**official canvape thread** - Part 2

Status
Not open for further replies.

martinc

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2011
4,584
2,068
59
Montreal,Quebec,Canada
Sigh...so many decisions to make.... Pull the trigger on a vmax and all the accessories or try out this iTaste thingy...

I think I might wait on a couple more reviews on the iTaste. I'm pretty content with my twist to use during the day (which the iTaste would replace) but it would be pretty sexy to have a vmax for my home vaping...

Frankly,I`d go Vmax 1st...cant go wrong,specially not at today`s price.

No siree.
 

fuzzione

Ultra Member
ECF Veteran
Apr 11, 2012
1,049
1,438
GTA Ontario
iTaste in da house. Thanks Adam for your above and beyond customer service in meeting with me today when I happened by your neck of the woods. I do realize how busy this day must have been for you.

I can now confess that I slept in your back yard last night but it was indeed worth it. I am the 1st to have a Canvape iTaste in hand! Hooooya. Haven't even fired it up yet but it is just the coolest looking thing. At an amazing price.

P.S. pick up your dog poo!
 

northofamerica

Super Member
ECF Veteran
Verified Member
Feb 5, 2012
452
207
Saskatoon
iTaste in da house. Thanks Adam for your above and beyond customer service in meeting with me today when I happened by your neck of the woods. I do realize how busy this day must have been for you.

I can now confess that I slept in your back yard last night but it was indeed worth it. I am the 1st to have a Canvape iTaste in hand! Hooooya. Haven't even fired it up yet but it is just the coolest looking thing. At an amazing price.

P.S. pick up your dog poo!

I couldn't dislike the post out of jealousy so I'm posting my dislike here lol


Also. Never trust other peoples opinions :) Sell yer body, buy everything.
 

mopar

Unregistered Supplier
ECF Veteran
May 15, 2011
2,116
1,758
47
Toronto
www.canvape.com
Another 4:15 sucked away from my life and gobbles up by youtube :facepalm:

5 pieces
All 5 are Clear!
Holds 1.5ml of fluid.
2.6-2.8ohm for best results.
Comes with filler syringe and soft drip tip.
Multi use and long lasting!
This is the same product as the pheonix.

I can't even decide what to vape on anymore :)
 

mopar

Unregistered Supplier
ECF Veteran
May 15, 2011
2,116
1,758
47
Toronto
www.canvape.com
Yea anyone holding out on VV really needs to add one of these guys joeytech eGo twist to their arsenal. LR is slowly becoming a thing of the past with so many affordable VV options.

P.S. The firebirds are total juice misers and give a good vape. They will leak a little out the bottom due to the pressure of filling them so take your time and you'll be good. Great vape me likey!
 

dillpickler

Full Member
Feb 10, 2012
9
1
canada
I hope this isn't an unreasonable place to post this, but i was wondering if i could get some help (though it may be too far gone). My L-rider from canvape seems to have gone belly-up. I'm getting flashing after trying to fire it once or twice and the voltage is reading as 2.8, then _.2, then 2.8...repeat...repeat.

This doesn't seem like a common problem. A firm googling has found 1 (ONE) person with a similar problem. Any ideas from the wonderful natives at ECF?

Edit: The battery's should be charged (unless the problem is either them or the charger).
 
Last edited:

dhdonline1

Super Member
ECF Veteran
May 7, 2012
410
178
canada
Yea anyone holding out on VV really needs to add one of these guys joeytech eGo twist to their arsenal. LR is slowly becoming a thing of the past with so many affordable VV options.

P.S. The firebirds are total juice misers and give a good vape. They will leak a little out the bottom due to the pressure of filling them so take your time and you'll be good. Great vape me likey!

I am VERY impressed with the twist! I kind of wish I got more coz I don't think I can go back to my regular egos!!

I've tried a lot of cartos/clearos. I keep going back to the stardust! Haven't tried the stone yet tho. I want to pick up some of the firebirds next order tho!! they look pretty slick too!
 

dhdonline1

Super Member
ECF Veteran
May 7, 2012
410
178
canada
I hope this isn't an unreasonable place to post this, but i was wondering if i could get some help (though it may be too far gone). My L-rider from canvape seems to have gone belly-up. I'm getting flashing after trying to fire it once or twice and the voltage is reading as 2.8, then _.2, then 2.8...repeat...repeat.

This doesn't seem like a common problem. A firm googling has found 1 (ONE) person with a similar problem. Any ideas from the wonderful natives at ECF?

