Odysseus official

[martinc]

It's easy to figure out why the Ody in big mode is lasting you so long Serpent. This is the reason, so please follow along with me class.

When you had the Ody in short mode, you had it glued to your lips huffing and puffing saying things like, "Doh, it's going to take how much longer?" and "Aw come on Ody, get here already"!

Now that you have Ody in all it's glory, you've got it held out in front of you admiring it all the time. Therefore you are vaping and stressing less and admiring more.

See, I told you the explanation was easy.

I fully endorse that answer.

 

[Landlord]

It's easy to figure out why the Ody in big mode is lasting you so long Serpent. This is the reason, so please follow along with me class.

When you had the Ody in short mode, you had it glued to your lips huffing and puffing saying things like, "Doh, it's going to take how much longer?" and "Aw come on Ody, get here already"!

Now that you have Ody in all it's glory, you've got it held out in front of you admiring it all the time. Therefore you are vaping and stressing less and admiring more.

See, I told you the explanation was easy.

Oh yea gotta give a +100000000 on that one!

 

[Zoranth]

Sorry folks, but it all takes time. I also had to take the time to figure out where everything went . So, while I am working on these without using them, you folks enjoy what you have working so far and I will get the illustrations out soon

I have just now finished creating the 3D Models of each part. I now have to create each specific Assembly then from there, create the exploded assembly drawings.

hopefully the GG wiki gets updated with the blow-up assembly illustrations of all the new modes, like the ones already there, each part labeled....and a kit listing, showing where all the parts are used... I know it took me a few minutes to segregate everything and try out the different modes, but there are going to be some that will have a hard time with it trying to get them all figured out.... hell, I was questioning what that teeny weeny o-ring was used for as I didn't see it used in the vids...now I know

 

[k3v1n]

We all appreciate your hard work Zoranth.

Your illustrations are invaluable to us all.

 

[TrueOgre]

my odysseus with atomizer Cisco Lr 1,5 ohms.

imeo, would serve me a video, to understand the correct use of the whole other pieces of the upgrade

in the configuration used in the photo, it goes from god

sorry for my english

 

[Rick.45cal]

Sorry folks, but it all takes time. I also had to take the time to figure out where everything went . So, while I am working on these without using them, you folks enjoy what you have working so far and I will get the illustrations out soon

I have just now finished creating the 3D Models of each part. I now have to create each specific Assembly then from there, create the exploded assembly drawings.

BACK TO YOUR DRAWINGS!!!

 

[Repent]

Sorry folks, but it all takes time. I also had to take the time to figure out where everything went . So, while I am working on these without using them, you folks enjoy what you have working so far and I will get the illustrations out soon

I have just now finished creating the 3D Models of each part. I now have to create each specific Assembly then from there, create the exploded assembly drawings.

You are the man, Zor.

 

[Serpent67]

View attachment 76461


my odysseus with atomizer Cisco Lr 1,5 ohms.

imeo, would serve me a video, to understand the correct use of the whole other pieces of the upgrade


in the configuration used in the photo, it goes from god

sorry for my english View attachment 76462

There are a full series of videos Ogre.

The thread for the videos is posted in the stickies.

 

[silentt]

note 15b,

Odysseus - E-Cigarette Wiki

Do I need this o-ring when I'm using my ody in 510 atty/carto mode?

 

[Zoranth]

Silent,

You only need an oring between the Center pin and the Base to prevent the two from shorting out. The Plastic Insulator between the center pin and the metal piece the atomizer screws into acts as an insulator for that part.

Do I need this o-ring when I'm using my ody in 510 atty/carto mode?

 

[silentt]

Cool thanks a lot Zor!

I thought I had it all put together right but just wanted to make sure.

 

[silentt]

well that failed. I put it together in big mode with a dual coil cartomizer and it leaked so damn much lol

 

[Zoranth]

Ouch Lol,

Take a picture showing all the parts you used and where if you could

well that failed. I put it together in big mode with a dual coil cartomizer and it leaked so damn much lol

 

[imeothanasis]

tiny o-ring is the same as the tiny o-ring between ceramic housing and center pin and it goes on the small channel at the end of the center pin but ONLY on UFS mode fright

Ok I re-watched all the videos but I can't for the life of me figgure out what the tiny o-ring is for any ideas I will list what I know for reference.

2 o-rings on the clear window
1 o-ring around the dripping mode base
1 o-ring is for when using e2 cartos to cover the holes
1 o-ring in the 510 atomizer mouthpiece (this one had be bumfuzzled for a while kept wondering what the small threaded ring was lol)

The final o-ring is smaller then everything else. Thanks for any help

 

[fright88]

Ok so one more question about o-rings. Watched the Haze Hour today and he had an o-ring in the dripping mode base and actually one in the regular base as well. My question is were these o-rings supposed to come with it?

 

[Zoranth]

Well that sucked, I just took one of my Ceramics out of the holder for the first time since I got the Oddy and it is broken in half around the axis just above the ceramic nut. Guess I should have checked that one before I started using it Lol.

 

[harekira]

@Zoranth: You can glue it together with ceramic cement (if it is a "clean break") - worked with mine for 3 weeks. I got my exchange ceramics a couple of days ago (one broke while screwing it in, the other 2 were ok).

 

[Zoranth]

Not so sure I want to put any kind of glue or cement on something that I am going to be inhaling through while it is being heated.

Thanks for the suggestion though.

 

[Zoranth]

Imeo,

I love the new GGTS -> Odysseus base. However, there is one small issue I am having. It does not seem to be pulling any excess liquid out of the collector tank.

Anyone else have this problem or is it that I have something put together wrong?

-Zor

 

[silentt]

are you talking about liquid that has dripped/leaked into the collection tank being pulled back into the odysseus?


edit: And I will take a picture of what I did with my dual coil cartos in the ody tomorrow. It leaked and I got frustrated so I disassembled it and cleaned everything and put it away for the night. I goto sleep early during the week. Works drains me and the sleeping pills knock me out