Odysseus official

[Killjoy1]

If you already have Ody, you already have the rebuildable part. Here's the rest and they're all currently in stock:

http://www.cloudsofvapor.com/store/...1102-odysseus-mouthpiece-cone-short-mode.html
Odysseus Small Base - Drip Mode
Odysseus Upper Connection Nut - Drip Mode

And the UFS upper body piece (assuming your UFS is V2)
UFS Upper Body v2

 

[Oddy]

ufs mode is standard mouth piece from short mode oddy on drip mode base


like this from esmokeguru

Rebuildable Odysseus for UFS | ODYSSEUS | GG Accessories | Esmoke Guru

 

[darco]

If you already have Ody, you already have the rebuildable part. Here's the rest and they're all currently in stock:

Odysseus Mouthpiece Cone - Drip Mode
Odysseus Small Base - Drip Mode
Odysseus Upper Connection Nut - Drip Mode

And the UFS upper body piece (assuming your UFS is V2)
UFS Upper Body v2

If I already had an oddy I would be a happier man could you also point out the rebuildable parts please? This seems to be the closest I can get to having an oddy!

 

[darco]

Does the dripping base allow bottom feeding? Cuz from what I figure, the UFS feeds juice from the bottom connector air holes.

 

[ukeman]

You need the following additional items to go from drip mode to short mode Ody (tank):

New Odysseus Base-GGTS

Odysseus Tank - Short Mode

Odysseus Small Cap Mouthpiece Nut

Odysseus Mouthpiece Cone - Short Mode

Odysseus Cap

Only the New Base, and the Mouthpiece cone for short mode are in... of these right now. (to turn Dripping Mode Ody to Short Mode Ody)

 

[darco]

Only the New Base, and the Mouthpiece cone for short mode are in... of these right now. (to turn Dripping Mode Ody to Short Mode Ody)

I am looking at using it in my UFS so I am guessing I don't need the tank... And what about the ceramic part? Damn now I am confused! really want an oddy in my UFS, so please help

 

[rwechsler]

Ok, here's what you do...

Build your Ody coil and install it into the dripping mode base. Then for a mouthpiece, use your short mode mouthpiece. Next, take your UFS and assemble the juice control ring, collector cup, air control ring, and base (everything but the tank rings and the top cap). Next, install the dripping mode ody base with coil assembly and short mode mouthpiece into the 510 connector on the UFS like you would with any other atomizer. Next, using 2 UFS extension rings and the normal clear or ss window, put a tank on the juice control. Make sure mouthpiece is closed, air control is closed, and juice control is fully closed. Fill tank with delicious juice. Put on top cap with UFSv2 top cap seal ring (what you'd use to run UFS with a drip tip instead of a mouthpiece) and screw it firmly on (VASELINE!!!!!!!!!). Release air control, take drag to make sure it's not flooded, then you can start using the normal UFS juice control (which if you intend to do, make sure that your wicks extend all the way down to the o-ring when you still your coil, important if you want it to wick properly). If you want, you can use the ody mouthpiece for juice control, which I actually prefer. Either way, that's all you gotta do!

 

[urquidezj]

so maybe this had been asked before, which one performs better? short mode ody or drip ody?

 

[darco]

Ok, here's what you do...

Build your Ody coil and install it into the dripping mode base. Then for a mouthpiece, use your short mode mouthpiece. Next, take your UFS and assemble the juice control ring, collector cup, air control ring, and base (everything but the tank rings and the top cap). Next, install the dripping mode ody base with coil assembly and short mode mouthpiece into the 510 connector on the UFS like you would with any other atomizer. Next, using 2 UFS extension rings and the normal clear or ss window, put a tank on the juice control. Make sure mouthpiece is closed, air control is closed, and juice control is fully closed. Fill tank with delicious juice. Put on top cap with UFSv2 top cap seal ring (what you'd use to run UFS with a drip tip instead of a mouthpiece) and screw it firmly on (VASELINE!!!!!!!!!). Release air control, take drag to make sure it's not flooded, then you can start using the normal UFS juice control (which if you intend to do, make sure that your wicks extend all the way down to the o-ring when you still your coil, important if you want it to wick properly). If you want, you can use the ody mouthpiece for juice control, which I actually prefer. Either way, that's all you gotta do!

