pdib LIBRARY: tech/specs/info
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
When the Greek comes by to chastise everyone else for breaking the "Do Not Post In This Thread" rule, you have issues.
The fact that the Greek broke the rule in order to inform you that you are breaking the rule is just a Tzatziki Ouroboros Paradox.
The fact that the Greek broke the rule in order to inform you that you are breaking the rule is just a Tzatziki Ouroboros Paradox.
Here's the changes you'll see in the V2 Nuppin':
No Lip. See discussion and description about that here: http://www.e-cigarette-forum.com/fo...hould-behave-yourselves-890.html#post15127936
Here's a pic:
This means that there's no "stop" for the topcap, other than the top of your mod! If you run this atty on a mod that doesn't catch the topcap (isn't wider than the atty), you could short out. USE THIS ATTY AT YOUR OWN RISK of shorting out on the cap.
Also, the machine shop has gone to great lengths to make the centerpost easily adjustable, yet not spin-out when capturing 24g wire at the positive post. I've checked it, and it works GREAT!
Lastly (that I can think of now): these atties were made here in the USA, by a machine shop who have shown excellence and precision in their machining (on these atties). It is my humble opinion that the precision and care, the tolerances, and the buttery smooth action of these atties is top-notch. Mind you, this is my impression as a consumer (my impressions as I opened the box, unpacked, inspected these atties and ran a bunch of them through their paces). You may find otherwise. You may want to wait until you hear some feedback from other customers. I can't claim that YOU'LL be happy with these atties. I can tell you that I, personally, am! The "finish" on these atties is a "machine finish". They have not been polished, tumbled, brushed, anything. They are "straight off the mill" for looks. They are also milled to a very, very fine spec: ~16 microinch milled surface spec. If you want a polished look, these are milled so fine/clean and smooth, that you can get that polish with 5 minutes and a hand rub with some polishing agent/compound.
No Lip. See discussion and description about that here: http://www.e-cigarette-forum.com/fo...hould-behave-yourselves-890.html#post15127936
Here's a pic:
This means that there's no "stop" for the topcap, other than the top of your mod! If you run this atty on a mod that doesn't catch the topcap (isn't wider than the atty), you could short out. USE THIS ATTY AT YOUR OWN RISK of shorting out on the cap.
Also, the machine shop has gone to great lengths to make the centerpost easily adjustable, yet not spin-out when capturing 24g wire at the positive post. I've checked it, and it works GREAT!
Lastly (that I can think of now): these atties were made here in the USA, by a machine shop who have shown excellence and precision in their machining (on these atties). It is my humble opinion that the precision and care, the tolerances, and the buttery smooth action of these atties is top-notch. Mind you, this is my impression as a consumer (my impressions as I opened the box, unpacked, inspected these atties and ran a bunch of them through their paces). You may find otherwise. You may want to wait until you hear some feedback from other customers. I can't claim that YOU'LL be happy with these atties. I can tell you that I, personally, am!
The "finish" on these atties is a "machine finish". They have not been polished, tumbled, brushed, anything. They are "straight off the mill" for looks. They are also milled to a very, very fine spec: ~16 microinch milled surface spec. If you want a polished look, these are milled so fine/clean and smooth, that you can get that polish with 5 minutes and a hand rub with some polishing agent/compound.
Last edited:
Here's some pics.
Copper cap (from last run), perfect fit with new parts. (V1 ↔ V2 compatability is confirmed)
Copper cap (from last run), perfect fit with new parts. (V1 ↔ V2 compatability is confirmed)
Thanks Peter, ordered several already and cannot wait to see them.
for anybody who wants to peruse a bunch of pics I've added 11 new pics of the V2 to my gallery
Here's a direct link to the Nuppin Gallery Nuppins
All of my pdib galleries can be seen here Pdib Galleries home Page - BigAperture
for anybody who wants to peruse a bunch of pics I've added 11 new pics of the V2 to my gallery
Here's a direct link to the Nuppin Gallery Nuppins
All of my pdib galleries can be seen here Pdib Galleries home Page - BigAperture
PRICING/ORDERING instructions:
Atties are available in Stainless Steel, Naval Brass and Black Anodized Aluminum. All base sections are SS. (Specifying a "Black Nuppin' " = Black Topcap & Black AFC. Same goes for Brass (cap & AFC). . . .. just like in the pics.) Each atty you order will come with 1 (tiny) hex key and 2 spare grub screws (in it's own section of paper tube . . . LOOK for it .. . don't throw it out with the packaging). The atties are very clean; but my sniff tests (open sealed atty baggie, insert nose, huff . .. . remove atty pull topcap, huff) did occasionally catch the slightest traces of machine oil. I'm gonna say, plan to give these atties a light wash/rinse before use; although it is most likely unnecessary.
SOLID POST:
I have ordered a few solid posts for those who might want to try this atty as a dripper. You can order a solid post (loose, not in the atty). These are in very limited quantity, so, please, only if you're really going to use it.
ANY NUPPIN' ATTY:
$84.95
AFC SLEEVES are available as follows:
$9.95 Black
$8.95 Naval Brass
$7.95 Copper (from previous run)
SOLID POST:
$11.00
SHIPPING:
$6 (default, USPS Priority Mail)
Please to order like this:
PM or email me. Tell me this:
Nuppin':
#Black
#Naval Brass
#SS
AFC:
#Black
#Naval Brass
#Copper
SOLID POST:
#
I NEED your PP addy (the email attached to your PP), I NEED a shipping address (or clear confirmation that the ship.addy listed at PP is THE ONE). All Packages will be sent with USPS PRIORITY MAIL without insurance. This means the carrier will probably leave the package if you're not home. (Priority is insured to $50. You may request additional insurance when ordering. Insurance requires a signature upon delivery.)
