Liquinator Tanks

[drac]

Hi all
Have been trying a few different tanks lately and for me the Liquinator is the hardest to fill. I find it hard to slide the carto down to fill then push back up. I might try adding a screw of some sorts to the side of the tank to act as a filler hole thus saving the wear and tear on the washers when re filling. Has anyone tried this yet. Thanks in advance
Drac

 

[Chinner]

That's weird! I have a liquinator tank, and I find the carto kind of loose. The vpx tank I got from jack is much tighter but I don't find either of them that hard to fill. Wish I could be more help

 

[drac]

Thanks Both my vpx tanks are easy to fill as the carto when pulled & twisted is real easy. I have 3 Liquinators and they are all the same. Must be the Manitoba humidity or something.
On a side note how do you like your provari now that you have one. We are just about ready to get another High End Mod
Drac

 

[benriz]

I am not a big tank fan, I always have trouble with over-wicking. Ofl the tanks I have tried, the liquinator is (I believe) among the poorest, it literally falls apart if you look at it hard. If your a tank fan, try the one from ElectroNicStix.com. they are cheap and work better than most I have tried

 

[drac]

Thanks I'm not so much a tank fan, more like a lazy fan. I drill my own cartos and they seem to last 3 week +
I will have to take a look at those tanks you mentioned.
Drac

 

[benriz]

Maybe it's just me, I punch my own two, but i always get flooding on every other carto. I have a friend with dermal tool I plan to cut one with that, maybe i punch too hard???? when they are on and working they are great but i have spilled a lot of liquid with these things, I am sure the design will improve with time

 

[Danesnpits]

Hi all
Have been trying a few different tanks lately and for me the Liquinator is the hardest to fill. I find it hard to slide the carto down to fill then push back up. I might try adding a screw of some sorts to the side of the tank to act as a filler hole thus saving the wear and tear on the washers when re filling. Has anyone tried this yet. Thanks in advance
Drac

What i did with my liquinator is first cleaned it out with soap and water, then let it dry completely. Then I took some vg and smeared it around the inside. Worked like a charm.

 

[Crazy Canuck]

I got a liquinator a few weeks ago, but have yet to give it a try... I accidentally ordered the 3.0 ohm cartos, and I only have 3.7 devices, so it's sitting in my tacklebox.

Although the yellow DT they sent me is awesome, and sitting on my eGo PT

 

[vise]

...how do you like your provari now that you have one. We are just about ready to get another High End Mod
Drac

I too am looking at the Provari as an upgrade. Kind of sitting on the fence right now, just waiting for someone to push me over the edge towards buying it.

 

[drac]

Hi I had a bunch of old cartos lying around so just peeled the tape off, boiled them and most of the glue wiped off easy. Then drilled a couple of holes in them and good to go. I use them for testing or bad juice that I want to try.


Drac

 

[drac]

Hi I also wiped with VG or juice when first assembling them and that made it easier. Problem is when I have to refill them. I go thru about 3 or 4 tanks a day and am refilling a lot.

 

[Danesnpits]

Holy crap Drac, u are a vaping King! My liquinator was not made for the omega mod unfortunately. I have the 5ml tank, and since the omega is top activated, the liquinator takes up the whole diamter of the omega, thus not allowing my finger to press the top button. Dang it all. With the 3 mods I have, my omega won't work, the threading on my joker is gone so it won't stay on, but I do need to give it a whirl on my xhaler and see if that works. Let's hope, or this liquinator will have to go on top of my 510 ecig..and that will look like a lolipop. Dang it.

Ok, just tried my liquinator on the ol' xhaler and sure enough, it works! Really nice too!! I forgot about my electro vapers torch. Dang, this works great in that too! Well there we go. Problem is solved. This liquinator by http://www.vaporescence.com/ is amazing! I got mine with the pink fluorescent sticker, burnt orange o rings, black outside rings and a yellow and white swirly drip tip. Now I am stylin'!

