Odysseus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo madvapes provari revolution
- Status
Thats why they shouldn't let women drive a Mercedes - don't have there priorities straight between a car and a donut. On another note - run to Home Depot tomorrow and get a post and a mailbox and get it up straight-away
Well you can do as Dspin says and go get a replacement mailbox tomorrow or you can call the post office first thing monday and ask them to hold your mail till you get one up or ask them to leave it on your doorstep.
Yea, +1000!!!
I don't really have much to talk about anymore... that's unless people want to see me make a post after post after post saying "I freaking LOVE my ODY!!!"
Seriously, what else is there to say? This is as good as it gets, period.
Yea, +1000!!!
I don't really have much to talk about anymore... that's unless people want to see me make a post after post after post saying "I freaking LOVE my ODY!!!"
Seriously, what else is there to say? This is as good as it gets, period.
Hey V. You can start trying to figure out what Imeo will do to out do himself next. You know he will
I still believe it is going to be an addon for ody based on the Acme Hole technolody. It will be dripping mode sized but hold up to 15ml of juice for us heavy vapers
The new GGTS ODY base is simply amazing, what a difference. No more crap adapters. Straight power to the Ody on the GGTS. I want something similar for the iAtty. ;-)
I will say this. Adapters are for most part crap . However the 901-510 that Bruce sells is very good for Iatty and Odyss . Not alladapters. are created. equal
dspin, I think everything Bruce sells is great. I suspect it all starts from the fact that he will only sell something that he would actually use too. I've come to really appreciate Bruce for his integrity and we should mention this more often here. Not many vendors are like him.
PS Bruce just send the checks to my usual address
PS Bruce just send the checks to my usual address
It may be that your coil is gunked up and you either need to change it or dry burn. I find that with my juice I need to dry burn every time I fill in big mode or every 2-3 fills in short mode.
This is an excellent solution Imeo, but I do not give enough liquid in the coil. I tried three times and I have not got enough liquid. I do the setup number 12. Maybe I exaggerated the customer liquid
Can't draw vapor unless you CLOSE the juice control? that doesn't make sense to me
Aside from that though, yeah, I find they're good for about 2 days as well.
Big mode lasts SO FRIGGIN LONG. I've had a lot of tanks in my time, but holy moly... this thing holds a LOT O JUICE
I've got the Ody GGTS base, and a brand spaking new control tank and brass connector that just arrived yesterday - dying to try them out, but when they arrived I thought nah, I don't want to waste any juice, and you invariably lose a little when you pour some back into the bottle from the tank... so I'll just wait and make the switch when I run out of juice and its time to refill or rebuild... and this thing is still like half full from filling it 2 nights ago. crazy. its killing me! haha
Aside from that though, yeah, I find they're good for about 2 days as well.
Big mode lasts SO FRIGGIN LONG. I've had a lot of tanks in my time, but holy moly... this thing holds a LOT O JUICE
I've got the Ody GGTS base, and a brand spaking new control tank and brass connector that just arrived yesterday - dying to try them out, but when they arrived I thought nah, I don't want to waste any juice, and you invariably lose a little when you pour some back into the bottle from the tank... so I'll just wait and make the switch when I run out of juice and its time to refill or rebuild... and this thing is still like half full from filling it 2 nights ago. crazy. its killing me! haha
I didnt had problem with leakage but want to try this setup so I did it.
I use 34awg nichrome wire for the resistance and NR on only one side. I did the coil with three loops and cover the rest with the ss mesh, put on the Ody base and test the resistance, 1.6 ohms. Put the big mode and refill, no leakage not even a drop.
Great flavor huge vapor at 3.7, the Ody vaping heaven is getting better.
Imeo thanks for the tip, another HR for you!!!
Wow bp, or you dont vape enough or I vape so much, I refilled last night around 11:45pm watching HBO Boxing and today around 3:30pm it was empty. Maybe I need to raise the nic level, doing 10mg lately. But I love to vape so much that I dont to stop.
Wow bp, or you dont vape enough or I vape so much, I refilled last night around 11:45pm watching HBO Boxing and today around 3:30pm it was empty. Maybe I need to raise the nic level, doing 10mg lately. But I love to vape so much that I dont to stop.
I am in the same boat. Vaping 12 mg and going through about 10-11ml a day so I have to fill a couple times a day (not using all juice form second fill.)
I dont have a problem with the quantity of liquid stefano. Ody is feeded exellent because of its liquid control but SS mesh is not a very good idea because of the material. It gives more resistance to the setup. We just need another material. But if you dont want to put mesh inside Ody then use the trick I said about the wire inside the base of Ody
This is an excellent solution Imeo, but I do not give enough liquid in the coil. I tried three times and I have not got enough liquid. I do the setup number 12. Maybe I exaggerated the customer liquid
Thanks Nandy
My setup with mesh gave me bigger resistance than what I wanted to make. Maybe I didnt do it in the right way. I will try it again
My setup with mesh gave me bigger resistance than what I wanted to make. Maybe I didnt do it in the right way. I will try it again
I didnt had problem with leakage but want to try this setup so I did it.
I use 34awg nichrome wire for the resistance and NR on only one side. I did the coil with three loops and cover the rest with the ss mesh, put on the Ody base and test the resistance, 1.6 ohms. Put the big mode and refill, no leakage not even a drop.
Great flavor huge vapor at 3.7, the Ody vaping heaven is getting better.
Imeo thanks for the tip, another HR for you!!!
Nandy, you were right. No power loss with mesh. My mistake was that I made a thin tube of mesh around wick and it couldnt be pushed from the ring and the internal threads of the base in the right way. So I made a fatter mesh tube around wick and it works exellent. Resistance remains the same.
To archive this result, I made close wraps of the resistance wire around the length of the wick that will be covered by the mesh, so the contact between mesh and those close wraps were the right one
To archive this result, I made close wraps of the resistance wire around the length of the wick that will be covered by the mesh, so the contact between mesh and those close wraps were the right one
Last edited:
- Status
