Mark Bugs Bottom Feeding Rebuildable Atomizer (prototype) initial impressions
- Thread starter clyde2801
- Start date
- th_trl_thread_readers 0
- Status
I'll see if I can get my husband to do a video. No guarantees.
Has everyone seen my contest? http://www.e-cigarette-forum.com/forum/pay-forward-pif/322554-back-school-contest.html
I also found this video on YouTube enjoy M8s! Unpacking "Chalice" repairable bottom feeder atomizer - YouTube
Does anyone have the shipping company site addy ? So I can see if I can track that way ? Just curious where mine may be ??
Was it like an R#######?
I just use the plain USPS site and plugged the number including the R in.
Sent from my iPad using Tapatalk HD
The tracking info came from an email from PayPal. Hope this helps.
1. First off, get all your stuff together... including the scissors that are not shown here...
2. Cut a 1" x 1" square of 400 SS Mesh. Fold over 1mm on one edge and flatten it out smooth.
3. Now wrap starting from the side opposite the folded edge around a needle or small screwdriver.
4. Once it is completely rolled, slide it off the needle or screwdriver, and roll it tight between your fingers.
5. Now clamp the end of it with a pair of vise grips and heat up till it glows red with a lighter, or a butane torch if one is available.
Continued in the next post...
2. Cut a 1" x 1" square of 400 SS Mesh. Fold over 1mm on one edge and flatten it out smooth.
3. Now wrap starting from the side opposite the folded edge around a needle or small screwdriver.
4. Once it is completely rolled, slide it off the needle or screwdriver, and roll it tight between your fingers.
5. Now clamp the end of it with a pair of vise grips and heat up till it glows red with a lighter, or a butane torch if one is available.
Continued in the next post...
Last edited:
I have the tracking # but no way to track it. USPS won't track it I'm in Canada 
6. Now wet the wick with PG, VG, e-liquid, or NIC base. Ignite it with a cigarette lighter and let it burn itself out.
7. Do step 6 3x, then do step 5 again, then do step 6 3 more times.
8. Now heat the coil wire till it's red for only a moment. This is a quick motion.
9. Wrap your coil around the mesh while it's still in the vise grips, just to keep things easy.
10. Attach to atomizer and snip off excess coil wire.
11. Slide the mesh over till you find the spot with the least hot spots.
Continued in the next post...
7. Do step 6 3x, then do step 5 again, then do step 6 3 more times.
8. Now heat the coil wire till it's red for only a moment. This is a quick motion.
9. Wrap your coil around the mesh while it's still in the vise grips, just to keep things easy.
10. Attach to atomizer and snip off excess coil wire.
11. Slide the mesh over till you find the spot with the least hot spots.
Continued in the next post...
Last edited:
12. Now snip off the excess mesh.
13. Drip some liquid on it, and test it. Use a toothpick to shift the coil around until you alleviate all the hot spots.
14. Now screw the top back on and vape on!
13. Drip some liquid on it, and test it. Use a toothpick to shift the coil around until you alleviate all the hot spots.
14. Now screw the top back on and vape on!
Last edited:
Great tutorial for SS mesh. Also put a cig paper over the mesh before you wrap the coil. This keeps the coil directly off the mesh. Less shorts. When you are checking for hot spots it will burn off.
I read about that trick, but I don't know how comfortable I am with burning paper to do this... I really don't wanna accidentally vape the ashes. Especially when I can successfully make it work without that.
You could all ways give it a gentle blow job to make sure no ashes left.
I know some of you will read that wrong so get your minds outa the gutter
I wasn't going to say a thing! Burnt paper turns to carbon. Like the stuff we just made on that SS wick. The black stuff. I use gift bag paper so I don't have the urge to roll anything up.
I have the tracking # but no way to track it. USPS won't track it I'm in Canada
Try tracking it with your local carrier?
Tried it. Even tried USPS. They can both barely track their own stuff most of th time any ways
Well mail has come and gone here, and no Chalice. Looks like no weekend vaping on the Chalice... Lucky Brits...(British? UKers? What's the plural for British person's?)
- Status
