Sure Oddy. And this setup will increase the capacity of the Ody. We only need a drip tip
Odysseus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo madvapes provari revolution
- Status
Imeo,
One question - it is possible use only upgrade kit for construction of separate repairable atomizer?
I see on photo of upgrade kit:cover, central pins, little base, central cover for ceramic ( but on photo is not ceramic - is inside?? )
I am waiting for a new series of Odysseus, so this could be at least a small toy to reduce waiting
saw many parts of the picture and I think there is a complete atomizer + parts to enlarge Odysseus - is that true, or I'm wrong?
Did me first refill tonight and had leaking out the post, more of a constant drip.
Put an o-ring like in the picture here and no leak.
Thanks harekira and Raagna.
Put an o-ring like in the picture here and no leak.
Thanks harekira and Raagna.
Here's the picture made by Raagna: (extra O-Ring between Nut and Base)
Glad I could be of help K3v1n.
Next time you make a new coil, you simply have to scroll the O-Ring down a few millimeters onto the base, make the coil, screw it in and scroll the extra O-Ring back up.
The problem comes from the non-resistant wire under the nut, which creates a tiny space.
I have no idea why it is so, in Short Mode it didn't matter at all, but in Big Mode it does (maybe the pressure of the extra liquid?)
Another, additional solution is shown here:
Odysseus-Selbstwickler
(post #860 on the bottom of the page)
Try to place the non-resistant wire in the last round before the base, so no extra space will be created, when screwing on the nut.
But the additional O-Ring is just perfect.
Another solution was posted in a German forum, by adding an additional 8x2 O-Ring to the mouthpiece (where the other one is already). Haven't tried it out yet, but worked for others.
Next time you make a new coil, you simply have to scroll the O-Ring down a few millimeters onto the base, make the coil, screw it in and scroll the extra O-Ring back up.
The problem comes from the non-resistant wire under the nut, which creates a tiny space.
I have no idea why it is so, in Short Mode it didn't matter at all, but in Big Mode it does (maybe the pressure of the extra liquid?)
Another, additional solution is shown here:
Odysseus-Selbstwickler
(post #860 on the bottom of the page)
Try to place the non-resistant wire in the last round before the base, so no extra space will be created, when screwing on the nut.
But the additional O-Ring is just perfect.
Another solution was posted in a German forum, by adding an additional 8x2 O-Ring to the mouthpiece (where the other one is already). Haven't tried it out yet, but worked for others.
Last edited:
Good info.....making note for future reference because I'll probably need it.
this should work with a punched cartomiser too. like a standard cart tank, i got 5ml to vape off before i try
It does work, I'm using it now as a carto tank. Just put a drip tip on the end and your sorted
I have heard you can also use it with non punched cartos but I can't see how that would work
Last edited:
I just went to that forum and saw a awesome picture(sorry I have nothing to add but this picture is amazing)
Looks just like the one I'm currently holding.
It will be feeded from its side holes steve, like AVS used to feed atomizers. I am sure that you know many atomizer feeders in the market that work like AVS did in the past
Imeo you're saying that we don't have to punch a carto to use in Ody? I should get by expansion set tomorrow and that's one of the setups I want to try.
Has anyone found a good supplier of bulk wick? I've been able to find wire, but not having much luck finding good wick. I ordered a spool of the wick that was posted in the original iatty thread but I guess there is health issues with it? (I would assume because the wick is very fibrous and could be inhaled)
I LOOOOOVE the new ODY base!!! 
Thank you for making this Imeo, this completes it for me
Thank you for making this Imeo, this completes it for me
I have one question... The ceramic assembly sits deeper in the tank now which allows for greater juice capacity. But that also means that the mouthpiece is lower too. Do we need to pay attention to how much we unscrew the mouthpiece now? Is there a possibility of it completely unscrewing from the ceramic assembly?
Thanks.
Thanks.
- Status
