NEW RoyalSmokers C-E2 R4 Review, Tips, Info, Help, Video
- Thread starter badkolo
- Start date
- th_trl_thread_readers 0
- Status
it seems this system is dependent on the wick, i pulled out the wick and its a no go.
i reinserted the a new wick and then it works but gets to dry to fast, im sure i can mod this but i will take a break first.
this design is exactly like some of our earlier ideas, as of now the juices im using arent thin enough, ill mod it in a while
i reinserted the a new wick and then it works but gets to dry to fast, im sure i can mod this but i will take a break first.
this design is exactly like some of our earlier ideas, as of now the juices im using arent thin enough, ill mod it in a while
trying now
ok that does nothing, tank is to thick for it to make a difference, its a lot smaller then you think
and this thing is dependent on the wick 100%, im gonna drill a bigger hole to add more wick also so juice flows better.
they come empty and sealed so no prefilled br. im not going out of my way to try thinner juice, i used my octane cigarillo which is thin enough , that works on a e2 so it should work on this but i think the stem hole might be to small, not the stem hole itself but the hole inside the stems bottom.
Last edited:
Maybe drop several drops of your liquid into the wicking first to 'prime' so it can stay ahead of the wicking...
when i soak the new wick and shoot a drp into the stem and then add the tank and fire it up it shoots out plumes of vapor, its cool vapor becuase the ohms are high so at 3.7 its cool but plumes of vapor with super clean true taste but then it starts to not wick well and that dry taste arrives.
so the wicking isnt up to snuff , im gonna try to fix it , the system itself seems like it should work so lets see.
and letting it sit for a few minutes doesnt change the wicking, it just doesnt soak it up to the coil properly.
it isnt a syringe mod or even a ptb'd e2 , thats for sure but when it works it is pretty freaking cool but again with my juice it isnt doing the trick. i need a little time then its disecting time.
so the wicking isnt up to snuff , im gonna try to fix it , the system itself seems like it should work so lets see.
and letting it sit for a few minutes doesnt change the wicking, it just doesnt soak it up to the coil properly.
it isnt a syringe mod or even a ptb'd e2 , thats for sure but when it works it is pretty freaking cool but again with my juice it isnt doing the trick. i need a little time then its disecting time.
Last edited:
I wonder if the wick would work better if it extended up into the tank? Not a very elegant solution though and it would be a messy business changing tanks.
i dont think thats the issue, i think the issue is on the other end where the juice wick and coil meet
Have you tried it with the original or a thinner juice? Answer me dammit. Kids.
The wick in your one picture seemed thick...would it help to pull it out and trying to 'thin' out the strands? fray them a bit?
when im right im right, this is totaly dependent on the wick, this is exactly like our upside down e2 idea.
you cant play with it in any way, the coil is rapped around that wick extra tight, i can try to enlarge the hole and add my own wick and try this again, as is these things dont wick well with my juice. im not gonna worry about that now cause it should work with this juice, its not that thick at all.
you cant play with it in any way, the coil is rapped around that wick extra tight, i can try to enlarge the hole and add my own wick and try this again, as is these things dont wick well with my juice. im not gonna worry about that now cause it should work with this juice, its not that thick at all.
Attachments
Last edited:
Same song, second verse. Could get better, but it's gonna get worse.
I just received an email from Rod.
Enter the word "auction" in the promo box for 50% discount.
I think I will wait until this dissection is over to see if they are worth buying.
I hope its not going to be another remodification of a brand new product, Its starting to get old.
Enter the word "auction" in the promo box for 50% discount.
I think I will wait until this dissection is over to see if they are worth buying.
I hope its not going to be another remodification of a brand new product, Its starting to get old.
As close as those coils are wrapped, it's going to crud over real quick, ain't it?
It sounds like an e2 with one wick strand only. Maybe raidy's mesh would work better than wick.
The E2's problem is that the wick gunks up, and I can damgae the wick even with running water. At least with the E2, I can see the current condition of the coil, and the wick at and near the coil, and mod it.
I thought of a model like this tankomizer a long time ago, I suggested running a wick inside of a large hollow needle, you know like the turkey basting needles?
Well if this thing is really small, I don't think I'm able to get it just yet, the E2 bottle or syringe mod (the transparent mod) is so affordable. Now that you mention how small it is, I think we almost found out that the slightly bigger bottle might be a better vapor machine. I wonder if a certain amount of atmosphere in the liquid reservoir would help the wicking? Do you have to hold this new carto upside down? The e2 mod we have to hold it like a glass of wine, but with this new one does it help if you look at the sky every time you vape?
The E2's problem is that the wick gunks up, and I can damgae the wick even with running water. At least with the E2, I can see the current condition of the coil, and the wick at and near the coil, and mod it.
I thought of a model like this tankomizer a long time ago, I suggested running a wick inside of a large hollow needle, you know like the turkey basting needles?
Well if this thing is really small, I don't think I'm able to get it just yet, the E2 bottle or syringe mod (the transparent mod) is so affordable. Now that you mention how small it is, I think we almost found out that the slightly bigger bottle might be a better vapor machine. I wonder if a certain amount of atmosphere in the liquid reservoir would help the wicking? Do you have to hold this new carto upside down? The e2 mod we have to hold it like a glass of wine, but with this new one does it help if you look at the sky every time you vape?
Last edited:
i just modded it and made it better and still it isnt up to snuff, i can mod this for sure and make it work as it should but the stem hole is to small ,it doesnt flood in any way but its not letting the juice through easy enough, ill keep trying
im gonna fill it with the thinnnest juice i have and see.
im gonna fill it with the thinnnest juice i have and see.
as of now the e2 mods blow this away. but im not gonna knock the design as it seems to work just this doesnt.
but im having some issues with the wicking and im trying tons of things but not much luck so far.
but im having some issues with the wicking and im trying tons of things but not much luck so far.
Good question for the maker of the carto. I also wonder if the maker of the carto has tried the Br-Badkolo E2 version.
No one should be making a $12 cartomizer without first trying your Bad-Br version first imo, lol.
Looks to me like a filler-less mod to a mini/510 prefilled cart.
Where the current systems use the atty bridge to penetrate a foil seal, this uses the atty top to penetrate the tank.
Looks like you can actually disassemble enough to do a visual dry burn, but how many times can it be done before the atty leaks?
Im staying away way too easy to use a regular length R4 or mod an XL or make a syringe/bottle mod
Thanks, bad have fun
Where the current systems use the atty bridge to penetrate a foil seal, this uses the atty top to penetrate the tank.
Looks like you can actually disassemble enough to do a visual dry burn, but how many times can it be done before the atty leaks?
Im staying away way too easy to use a regular length R4 or mod an XL or make a syringe/bottle mod
Thanks, bad have fun
If you can get it to work there are alot of advantages...first you can see fluid level in a conventional package. And if we can find a way of cleaning the atty you don't have to waste juice if things gunk up and start to burn, etc...your juice remains untouched and savageable...
- Status
Similar threads
- Locked
