Micro Coil for the RBA on your REO

[pdib]

Nuppin' . . . . .. yet.











gotta do some field research 1st. Get back to ya'.


I'm going with Alan Shepard wire, myself.

 

[pdib]

You know, XObox, I was initially going to incorporate a Xobe-driver too, and I hadn't even seen your crack-driver yet. But that would have resulted in more wire lengths than I wanted. Anyway, I'll sit back and wait for your version.

 

[oshiiii]

Anybody try a micro coil dual coil setup?

 

[darkzero]

Anybody try a micro coil dual coil setup?

I have.... I still prefer a single micro though.

 

[Awkwardly Awesome]

You guys clean your tubes out when you switch flavors? Always seem to have a little of my old juice left in there.

I unscrew my bottle but leave the tube in it, then slide the bottle to the point where the tube isn't submerged in the juice that is still in the bottle. Then I cover the air hole on the RM2 and blow through the drip tip. It helps force any remaining juice back down the tube and into the bottle. The only time I will usually clean it out is with my strong Absinthe/ Black licorice flavors.

 

[Xobeloot]

You know, XObox, I was initially going to incorporate a Xobe-driver too, and I hadn't even seen your crack-driver yet. But that would have resulted in more wire lengths than I wanted. Anyway, I'll sit back and wait for your version.

May be a couple days. Need to get in some wife time...

 

[ChrisEU]

Reo Mini 14500 with AeroVapes BF "Satin" finish.
1.5 mm drill bit, 0.30mm Kanthal, 1.5 ohms

The atomizer has the air flow through the 510 connector and that is unusable with this type of setup. I'll find time in the evening to drill a hole in the top cap.

Sorry the Mini is so dirty - it's my "emergency mini" that I carry with me almost all the time.

 

[UKPaul]

I still love those pics DZ

 

[fullsleeve]

I still love those pics DZ

seriously. those are some killer pics and beautiful coils. they are desktop background worthy

 

[soulja11c]

Anybody try a micro coil dual coil setup?

Just built it about 5 minutes ago...28ga kanthal 12 wraps .7 ohms....letting the wick saturate gimme a min.

 

[soulja11c]

First impressions(Keep in mind this is my first time with cotton and micro coils:So starting out I get very little flavor and I can taste the cotton, normal? but I'm assuming that there is a coil break in as with most builds.

 

[Statistic]

For me there is a weird off flavor for the first few puffs every time I replace the wick. Goes away quickly though and it's all good after it's gone.

 

[Xobeloot]

I can always taste the cotton the first couple puffs, but having very little flavor sounds to me like the cotton hasn't fully wicked yet.

 

[ukeman]

View attachment 243726

Just built it about 5 minutes ago...28ga kanthal 12 wraps .7 ohms....letting the wick saturate gimme a min.

maybe a bit too much cotton? b/f is easy to keep wet with less.

 

[Xobeloot]

Dibby inspired me last night with his T-top dual coil. So working off that, I did this.

Bottom coil is 17ga ID, top coil is 16ga ID.

Both are 28 nichrome. It measures out at ~.7

The over-under dual

 

[KwhyLE]

hows airflow?

 

[Xobeloot]

airflow (1/16") comes in right at the base of the driver coil and sweeps up the top of it going under the top coil

 

[Xobeloot]

Can sortof see it here

 

[pdib]

Nutty kids today.

 

[Xobeloot]

Nutty