listing side by side mods
- Thread starter drugarth
- Start date
- th_trl_thread_readers 0
Hi all, just signed up, enjoyed reading this thread ever since missing my beloved Tesla Stealth 40w mods (I had 2 of them) and can now no longer buy them anymore. I settled on a Techmod as my replacement, but I am really after a new tank. I have been using a Siren 24mm 4ml which is fine other than its too tall for the mod and ruins the asthetics. What I would like is something that has:
24mm diameter
MTL RTA
Around 30mm height to match the mod
As much capacity as poss
The best I can come up with at the moment is the Berzerker V2 but its actually 35mm and only 2ml. Surely when we are running 24mm tanks we can fit more than 2ml in them, even at only 30~35mm tall?!
Anyway a quick pic of what I have, amazingly I used this tank on the 40w Stealth and it fitted perfectly, it was the most compact, high ml setup I have ever had!
24mm diameter
MTL RTA
Around 30mm height to match the mod
As much capacity as poss
The best I can come up with at the moment is the Berzerker V2 but its actually 35mm and only 2ml. Surely when we are running 24mm tanks we can fit more than 2ml in them, even at only 30~35mm tall?!
Anyway a quick pic of what I have, amazingly I used this tank on the 40w Stealth and it fitted perfectly, it was the most compact, high ml setup I have ever had!
Attachments
Looks nice.
Maybe a Pioneer? 3.7ml, and generally nice height for my SbS mods. Most of mine have deeper wells than your TM though, and I'm not certain on the exact height right now.
Pioneer RTA by BP Mods
Cheers for the suggestion, I will try and find out the exact length but from pics it looks as long if not longer than the Berzerker, plus its 22mm. I would like to keep 24mm if poss to match the mod. Shame cos 3.7ml is fine. I have heard that the non TPD Berserker is actually 3ml which is much better than 2ml but I cant confirm if its longer than the TPD version. The only size I can find for a Bezerker is 35mm ex drip tip which I can live with but would prefer 30mm.
Oh and seeing as this is a SBS thread I thought I would show my old mod for ....s and giggles, beaten up cos it was actually run over by a car (and still worked!). Needed a fair bit of Dremmeling to fit a 24mm tank tho..
Oh and seeing as this is a SBS thread I thought I would show my old mod for ....s and giggles, beaten up cos it was actually run over by a car (and still worked!). Needed a fair bit of Dremmeling to fit a 24mm tank tho..
@NathanL maybe have a look at the 24mm Dvarw DL FL or 22mm MTL FL. In the pic below I have each setup with 3.5ml tanks.
On the right is the 22mm MTL FL. The top of the RTA is level with the top of the Mixx. On the left is the 24mm DL FL and it's ~2-2.5mm taller. Both are currently setup for fairly airy MTL.
Don't know what your budget is. Mine are authentic purchased from KHW Mods. There are clones available for both. Several folks on ECF have purchased the clones and are happy with them.
On the right is the 22mm MTL FL. The top of the RTA is level with the top of the Mixx. On the left is the 24mm DL FL and it's ~2-2.5mm taller. Both are currently setup for fairly airy MTL.
Don't know what your budget is. Mine are authentic purchased from KHW Mods. There are clones available for both. Several folks on ECF have purchased the clones and are happy with them.
Wow thats really nice, and they do a 24mm MTL version as well, and only 28.2mm tall for the 3.5ml version. All perfect...except I dont think I can run to the required €100 for one.. as much as I hate to say it, it would have to be a clone or nothing 
The Pioneer is 32mm tall (just measured it).
Cracking up at your Stealth. Mine's beat up (I'm anything but careful with it) but still has all its parts.
So far it seems there are only 22mm dvarw FL MTL clones out there.. 24mm has been cloned for DL only
Sent from my AC2001 using Tapatalk
How tall is a 24mm KF lite 2019 with and without an extension as well as it's capacity? thank you!
According to the SvoeMesto website, the 24mm KFL is 33mm tall and 38mm tall with extension, capacity is 3.5ml and 5ml respectively.
got this in today:
To tell you the truth - it's a bit janky - you can see the mis-alignment of the top plate and my Serpent doesn't fit quite flush either. Suprisingly heavy too.
Still - it's kinda a neat little device.
To tell you the truth - it's a bit janky - you can see the mis-alignment of the top plate and my Serpent doesn't fit quite flush either. Suprisingly heavy too.
Still - it's kinda a neat little device.
Have you tried unscrewing the two hex screws and re-seating the top plate? It kind of looks like the chip isn't sitting in the slots of the plate correctly. My 510 also had some residual burrs that I scraped off, maybe yours has one that's preventing the serpent from sitting flush.
I was also surprised by the weight, the 18650 tube is pretty hefty.
I've been vaping with the SXK Supbox DNA mod for a couple of weeks and thought I would post some thoughts. This is the side by side mod that can use 510 atomizers and Billet Box Boro tanks. In short, I like it alot.
It is sort of a stubby mod made of ABS and has a rugged feel I really like. No worries about scratches here. DNA 60. Mostly use as with 510 atomizers but like having the Boro option. Switching between the two modes is a bit more fiddly than I think it needs to be, but it works well. The mod has been totally reliable.
Boro mode with Vapesnail
510 Mode with Kayfun Prime and Kayfun 5 tank:
It is sort of a stubby mod made of ABS and has a rugged feel I really like. No worries about scratches here. DNA 60. Mostly use as with 510 atomizers but like having the Boro option. Switching between the two modes is a bit more fiddly than I think it needs to be, but it works well. The mod has been totally reliable.
Boro mode with Vapesnail
510 Mode with Kayfun Prime and Kayfun 5 tank:
Last edited:
