Odysseus official

[Serpent67]

Mr. Postman brought me a dream.

I let you know my thoughts on big mode after I finish off a tank full.

It will be about 4 days or so.................

 

[Vaporologist]

I guess the only way to find out is to try it Then post your findings

I'm a believer in finding things the easy way

 

[Poppa D]

well i got the expansion set and the new base!!!! its only threaded on one end!!!! bummer

PM Imeo and your vendor for assistance.

 

[silentt]

I should get all my stuff today, I can't wait!

 

[Poppa D]

I'm a believer in finding things the easy way

I'm interested in your findings since I'm away from home, give it a go, and post.

 

[Cacique500]

Got my stuff today and put it in big mode 510 on a GGTS. Getting a small airflow through it when the air CR is closed (and the juice control is closed as well)...normal or did I miss something somewhere?

Also, when screwing in the small piece with o-ring into the mouthpiece, I had to take it back out due to the o-ring shifting...a very small ring of metal came out of the mouthpiece. Extra piece from fabrication or something necessary?

Thanks in advance!

 

[silentt]

"out for delivery"!!

Today is a good day.

 

[loft]

My expansion kit just arrived, and I was super excited at first but being sick I just put it on my desk, took a picture, and left it there. Too tired to fiddle around with it.

 

[fright88]

I too should be recieving mine today. I already have a new coil made for rebuild.

 

[Zoranth]

What is only threaded on one end and can you take a picture and post it please?

well i got the expansion set and the new base!!!! its only threaded on one end!!!! bummer

 

[fryfour]

its the new gg base for ggts . not sure if you can see in the pic

 

[R.D.Sponge]

Got my stuff today and put it in big mode 510 on a GGTS. Getting a small airflow through it when the air CR is closed (and the juice control is closed as well)...normal or did I miss something somewhere?

Also, when screwing in the small piece with o-ring into the mouthpiece, I had to take it back out due to the o-ring shifting...a very small ring of metal came out of the mouthpiece. Extra piece from fabrication or something necessary?

Thanks in advance!

If you have to put effort to get this airflow, with CR closed, it's normal.

There are no very small metal parts in Odysseus. If you have two metal rings with your new kit (one like that we use to secure the ceramic container to the base and one smaller) then it's from fabrication.

Generally, the instructions are to clean the parts with an tooth brash, water and soap, before the first use (especially the threads), but sometimes you can't wait any longer, you have to start right away...

 

[Zoranth]

fryfour,

Yes, that is a manufacturing error. I would advise contacting Bruce immediately for a replacement.

-Zor

View attachment 76150its the new gg base for ggts . not sure if you can see in the pic

 

[Cacique500]

Thanks Sponge. It's different than the UFS/GGTS...you close the air and you get NOTHING...this one I'm getting a little air...no biggie. I figured the metal was extra (no threads that I could see)...but just wanted to check to be sure...

 

[Vaporologist]

I'm interested in your findings since I'm away from home, give it a go, and post.

All right, I emptied the tank and tried it... Yes, the mouthpiece does unscrew from the ceramic housing.

However, I don't see it being a problem for anyone. I got 16 half-turns or 8 full turns before it detached. And because the bottom of the mouthpiece is sitting higher now on the ceramic housing in the closed position, you will find yourself not opening it as much as you did before.

Using nextel, I used to have the juice control open all the way with the 510 ODY base. I think it was about 12 half-turns. Now with the new base I find myself not going past 6-7 half-turns otherwise it starts flooding a little. So I don't think I will ever find myself unscrewing it too much where it would unscrew all the way.

 

[Rick.45cal]

View attachment 76150its the new gg base for ggts . not sure if you can see in the pic

Whoops, looks like the threads didn't get cut on the bottom. Bruce will fix ya up right!

 

[Rick.45cal]

All right, I emptied the tank and tried it... Yes, the mouthpiece does unscrew from the ceramic housing.

However, I don't see it being a problem for anyone. I got 16 half-turns or 8 full turns before it detached. And because the bottom of the mouthpiece is sitting higher now on the ceramic housing in the closed position, you will find yourself not opening it as much as you did before.

Using nextel, I used to have the juice control open all the way with the 510 ODY base. I think it was about 12 half-turns. Now with the new base I find myself not going past 6-7 half-turns otherwise it starts flooding a little. So I don't think I will ever find myself unscrewing it too much where it would unscrew all the way.

My experience is the same as your! I barely have to open mine anymore, maybe 2 turns at the most. Should make the bottom of the tank disappear just as well as the when the tank is full Anyone worried about it unscrewing completely could slide an appropriately sized Oring over the mouthpiece, Might take a couple to make up the difference in space, but should prevent that from happening. I will give this a shot when my tank is empty, tomorrow

This thing vapes WAY better without the crappy 901-510 connector! Feeds much better with the substantial amount of liquid above the coil too Big mode is AWESOME!

 

[Vaporologist]

My experience is the same as your! I barely have to open mine anymore, maybe 2 turns at the most. Should make the bottom of the tank disappear just as well as the when the tank is full Anyone worried about it unscrewing completely could slide an appropriately sized Oring over the mouthpiece, Might take a couple to make up the difference in space, but should prevent that from happening. I will give this a shot when my tank is empty, tomorrow

This thing vapes WAY better without the crappy 901-510 connector! Feeds much better with the substantial amount of liquid above the coil too Big mode is AWESOME!

Yep, that was the first thing I noticed, too! I had no idea how much I disliked using adapters until today. And it seems more responsive as well.

 

[Rick.45cal]

Surprisingly so! Amazing how one crappy little Chinese part can actually warp the whole experience. Just goes to show the difference between a well thought out tool, and one that is made purely with profit in mind

Reminds me why I buy GG's and artisan made tools! Long live Imeo!!! Long live GG!!! Long live the master's of their crafts!!!

 

[Poppa D]

You could stack some o rings on the top of the mouthpiece neck to stop it from going so far.

All right, I emptied the tank and tried it... Yes, the mouthpiece does unscrew from the ceramic housing.

However, I don't see it being a problem for anyone. I got 16 half-turns or 8 full turns before it detached. And because the bottom of the mouthpiece is sitting higher now on the ceramic housing in the closed position, you will find yourself not opening it as much as you did before.

Using nextel, I used to have the juice control open all the way with the 510 ODY base. I think it was about 12 half-turns. Now with the new base I find myself not going past 6-7 half-turns otherwise it starts flooding a little. So I don't think I will ever find myself unscrewing it too much where it would unscrew all the way.