Odysseus official

[fright88]

Thanks for all the o-ring links! I'm also confused about sizing, especially for the smallest one for the center pin. The wiki appears to show them by ID and thickness, with the smallest being 1.78x1.78 (actually the thickest), but I'm not clear which one would work from oringsUSA. Their sizing diagram isn't terribly clear to me. Which size should I get for the 1.78x1.78? Sorry if I'm being obtuse.

This may confuse you more so if it does I apologize but once I figured out how they have it arranged I really like the site. First thing to note is they always only list 2 measurements hole size and cross section. Second thing to remember is they have all their cross sections clumped up together. Use this link since it deals with them in Metric which is what Imeo always states sizes as oringsUSA
As for their arrangement it starts with cross section sizes so first they have their 1mm cross sections listed so it would be something like this.
1.5x1
2x1
2.5x1
3x1
ect ect
Then once all the 1mm cross sections are listed it lists the next size of cross section so next would be
.8x1.1
ect
then the next size and so on. So when I am trying to find an o-ring I scroll till I find the correct cross section then I look for the hole diameter.

Hope this helps a little.

 

[Mozzer]

This may confuse you more so if it does I apologize but once I figured out how they have it arranged I really like the site. First thing to note is they always only list 2 measurements hole size and cross section. Second thing to remember is they have all their cross sections clumped up together. Use this link since it deals with them in Metric which is what Imeo always states sizes as oringsUSA
As for their arrangement it starts with cross section sizes so first they have their 1mm cross sections listed so it would be something like this.
1.5x1
2x1
2.5x1
3x1
ect ect
Then once all the 1mm cross sections are listed it lists the next size of cross section so next would be
.8x1.1
ect
then the next size and so on. So when I am trying to find an o-ring I scroll till I find the correct cross section then I look for the hole diameter.

Hope this helps a little.

This was a massive help. Thank you! and thanks anavidfan for the kind offer. I will just order them. That way I have an ongoing source.

 

[fright88]

Glad to help. I order all my O-rings from there and the first time I did it took me forever to figure it out.

 

[anavidfan]

This was a massive help. Thank you! and thanks anavidfan for the kind offer. I will just order them. That way I have an ongoing source.

Let me know, I had a small package ready, sitting on my counter ready to send at the drop of a hat.......

 

[<---cop]

Ithaka caps works much better, thats why I made them fright, you are right. But some friends like older technology for some reason. Its ok, I can do that for them

Ithaka caps are more expensive and easier to build them on Ody but I see that you always prefere unique pieces. Ok, I will start making those pieces via preorders only

Please.

Obvious begging post for the Ody top cap fans.

 

[anavidfan]

I just saw the list of things Imeo will be producing soon, I wish Imeo would make some of the extensions for full mode Ody the SS extensions both in SS

Plus, maybe I missed it but V2 center pins, not the plated V1 and the little Ody dripper locking ring
On the Penelope list, not being completely familiar with all the names of the parts, will there be all the parts needed for a whole rebuildable unit? I need a spare a long with the base

Oh lets not forget the little black plastic spacers..... Sorry, Im just trying to think of important pieces .
The extensions are my favorite parts now. I rarely use the standard steel tank. The extensions would be wonderful for Ithaka too.......

Plus I hope that the preorder is after Christmas so everyone can afford it. Or at least people like me that dont have money to spare on myself this time of year, I just dont want to miss out, this might be the last chance for us "old school" GG lovers.

 

[imeothanasis]

I will only make V2 pins, no worries ana

I will not make a whole rebuildable part for Penelope

small plastics are all the same for Ody-Penelope-Ithaka and they are in stock already

Extensions for Ithaka are in stock and they fit on Ody too

There will be no preorder but pieces will be ready after Christmas as you said

 

[anavidfan]

Thank you for the update , Imeo, but are the parts to make a rebuild able unit be available, like I said Im not well versed in the names of the parts, I was wondering it the individual parts such as the ceramic holder, center pins, nuts etc.

 

[imeothanasis]

the only that I will not make regarding the rebuildable part, is the ceramic housing of penelope ana. These housings are time eaters for cnc machines and I have so little time in my hands.

 

[anavidfan]

Thats too bad,

 

[legion13]

does anyone know where i can get or have a extra center pin and nut for the ody v2 they can spare(e-smoke guru and COV are out). its not for me, my cousin striped his out somehow and needs a replacement. i never even thought to order spares for the oddy other than the ceramics and washers. my cousin uses me for his gg spare parts and is not a member of ecf.

he owns a vape shop, you would think he would take some time to be active in the community that he makes a living in so he could ask these things himself

i know parts are in short supply but i thought i would take a shot in the dark.

oh ... one more thing...ODY BUMP!

 

[Aal_]

Imeo is making new ones and you should be covered by warranty.

 

[legion13]

great news! i was under the impression that the spare parts were on hold. i don't see how user error would be covered under warranty though.?

 

[anavidfan]

Imeo is making new ones and you should be covered by warranty.

Really? I just had the first center pin break on me last week, it would be nice to get another.

That was my only backup, Im sorry I cant come to the rescue. I had just sent one off to someone else.


Sent from my iPhone using Tapatalk

 

[Aal_]

As far as i know you have lifetime warranty as long as imeo makes the parts. And he said he is going to make ody pins no?

 

[anavidfan]

He sure did, after the holidays, was the last news.


Sent from my iPhone using Tapatalk

 

[Mozzer]

As far as i know you have lifetime warranty as long as imeo makes the parts. And he said he is going to make ody pins no?

I don't suppose the warranty would be valid for an Odysseus acquired 2nd hand? Is it the life of the atty or the owner?

 

[fright88]

I don't suppose the warranty would be valid for an Odysseus acquired 2nd hand? Is it the life of the atty or the owner?

Lifetime of the device.

 

[Aal_]

lifetime of the atty. It is really good to know that not a lot of people know this. This means failure rate is really low

I don't suppose the warranty would be valid for an Odysseus acquired 2nd hand? Is it the life of the atty or the owner?

 

[legion13]

i would personally have a hard time asking for warranty replacement when it was clearly user error. he told me he over tightened the nut and stripped it.