Merged old sticky threads (5)

[Coffee Addict]

Got my replacement v1 almost the same time I got my v2.
The v2 doesn't seem to have the problem the v1 has.
It seems to just activate when it feels like it or if I move my finger around on the switch.

 

[Amy]

Happy happy (belated) birthday, Ludo!

 

[Kate51]

I've got a V1 in the mailbox right now, switch gave out completely after limping along a couple days, would work ok, then not. So I stripped everything off to return it, hope they don't mind that, because they still owe me an atty from the auto I returned. He said to leave the atty in it so it could be looked at, but they didn't send a replacement. Geez. So I kept the battery cover as well. Never know.

Edit: mine was a couple days short of two months old.

 

[PuffinStuff]

I have a V1 that is still performing perfectly. No problems from the get-go.

 

[NekoGurrl]

My V1 is still working great. Was my goto PV since I got it, then tried 6v... Now waiting on the Dura adapter for the stick to put it back in service.

 

[RenaissancePuffer]

Just an added thought, don't "twist" the cart into place, when you do that the bridge in the atty will push the cart filler away from it, and it also can imbed fibers onto the mesh by the twising motion. Straight in, pull straight out.

And herein lies a trick that I am still trying to master I have found that screwing the atomizer into the stick often times will screw the cart inside the atomizer. On several occassions I have pulled the cart out to see part of it has been pulled out due to it being tangled into the mesh on the atomizer.

On a good note, it seems like you dont need to torque the atomizer on for it to work properly, I can usually screw it in until it seems to stop (again, not tightening further), and get great performance.

 

[Kate51]

It's been suggested to use the white cover that comes with the cartridge to put over the atty. It fits very tight, and you can usually twist it in easier. I don't have good finger joints, so must use a tool to do mine, especially a new one for the first couple times.

 

[Capt. Dan]

My V1 works most of the time. I have had it for about three or four weeks and is my primary and now my only PV. The switch has been acting up the past couple of weeks. It is sticking in the on position, but only after a full day of using it. About the time I get home from work it starts up. I just hit the button for a second and vape away, it goes until the cut off. Let it sit overnight and the next morning seems to work good. The past couple of days the switch has been acting up and not working off and on. I have never realy had any leaks but when pulling the atty out it is sometimes damp, mostly when I have been outside in the heat. Guess we will se how it goes.

 

[JustJulie]

I'm still going strong with my V1 (which is one of the limited editions). The paint is wearing along the bottom, but otherwise it's perfect.

 

[Rexa]

I've become very good at unscrewing my atomizer directly with my teeth - haven't chipped anything yet!

 

[1010chrissy]

I was sent a replacement V1 cus the initial one was broken. The second V1 was AWESOME. But I got the V2 to replace it or upgrade it and the button is touch and go with the V2 so I was returning it and keeping the V1. Well since I emailed Ethan about this decision, my V1 completely died on me. Dont know why, dont do a flicker or a puff of vapor or glowing led....waaah So now I am sending back both the V1 and the V2

 

[Kate51]

Rexa, DON"T DO THAT!

 

[Elendil]

The tips that come with 201 attys(they are compatible with the JS) are perfect for tightening and loosening the 801 attys.

 

[FormulaW66]

Thanks for the help everyone but now got a worse problem the button is sticking. guess im going to warranty it.

Wow janty usa is awsome. emailed them this morning about the broken button and they already got one in the mail same day. i think it helped that i ordered a kiss box today too they said it should be here saterday. gonna clean the attys good and be ready for it when it gets here.

 

[quovadis]

I need to know if any of you guys have some attys on the janty stick that give consistent good puffs, and others that give off a horrible burnt taste from time to time?
I have about 6 atty's here, some give good puffs always, and some give a harsh burnt taste and smell.
The carts are full.


Some of the Janty classic attys fit really tightly in the hole, and some slide in really easily?
anyone else found these problems?

 

[SKYYcamel]

Is there any other place, other then the Janty site, to get the 901 adaptor for the JS? Apparently Janty USA is having trouble getting inventory.

 

[Elendil]

Almost all attys require a different "break in" period. Some vape well from the get go, and I have had some that take a couple of weeks to produce at maximum efficiency. Each atty really does have a unique personality.

You did get my PM about your burnt issue??

 

[RaverCJ]

I got a bad switch. Doesn't always turn on when pressed, regularly does not shut off when released. Currently unusable.

My JS V2 worked like a dream for a week. Now, it seems my switch all of a sudden went bad. I can now hear a "squeaky" sound when I press on the switch, and my JS V2 seems to be "sticky," remaining activated even after I've lifted my finger off the switch.

 

[RenaissancePuffer]

Wow janty usa is awsome. emailed them this morning about the broken button and they already got one in the mail same day. i think it helped that i ordered a kiss box today too they said it should be here saterday. gonna clean the attys good and be ready for it when it gets here.

Jeff and Ethan are both on top of things. You read a lot on the forums about suppliers having issues, sure they have great prices, but it's not worth the hassle. It's nice to know when something is broken, Janty stands behind their warranties 100%. It only helps that you can place an order monday morning and come home during lunch on Wednesday and it's in your mailbox.

Peace of mind is worth an extra dollar spent IMO.

 

[nicosnack]

I can now hear a "squeaky" sound when I press on the switch,

I too have the squeaky sound.