Wow! Thanks for the detailed rundown, will save your post for reference but right now I am trying to figure out if I can buy the necessary parts to make an oddy for my UFS. I dont have any oddy parts just have 2 UFSes, one v1 and the other a v2. So need to know the list of parts to get. Thanks for all the help people

 

[Killjoy1]

ufs mode is standard mouth piece from short mode oddy on drip mode base

D'oh! I thought something didn't sound right I'll edit my post to prevent confusion

 

[fright88]

so maybe this had been asked before, which one performs better? short mode ody or drip ody?

Depends on you, and your juice. Dripping mode works great but you have to drip. Short mode you don't have to drip but you may have to play with juice controll a bit for constant feed.

 

[Major]

Agreed brother Fright! I know for me, the regular feed of the short mode is preferable. My lack of dexterity makes dripping a messy proposition for me. Well that and the few times I made a concerted effort to learn to do it properly yielded too many scalding droplets of flying juice back into my mouth made me realize dripping wasn't my thing.

 

[georgie_concept]

"yielded too many scalding droplets of flying juice back into my mouth"

made me nearly spit my sip of coke right onto the screen at work!

Thank you mucho major (tummypain)

 

[ukeman]

I'm not in the mix here; I just ordered a Dripping Ody... will look to get parts for the Short Mode eventually, but this post is all Greek to me....heheheh just saying. I'm sure it will make sense if I keep following through.

Ok, here's what you do...

Build your Ody coil and install it into the dripping mode base. Then for a mouthpiece, use your short mode mouthpiece. Next, take your UFS and assemble the juice control ring, collector cup, air control ring, and base (everything but the tank rings and the top cap). Next, install the dripping mode ody base with coil assembly and short mode mouthpiece into the 510 connector on the UFS like you would with any other atomizer. Next, using 2 UFS extension rings and the normal clear or ss window, put a tank on the juice control. Make sure mouthpiece is closed, air control is closed, and juice control is fully closed. Fill tank with delicious juice. Put on top cap with UFSv2 top cap seal ring (what you'd use to run UFS with a drip tip instead of a mouthpiece) and screw it firmly on (VASELINE!!!!!!!!!). Release air control, take drag to make sure it's not flooded, then you can start using the normal UFS juice control (which if you intend to do, make sure that your wicks extend all the way down to the o-ring when you still your coil, important if you want it to wick properly). If you want, you can use the ody mouthpiece for juice control, which I actually prefer. Either way, that's all you gotta do!

 

[JC-Steamer]

ukeman - you'll see it really makes sense when you got the beauty! ;D
If not - let us know, we are here to help out dude, no doubt.

 

[ukeman]

that's great pal,
I have a feeling I'll be looking at the Wiki blueprint for a while, soon enough. You guys are the best.

ukeman - you'll see it really makes sense when you got the beauty! ;D
If not - let us know, we are here to help out dude, no doubt.

 

[dspin]

I'm not in the mix here; I just ordered a Dripping Ody... will look to get parts for the Short Mode eventually, but this post is all Greek to me....heheheh just saying. I'm sure it will make sense if I keep following through.

Drip Mode is excellent, but then again the Short mode is too. Both are just awesome indeed

 

[imeothanasis]

I just tried Mr krincle's method. I only put a piece of wick on the top of the ceramic. No wick via ceramic's slots. It works! I dont know how but it works. Maybe Ody is a magic atomizer lol

I vape it 10 hours now and it works like normal.

 

[MrKrinkle]

Thank You Imeo... I'm glad you gave it a shot... its a great way to save wick material also... and yes ODY is very magical...

I just tried Mr krincle's method. I only put a piece of wick on the top of the ceramic. No wick via ceramic's slots. It works! I dont know how but it works. Maybe Ody is a magic atomizer lol

I vape it 10 hours now and it works like normal.

 

[sodapopinski]

maybe the pressure in the tank pushes the liquid up the channels