 

[Dusty_D]

Holy crap Drac, u are a vaping King! My liquinator was not made for the omega mod unfortunately. I have the 5ml tank, and since the omega is top activated, the liquinator takes up the whole diamter of the omega, thus not allowing my finger to press the top button. Dang it all. With the 3 mods I have, my omega won't work, the threading on my joker is gone so it won't stay on, but I do need to give it a whirl on my xhaler and see if that works. Let's hope, or this liquinator will have to go on top of my 510 ecig..and that will look like a lolipop. Dang it.

Ok, just tried my liquinator on the ol' xhaler and sure enough, it works! Really nice too!! I forgot about my electro vapers torch. Dang, this works great in that too! Well there we go. Problem is solved. This liquinator by Vaporescence - eCigarettes, Accessories, US Made eLiquids is amazing! I got mine with the pink fluorescent sticker, burnt orange o rings, black outside rings and a yellow and white swirly drip tip. Now I am stylin'!

D&P, a shorty 510-510 connector will help you with the top activation on the Omega. It gives you just enough separation to rest your thumb on the top of the Omega to press down with a tank. I'm using it that way with my Depth Charge from Vapor-Age. Another method would be the pinch and press, where you have your thumb and index finger around the tank, and you press downward so that the plunger makes contact with the battery. Try these two methods and see what works for you.

 

[Crazy Canuck]

...and a yellow and white swirly drip tip. Now I am stylin'!

That's the one

 

[Danesnpits]

D&P, a shorty 510-510 connector will help you with the top activation on the Omega. It gives you just enough separation to rest your thumb on the top of the Omega to press down with a tank. I'm using it that way with my Depth Charge from Vapor-Age. Another method would be the pinch and press, where you have your thumb and index finger around the tank, and you press downward so that the plunger makes contact with the battery. Try these two methods and see what works for you.

You are awesome! Does happy jack carry the 510-510 connectors? Never bought one of those so want to ensure I know what I am getting I wonder if I bought one for my joker, maybe the liquinator would actually stay in!

 

[zer0ith]

Worth its weight in gold

From the other thread

 

[drac]

I always put a 510-510 on whatever PV that I own. Then I use a 510 battery extender then my tanks. Sometimes I add home depot washers if I think there will be some play due to the extensions. I just got the 5.5 liquinator and could not screw it on the GLV without extensions. Amazing what we will do to make things work
Drac

 

[Dusty_D]

You are awesome! Does happy jack carry the 510-510 connectors? Never bought one of those so want to ensure I know what I am getting I wonder if I bought one for my joker, maybe the liquinator would actually stay in!

I'm pretty sure that Jack carries them but I bought mine from Madvapes. They carry the sealed as well as unsealed versions. I prefer to use the sealed on the Omega, so juice does not get down to the threads of the device. The unsealed are good on bottom feeders. Here's the links to the two types:

V2 510 Shorty Extension

V2 510 Shorty Extension Sealed

 

[DocBurN]

I dont have any tank yet, just got back in the vaping game after a year.. what tank would you suggest me to buy and where ?

Vaporescence is in tx and happy vapor is all out..

Any info is very welcome..

 

[VIPOD]

If you’re a tank fan, try the one from ElectroNicStix.com. They are cheap and work better than most I have tried

Agreed....I wasn't a tank fan, but purchased a 5ml J-Tank from ElectroNicStix.com, combined with a Dual Coil XL carto...great vape, no leaks, and easy to fill. I liked it so much that I just purchased two others yesterday...on sale for $11 each, shipping is cheap, and a 7% discount which you can find on their ECF thread.

However, at the moment their XL dual coils w/the punched holes are sold out (make certain you always purchase the stainless steel, not worth the black because you need to mess with the glue). Their 3ml j-tanks require either the boge carto’s or the standard size dual coils (not on sale at the moment).

Punching holes in carto’s can be challenging, need to be careful of the expansion….you're best option is to dremmel a slice thru your carto (many YouTube videos on the net).