Priority mail is $6 in the US. I will ship overseas. Please inform me if this is an overseas (or Canadian) order, and we'll talk about shipping options.
So, you PM me, I invoice you (via PayPal), you pay, I ship, you vape.
Atties are available in Stainless Steel, Naval Brass and Black Anodized Aluminum. All base sections are SS. (Specifying a "Black Nuppin' " = Black Topcap & Black AFC. Same goes for Brass (cap & AFC). . . .. just like in the pics.) Each atty you order will come with 1 (tiny) hex key and 2 spare grub screws (in it's own section of paper tube . . . LOOK for it .. . don't throw it out with the packaging). The atties are very clean; but my sniff tests (open sealed atty baggie, insert nose, huff . .. . remove atty pull topcap, huff) did occasionally catch the slightest traces of machine oil. I'm gonna say, plan to give these atties a light wash/rinse before use; although it is most likely unnecessary.
SOLID POST:
I have ordered a few solid posts for those who might want to try this atty as a dripper. You can order a solid post (loose, not in the atty). These are in very limited quantity, so, please, only if you're really going to use it.
ANY NUPPIN' ATTY:
$84.95
AFC SLEEVES are available as follows:
$9.95 Black
$8.95 Naval Brass
$7.95 Copper (from previous run)
SOLID POST:
$11.00
SHIPPING:
$6 (default, USPS Priority Mail)
Please to order like this:
PM or email me. Tell me this:
Nuppin':
#Black
#Naval Brass
#SS
AFC:
#Black
#Naval Brass
#Copper
SOLID POST:
#
I NEED your PP addy (the email attached to your PP), I NEED a shipping address (or clear confirmation that the ship.addy listed at PP is THE ONE). All Packages will be sent with USPS PRIORITY MAIL without insurance. This means the carrier will probably leave the package if you're not home. (Priority is insured to $50. You may request additional insurance when ordering. Insurance requires a signature upon delivery.)
Priority mail is $6 in the US. I will ship overseas. Please inform me if this is an overseas (or Canadian) order, and we'll talk about shipping options.
So, you PM me, I invoice you (via PayPal), you pay, I ship, you vape.
Last edited:
I'm going to put a couple things here, so that it's easy to find in a few months.
These are links to posts from the previous sale regarding: easiest build video, more description, specifications for spare parts, yada yada.
PREVIOUS SALE, DESCRIPTION, COILING VID
PARTS SPECIFICATIONS AND WHERE TO GET
I will try to keep a small stock of hex keys, set screws (grub) and o-rings. PM if you need a few. I have ordered a few extra PEEK insulators as well. (have yet to confirm fit of insulator on V1 atty)
ADDIT: OH! when you're looking back at previous posts re: o-ring sizes, append this in your brain . . . . V2 atties were very specifically spec.ed and machined for 1x10mm on the atty base, and 1x11mm on the topcap/afc. You could still play with half sizes (like 1x11.5mm) for tighter or looser fit.
These are links to posts from the previous sale regarding: easiest build video, more description, specifications for spare parts, yada yada.
PREVIOUS SALE, DESCRIPTION, COILING VID
PARTS SPECIFICATIONS AND WHERE TO GET
I will try to keep a small stock of hex keys, set screws (grub) and o-rings. PM if you need a few. I have ordered a few extra PEEK insulators as well. (have yet to confirm fit of insulator on V1 atty)
ADDIT: OH! when you're looking back at previous posts re: o-ring sizes, append this in your brain . . . . V2 atties were very specifically spec.ed and machined for 1x10mm on the atty base, and 1x11mm on the topcap/afc. You could still play with half sizes (like 1x11.5mm) for tighter or looser fit.
Last edited:
You order black, you get all black.
You order Brass you get all brass.
You order Stainless you get all stainless.
You want a different color AFC you order separate/extra.
With the exception of the bases - All bases are stainless (but you already told us that)
You order Brass you get all brass.
You order Stainless you get all stainless.
You want a different color AFC you order separate/extra.
With the exception of the bases - All bases are stainless (but you already told us that)
Last edited:
Oh crap, I don't think I specified SS for mine. I requested a black AFC too that I forgot in the first PM. Pdib is gonna hate me for PMing him again, oh crap.You order black, you get all black.
You order Brass you get all brass.
You order Stainless you get all stainless.
You want a different color AFC you order separate.
With the exception of the bases - All bases are stainless (but you already told us that)
I'm just a little nutty. My first squonker (LP REO just showed up, looks incredible, SV) and I don't gave anything to rock on it yet, lol. I was in too much of a hurry, DOHHH
Edit: ok pdib, I sent correction number two *facepalm*
I promise, I got it all right and specified this time *double facepalm*
Last edited:
For Peter's sanity (maybe a lost cause) and to keep the library concise move all comments and chit chat to the other thread.
I'm guilty too, so this is directed to no one in particular, just a general reminder to myself and others.
I'm guilty too, so this is directed to no one in particular, just a general reminder to myself and others.
Sorry if I'm asking a dumb question here, but when I order a Naval Brass nuppin does it come with a Naval Brass AFC, or I have to explicitly order a Navel Brass AFC?
Comes as a set;
SS base, brass top and brass AFC. You would order another AFC if you wanted a different color, like a black AFC to go with your brass top, then you'd have one Nuppin with two AFCs
SS base, brass top and brass AFC. You would order another AFC if you wanted a different color, like a black AFC to go with your brass top, then you'd have one Nuppin with two AFCs
- Status
Similar threads