Edit: The battery's should be charged (unless the problem is either them or the charger).

I've only had my lt for a little over a month, but I've never had a problem like that. When my batteries are dead the display just dims.

With my limited lt troubleshooting I do have a couple suggestions. If you have access to a multi-tester I would try testing your batteries off your charger. Mine come off my tr001 at 4.19 to 4.2 volts. If they are fully charged, I would try a different atty/carto. Maybe its possible you have a bad one that's shorted?

Beyond those things I can't think of anything else you could try...

Sorry I couldn't help more!! Maybe somebody else will be able to chime in and suggest something.
 

therealcmac

Vaping Master
ECF Veteran
Verified Member
Nov 6, 2011
3,012
1,708
47
Vancouver Island, BC Canada
www.youtube.com
I hope this isn't an unreasonable place to post this, but i was wondering if i could get some help (though it may be too far gone). My L-rider from canvape seems to have gone belly-up. I'm getting flashing after trying to fire it once or twice and the voltage is reading as 2.8, then _.2, then 2.8...repeat...repeat.

This doesn't seem like a common problem. A firm googling has found 1 (ONE) person with a similar problem. Any ideas from the wonderful natives at ECF?

Edit: The battery's should be charged (unless the problem is either them or the charger).

Hey Dillpickler, I love your name for one, and for two, try powering it off completely by holding the power button down until it turns off....then turn it back on. If it still does it email Tom support@canvape.com and let him know you are getting those crazy errors. You should be taken care of....sounds like a defective unit to me.
 

Mindfield

Vaping Master
ECF Veteran
Verified Member
Aug 28, 2010
5,029
2,631
53
Toronto, ON
iTaste in da house. Thanks Adam for your above and beyond customer service in meeting with me today when I happened by your neck of the woods. I do realize how busy this day must have been for you.

I can now confess that I slept in your back yard last night but it was indeed worth it. I am the 1st to have a Canvape iTaste in hand! Hooooya. Haven't even fired it up yet but it is just the coolest looking thing. At an amazing price.

P.S. pick up your dog poo!

I have to admit I've been very intrigued by the iTaste myself. Innokin is sending me a couple to check out, but since it's coming from China who knows when it'll get here -- but I'll definitely have my review of it. (It'll be a two parter, one for the standard kit, one for the clearo kit). Anyone know if DHL is usually fast? (I know they're crap, that's beside the point. :))

Don't worry, Adam, I'll be mentioning Canvape in the review since you're the only one in Canada who sells it. :)


Another 4:15 sucked away from my life and gobbles up by youtube :facepalm:

5 pieces
All 5 are Clear!
Holds 1.5ml of fluid.
2.6-2.8ohm for best results.
Comes with filler syringe and soft drip tip.
Multi use and long lasting!
This is the same product as the pheonix.

I can't even decide what to vape on anymore :)

Since that's the same as the Phoenix, then yes, this is a surprisingly good clearo. Good clean flavour and lots of it, good TH, great vapor. You just have to fill it properly: Insert syringe, turn upside-down, fill all the way up and then force a little bit of liquid through the wick so it saturates well. That's the only way I got it to wick at all. Once it was wicking though it was excellent.

Also, be careful when cleaning. The center post pulls right out to expose the coil and stubby little wick, but since the wick sits in little cutouts with matching cutouts at the wick-end of the center post, you have to be very careful when replacing the center post that the wick is completely within those cutouts when you press the center post back in place or else it's going to mangle the wick and it'll start leaking and/or not wicking properly. If possible, simply clean by injecting distilled water or alcohol through it, forcing it through the wick several times. (Final rinse should be with distilled water, repeated two or three times, if you used anything other than water in the earlier rinses.)
 
I've never ordered from Canvape but you guys all seem to love them so I thought I'd give them a try. A friend at work wanted a kit (she will be the second person I've converted to vaping!) and I needed a new Bloog PCC and their prices are the most inexpensive I have ever seen so I suggested we order from Canvape.

I placed an order late yesterday morning. Tom is so awesome - he emailed me to let me know that the Bloog PCC wouldn't charge the 510's in the kit I had also ordered and he just wanted to make sure I wasn't ordering the PCC in error. Talk about awesome customer service! Anyway, when I went home for lunch today, the order was there in the envelope. Unbelievable turnaround time - Canvape ROCKS!
 
Status
Not open for further replies.

Users who are viewing this thread