Killer 705 atty

[FeistyAlice]

I can see lots of people torching, dry-burning and keeping their setups for weeks.

Is it just me with steeped tobacco juices that recoils daily or every other day? I haven't found dry-burning efficient and all that dryburn, torch, wash dry seems a lot of hassle for a coil and 8 cms of silica....Plus I would need at least 4 killers to be able to vape while mantaining the other two. With recoiling, it takes 10-15 minutes for 2 killers + 1 dripper...

As for the cost of recoiling daily, if it's 40-60 cents, in comparison to analogs, I guess I can have this...

Any advantages of using a setup for long period of times (aside from the cost)?

See my post a few above. My juices gunk almost anything in a day. Doing so many high heat torchings, for five weeks, same coil and wick, may have been responsible for the ceramic cup "fusing" to center post.

It takes only a few minutes to remove from PV and rinse in hot water. It gets the wick remarkably clean. Dry burning the coil and silica that remains gunked takes just a few minutes.

I'm going to do one Killer doing cleaning with water and dry burning and second with torch and dry burning and compare after a few weeks.

I have four Killers and one eBaron. I uaually have two going on REOs so I have something to vape while cleaning other.

Feisty Alice

Sent from my SPH-L900 using Tapatalk 2

 

[FeistyAlice]

How often do the ceramic cups need to be replaced with an average kind of e juice? Does it come with anything when you order it?

It doesn't come with extra cups but they are common CE2 cups. You may be able to order them with killer. Greek vapes probably have the R and NR wire and they do have one size silica wick. I sent an inquiry asking if their wick is same used for Killer and what length you get for price. Haven't checked my email since this morning. If it is what is used in Killer I'm ordering some. It seems to be better silica than some I've ordered US sources.

Feisty Alice

Sent from my SPH-L900 using Tapatalk 2

 

[Yail Bloor]

Greekvapes does indeed sell replacement cups in a 5 pack with the wick and coil installed ready to use. I just got 5 myself because I imagine one could simply boil and/or torch used cups as needed, though I am not sure of that.

 

[Faylool]

Hmmm. Same with mcArb then and how long depends on juice. Did you get The mcArb with nr wire? Anyway. Where will you be posting your experiences with those? Im getting too shy of Killer for my level of experience. If there is user error happening id be the first one to do any of those errors and then some. I have TheEcig clear pyrex with chrome caps 6 ml.slims tanks. If the killer doesnt fit that ill be bummed. Not a lot of people talk about his tanks but they are what i like. Doesnt happen to be a Killer owner here who knows how it fits in Johns tanks at TheEcig ?

 

[tmcase]

I'll be getting at least one to try. They fit all the smaller REO wells but probably not many of the brass catch cups on wood REOS. They are pretty fat but short.

Well damn. I have Woodvils. I got a larger catch cup on the full size Woodvil but not on my 18490 so I guess I could use it on the full size Woodvil. We'll see after you review it.

 

[FeistyAlice]

Well damn. I have Woodvils. I got a larger catch cup on the full size Woodvil but not on my 18490 so I guess I could use it on the full size Woodvil. We'll see after you review it.

I certainly have a few Woodvils to try it on. Interestingly some of the largest cups are on my 18490s. I haven't had any cups upsized but probably will have only the ones I have sex changed from 801 to 510 upsized. I have four of the original 801 Woodies I'm leaving as original 801, though. The Killers, of course fit all the cups/wells. I plan on torching at least two of the killers, maybe three. Reomizer 2 will go on sale tomorrow night Eastern 7:00. There should be enough to meet opening demand. Knowing how fast Robert ships they could conceivably arrive to most people by Sat.

Main problem "squeezing" too fat RBA, with bottom air intake, into the brass cups, if they do fit is air flow is restricted but Romizer has hole in cap for air. Robert modded the base small enough for the Mini but only enough to fit in the shallow wells.

I'll say, for gazillionth time, Killer fits virtually any well or cup for BF or dripping. My poor ERAs and Hornets have sat idle since receiving my first Killers. Sold two ERAs and two Reomizer ver1 since, also. Surfaces and A7s have been neglected, too.

Feisty Alice

Sent from my SPH-L900 using Tapatalk 2

 

[tmcase]

The ver2 is, again one he has modded, but he says they will be sturdier. The base, inside, is ceramic platform. No NR wire will be needed as with ceramic cup styles.

Is he remodding the Reomizer V1 or is he using a differernt RBA this time?

 

[FeistyAlice]

Is he remodding the Reomizer V1 or is he using a differernt RBA this time?

Totally different RBA. There is a thread discussing it over at ECF reosmods section. Pictures first post by Robert.

Feisty Alice

Sent from my SPH-L900 using Tapatalk 2

 

[tmcase]

Totally different RBA. There is a thread discussing it over at ECF reosmods section. Pictures first post by Robert.

Feisty Alice

Sent from my SPH-L900 using Tapatalk 2

Thanks, I go look for it.

 

[misplacedsooner]

think there will be a round 2 fb coop for the killer and all the ebarron stuff soon

 

[Absintheur]

My Rapid tank arrived and it is making the Killer a real joy to use. It fits great in both tank sizes and there has been zero leaking from the bottom plug. Unlike my side fill it doesn't flood when filling either and my pipe tips will all fit. Plus it looks good on the Caravela...

 

[finagle69]

My Rapid tank arrived and it is making the Killer a real joy to use. It fits great in both tank sizes and there has been zero leaking from the bottom plug. Unlike my side fill it doesn't flood when filling either and my pipe tips will all fit. Plus it looks good on the Caravela...

Great. I have one inbound as well. Looks great on that mod.

Sent from my SGH-I717 using Tapatalk 2

 

[alanyourmouth]

think there will be a round 2 fb coop for the killer and all the ebarron stuff soon

where did you see that?

 

[tmcase]

Great. I have one inbound as well. Looks great on that mod.

Sent from my SGH-I717 using Tapatalk 2

Where did you get this Rapid tank? I googled it and found nothing.

 

[finagle69]

Where did you get this Rapid tank? I googled it and found nothing.

Finvape

Sent from my SGH-I717 using Tapatalk 2

 

[Absintheur]

"RAPID" tank, stainless steel/glass | FinnVape - Sähkösavukkeet ja nikotiininesteet

 

[tmcase]

Finvape

Sent from my SGH-I717 using Tapatalk 2

Thank you.

 

[tmcase]

"RAPID" tank, stainless steel/glass | FinnVape - Sähkösavukkeet ja nikotiininesteet

What did it cost with shipping?

 

[finagle69]

They're not cheap. I think its around 40 Euro or so.

Sent from my SGH-I717 using Tapatalk 2

 

[tmcase]

They're not cheap. I think its around 40 Euro or so.

Sent from my SGH-I717 using Tapatalk 2

Do you mean $40? They cost 28 euros so shipping can't be $12 euro's more could it?