NEW RoyalSmokers C-E2 R4 Review, Tips, Info, Help, Video

[dannoman]

any 'taste' from the tubing??? and thanks for the info...

For the syringe type mod I use 5/16" X 7/16" vinyl tubing from a farm supply or hardware store . You can cut it to any length you want and it fit's on a carto snug (no leaking) but can be easily removed for dry burn or torching . Drip tips also fit this tubing just right and it only cost $0.30 per FT.

 

[br5495]

I am just realizing that Jensb Raidy mod is only 1.7Ω, just 3 loops, on the 2mm coil-mesh-wick and put out a lot of vapor, while my e2 can have 5 or 6 loops and the 3 e2 strands seem like they're less than 2mm and it hesitates a lot.

here is the link to his video:

http://www.e-cigarette-forum.com/forum/modders-forum/135786-some-homemade-attys-genesis-2.html#post2185968

Are you going to put a 1.7Ω coil in your E2, or make a genesis?

 

[v1John]

eventually a genisis, but what's strange is his mod relative to the e2. So what I'm wondering is what if the E2 just had 3 loops and a radius of about 2mm? Could we get heat out of it properly enough to get better e2s? Mine frequently hesitate, they get tounge tied and don't always wick enough or something, lol. if we can make the e2 better, then I might make both.

 

[br5495]

eventually a genisis, but what's strange is his mod relative to the e2. So what I'm wondering is what if the E2 just had 3 loops and a radius of about 2mm? Could we get heat out of it properly enough to get better e2s? Mine frequently hesitate, they get tounge tied and don't always wick enough or something, lol. if we can make the e2 better, then I might make both.

I don't know whether to hesitate or bite my tongue about replying to that post.

 

[Big Daddy]

any 'taste' from the tubing??? and thanks for the info...

No , not that I can tell .

 

[GenMan]

If anyone is interested I found some thinwall 1/32" polycarb tubing in various diameters that looks like it would server well in mods here. Scroll down a tad and you'll find sizes that run the range from way too big to way too small in 1/16" increments. If you're lucky you might be able to find it in the local pet stores, I wasn't. I ordered from 9/16" down to attempt an ego matched mod. Doing the math it looks like and XL with a 9/16" tank should hold a little over 3ml.

 

[Turbo]

If anyone is interested I found some thinwall 1/32" polycarb tubing in various diameters that looks like it would server well in mods here. Scroll down a tad and you'll find sizes that run the range from way too big to way too small in 1/16" increments. If you're lucky you might be able to find it in the local pet stores, I wasn't. I ordered from 9/16" down to attempt an ego matched mod. Doing the math it looks like and XL with a 9/16" tank should hold a little over 3ml.

Yeah, 'stephenluke' has made some mods from the tubing there. He also used 9/16".

 

[GenMan]

Looking back through the thread I remember seeing his now.Totally missed the supplier at the time. I'd have all the tubes I'd ever need by now if I would have caught that. At least I know the size is good now.

 

[Quick1]

I don't know whether to hesitate or bite my tongue about replying to that post.

"lalalalalalalalalala"

 

[Zoos]

I think they shoot for 2.5Ω and 3.0Ω when they manufacture the E2's, then sell the rejects at another rating, heheh.

long time reader, firs time replying... (in this topic. lol )
br, what Ω is good for Hello battery? best vape, taste?

 

[br5495]

long time reader, firs time replying... (in this topic. lol )
br, what Ω is good for Hello battery? best vape, taste?

Whichever one is best for you, Zoos. I like 3.0Ω or greater for my juice on that battery, but that would too weak for some people.

 

[Zoos]

Whichever one is best for you, Zoos. I like 3.0Ω or greater for my juice on that battery, but that would too weak for some people.

What do you mean - weak? Less vapor? Less taste?

 

[Quick1]

What do you mean - weak? Less vapor? Less taste?

That would be just ...less/weak. It's the same kind of "less/weak" as when your battery runs down.

 

[mister kil]

dang it I am going to end up in Nashville w/o 808d1 cartos next week uggg

 

[br5495]

What do you mean - weak? Less vapor? Less taste?

Meaning not strong enough for some people. Not hot enough. Less nicotine. Less throat heat. Less vapor. That all sounds bad, don't it? For me it doesn't because my sweet spot with a 3Ω E2 is at about 3 volts. Anything more than that ruins the taste of my juice. Taste means more to me than anything else.

 

[Quick1]

Taste means more to me than anything else.

Less important to those of us who still have our teeth...

 

[br5495]

Less important to those of us who still have our teeth...

Y'all just don't know what you're missing, heheh.

 

[mikecup]

I just received my kr808's screwed on the adapter and installed on my chuck.
But a problem here, its like trying to suck a lemon seed thru a straw.
Air flow is good off of the device, I tried it on my ego also, same thing, I cannot inhale, I can hear the atty firing.
Do I need a special adaptor for this 808?

 

[br5495]

I just received my kr808's screwed on the adapter and installed on my chuck.
But a problem here, its like trying to suck a lemon seed thru a straw.
Air flow is good off of the device, I tried it on my ego also, same thing, I cannot inhale, I can hear the atty firing.
Do I need a special adaptor for this 808?

You wouldn't happen to be using a 901 to 510 adapter, would you? The threads are the same, but a 901 does not have the small holes above the threads.

 

[naviathan]

Ok not sure what's been going on here, but somehow I stopped getting updates on this thread...