7v. Changed the wick a couple times since Friday when i got it.
Doesn't seem to have any leaks, just builds up condensation in the mouthpiece,and the base where the mouthpiece go.
I clean out the mouthpiece and base every 30 minutes or so.
Do you guys have the same happening? I just have to get used to it,and blow out the condensation every now and then?
Beside from that it works great.
Running a 1.5ohm coil with a cotton at 3.7v. Changed the wick a couple times since Friday when i got it.
Doesn't seem to have any leaks, just builds up condensation in the mouthpiece,and the base where the mouthpiece go.
I clean out the mouthpiece and base every 30 minutes or so.
Do you guys have the same happening? I just have to get used to it,and blow out the condensation every now and then?
Beside from that it works great.
No condensation issues in the mouthpiece here. Not sure what the issue is. Does it do that with different juices or just one juice? Make sure all your orings exist and are not damaged and everything is snugged up.
If everything is snug, and the orings are where they should be, I would try loosening the airflow screw. Just a quarter turn. When the draw is too tight, it pulls more juice into the chimney that might not be atomizing completely.
I wish i had a good camera. I just rewicked the KLite on the right. Grenada in the Klite on the left, GVC in the other 2.
I love my Kayfuns!! All with micro coils n cotton, simple and cheap.
I love my Kayfuns!! All with micro coils n cotton, simple and cheap.
thx, too bad the picture is sooo blurred. I have a decent camera, maybe one day i'll learn how to use it properly
That seem to have fixed it! Thanks!
Can't really tell much of a difference between the tightness of the draw,keeping the screw almost flush with the base
That seem to have fixed it! Thanks!
Can't really tell much of a difference between the tightness of the draw,keeping the screw almost flush with the base
I'm glad that worked...!
That seem to have fixed it! Thanks!
Can't really tell much of a difference between the tightness of the draw,keeping the screw almost flush with the base
I have the original KFL (not the plus) but have noted the many different users of the plus set their air flow control at all sorts of different settings. I think some have said they even pull the screw all the way out. I don't know because I've never had the air flow controller (and don't miss it). But the point is I think you should probably monkey with the air flow settings to see what works best for you.
- Status
Similar threads
