New Genesis type atomizer by DID!

[Uma]

It's the brooklyn in. That video was made just for uma. I'm not a reviewer. Her contacts are going to get to black and hard to clean if she doesn't soon. Do you hear me dirty girl. That's what you should be afraid of uma.


Tony

hahahahah
Tony respect to your help and the special way you give it!
oh Uma please clean your contacts
Tony made this video to see that is easy!! (and he did)

I DID it!! I DID it!!
Let's hope the other whiny brats DID it too!!!
(Tony has funny lookin' puke)

Update:

Well...I went through and cleaned out the center tube and used some 400 grit sandpaper to smooth any edges, and I also replaced the two center post insulators..EUREKA! Everything is working fine now. There was a small burr inside of the 510 connection that I think was the culprit.

SWEET!! Right on!! Let's hope yours was the only burry one that escaped the hatch. What a day for everyone eh.

 

[Uma]

Since I don't know how long it will take for VapeTV to upload the video, so I'm going to share my Dropbox file.
You may be able to stream the first 15 minutes, but you will have to download the file to view the rest of the show.

https://www.dropbox.com/s/retr7y6eiwjg8rw/17 MM Vapors Show.mp4

Thanks!!!
::: off to watch :::

 

[Uma]

That was quite helpful, viewing the Delrin trick to realign the switch housing. I hope to remember it when it's my turn.
I'm up to first popped coil. My first thought? OH NO!! Fresh battery!!! The Poldiac hits too hard for a new coil. Now repeat after me: I must use dying battery with new coils, especially with the Poldiac....

Now I'll go finish watching and watch you have come to that conclusion already.. lol

 

[MiriamWTH]

Watching it again and I still have no clue what a "tark" or "tart" is....

I am choosing to think it is something flattering ;-)

 

[NatGasMan]

I just can't get over these speeds! It makes me go wow every single time!

What you getting?

Sorry if you said already...been very busy at work. Just got home after being at work yesterday at 6:00 am. Boy I'm tired.

 

[B2L]

I don't know if anyone here is following the ss mesh/oxide thread, basically worrying about oxidized mesh producing some nasty stuff when heated to high temps such as those during oxidation. I'm not real worried about it myself but Cyrus posted about his experiment with unoxidized mesh. I figured I would give it a try as I just cleaned up the DID and was setting up a new wick/coil anyway. Long story short, this has been the best flavor I have gotten out of a setup and after a few pulses, using a half dead battery Uma, I have had no shorts or any other issues. I've vaped a full tank so far and am loving it.

 

[Uma]

Tart is an affectionate term used to describe a sexually promiscuous, (& or feisty) woman.

B2L, I still haven't tried the non-torched method, shamed to say. Good to hear it wicks great and is flavorful too. Those were my main concerns with that method. I'll try to boil some up tomorrow & see how it goes.
There's a very interesting, informative thread I've been following elsewhere, with a real chemist in the conversation, and so far, I am convinced that the threads here at ecf are total fearmongering at best. Yet it never hurts to learn new ways to do things, & to be on the safest side of safe that we can be.

haha, Duane, you skipped my old party song by Iron Butterfly. That song would last all night, I swear. I had no idea I was a heavy metal girl way back then lol.
Taking the dremel to the foot was a pretty neat trick to keep in mind, & one I'll try to remember for future troubleshooting with self or others. Nobody's infallible, not even Jim.
It was great seeing the insulators in hand too. Viewers can see what a good material they are.

::: off to play Barbies with Duane :::

 

[Cloud Wizard]

lol, I actually went and listened to Inagodadavita (and Sunshine of Your Love - Cream) after the show since all the younger, hipper, Metal heads veto'd all the 60's Rock-n-Roll (or at least those 2 classics...)

 

[Uma]

They just don't make metal heads like they used to do they.

That was a great show, Duane. Thanks for sharing with us & for not hiding it afterwards. I do hope Gracie didn't accidentally disGrace herself before you got home.

 

[Uma]

Nite all! It's past my beddy by time.

 

[Cloud Wizard]

g'nite Uma

 

[MiriamWTH]

What you getting?

Sorry if you said already...been very busy at work. Just got home after being at work yesterday at 6:00 am. Boy I'm tired.

ehm, some 500 mesh and parts and a bottle of tsikoudia

Tart is an affectionate term used to describe a sexually promiscuous, (& or feisty) woman.

hmmm sexually promiscuous... I wish! I have not had sex in over 3 years!
Although I guess I am sexually promiscuous in spirit

Feisty... yes I do have strong determination

 

[Tonytiger1]

ehm, some 500 mesh and parts and a bottle of tsikoudia




hmmm sexually promiscuous... I wish! I have not had sex in over 3 years!
Although I guess I am sexually promiscuous in spirit

Feisty... yes I do have strong determination

I'll through you one


Tony

 

[Striker911]

Okay. Got me a short DID in the mail today. I have to admit that I forgot how good this product was. No more China junk for me. Now I just need to wait for the taxes to get something good to go under it. Brushed pants and shirt with a brushed DID sounds like a good set.

 

[Eisofen]

where off for a few months, I'm not THAT forum-guy.
Let's wrap it up: I'm using a DID 20 and a DID Gemini since october and never touched any other atty since then. Sold my Odysseus in november. I've watched some videos about wicks/coils and P.Bussardo' reviews about the GE-type attys.. Currently I use AWG 30 for DID and twisted AWG 32 on the Gemini
Well, since my ProVari couldn't handle ~1Ohm coils and I don't like my GG Staehlth THAT much I'm going to order a Poldiac next week
Did anyone tested porous ceramics (FC2000)?
Jim: will you offer them somewhere in the future, since they're hard to get here in the EU?

 

[overall]

I am using the porous ceramic. The 1/8" wick fits perfectly and works. I am still tinkering with the coil. The ceramic does not do low resistance well. Getting ready to pop a 32awg coil on it. Have done ribbon 1ohm and 30awg 1.4ohm so far.

where off for a few months, I'm not THAT forum-guy.
Let's wrap it up: I'm using a DID 20 and a DID Gemini since october and never touched any other atty since then. Sold my Odysseus in november. I've watched some videos about wicks/coils and P.Bussardo' reviews about the GE-type attys.. Currently I use AWG 30 for DID and twisted AWG 32 on the Gemini
Well, since my ProVari couldn't handle ~1Ohm coils and I don't like my GG Staehlth THAT much I'm going to order a Poldiac next week
Did anyone tested porous ceramics (FC2000)?
Jim: will you offer them somewhere in the future, since they're hard to get here in the EU?
View attachment 180217

 

[Tonytiger1]

Take 2.


http://youtu.be/USIC2uoDwnU

Tony

 

[Pete54]

Bada Bing!

 

[MiriamWTH]

στην υγεια μας!

 

[Eisofen]

στην υγεια μας!

Proost!!