PDIB's Making MODs!

[glassgal]

Ditto the above... I am most excited about this because of the 'one of a kind' aspect. A beautiful wood makes it that much more potential. And I fully plan for this to become my favorite fancy mod... my 'precious' that I'd want to tie a lanyard to and wear around my neck. As much as I love the Provari, I'm not wearing no dildo shaped anything around my neck

So I would really like a small low profile rba to go on top.

 

[lisancentraltx]

Good to see you, Kanj!!! I was just vaping with one of your toppers this AM =]

Well, I can access reosmods and the LP Reomizer 2.0, but it won't go into my cart since the 'Hide My ...' program won't allow cookies =] Regardless, I have enough BF toppers to get me through in a pinch if the Dibby is done much earlier than expected. I do intend to follow the artist's suggestion and wait a bit, think it over, and find something magnificent for the Dibby... I did notice that the Reomizer 2.0 was considered the best by many, so I know what I need to do from work once I've decided what to get =]

I've done a fair amount of building, from Protanks as the easiest to I suppose the Taifun, Fogger, AGA T2, and Kayfuns as being the moodiest =] Once I get the specs on and magnifying everything, I can pretty much get them done =] There is one that gave me some trouble... it's sitting in a holder being ignored LOL I don't even remember which one it was LOL

 

[SLIPPY_EEL]

Cant afford the mod ._.._.._.._.._.._.._.._.., just here to say how much i love your works (of art) Dibby

Same here! .... although i haven't the foggiest How much they are anyway how are we getting prices plse guys, i cant go through the whole thread

 

[lisancentraltx]

Same here! .... although i haven't the foggiest How much they are anyway how are we getting prices plse guys, i cant go through the whole thread

PM the OP

Ditto the above... I am most excited about this because of the 'one of a kind' aspect. A beautiful wood makes it that much more potential. And I fully plan for this to become my favorite fancy mod... my 'precious' that I'd want to tie a lanyard to and wear around my neck. As much as I love the Provari, I'm not wearing no dildo shaped anything around my neck

So I would really like a small low profile rba to go on top.

Well said! I understand COMPLETELY and share your feelings =] Dear Lord I hate to go out with a big, heavy mod to vape on :/ Either I get sly looks or strangers coming to ask for a hit :/ I walk my pup with an eGo up my sleeve and 2 in my pocket for stealth vaping on a smokeless campus :/ The heavy hitters are for home =] And the Dibby will be for perusing some magnificent literature and puffing away <3

I do have some magnificent pyrex SS & pyrex brass drip tips ordered =] Now I just need to find a suitable topper that's a BF & LP!

 

[SLIPPY_EEL]

I think mr dibby is sending the eel on a wil goose chase i already did ask him and he sent me a link to this thread haha haa dibby you bugger

 

[ScandaLeX]

Well I'm getting a brass Reomizer. I've no idea what a LP Reomizer is.

Sent from a BIG phone.....Galaxy Note 3

 

[MamaTried]

I think mr dibby is sending the eel on a wil goose chase i already did ask him and he sent me a link to this thread haha haa dibby you bugger

you need to learn how to speak bumblebee

Translation: prices were already posted in the thread and i'd rather build mods than post it again

 

[timk]

After playing with the Omega a bit today, I'll probably buy another cyclone for my dibby. Still need to try something "bigger" in the Omega but the airflow on this thing is intense to say the least. Some big holes in this thing. First test was a dual microcoil with 28 gauge totaling .8 ohms. Not enough coil for the airflow so I'll be trying something a little "hotter" later.

Pricing etc.

Pricing (oh, look, and thoughts):

Couple things. I'm going to be making plenty, plenty of beautiful, unique mods with in-house materials. There is absolutely no need to purchase your own materials. It's an option. Before many of you will be making final decisions on materials and such, you'll have ample opportunity to see pics of completed mods made with lots of woods. Be patient, sit back, relax, imaginate and muse about what you might like. If you're on "the queue", there's no rush. Buying your own stabilized is your own risk, and cost. Prices may change before it's your turn.

There's more; but let's not get complicated.


The following prices are hopeful and subject to change. If I can't sustain at these prices, they will rise.

Standard Mod: $225 + shipping (black richlite caps/button and aluminum plate)

[add: $5 copper plate, $2 SS 510+ post (post only). . . . . . maybe . . .. ]

Custom Body: $225 + shipping (black richlite caps/button and aluminum plate) + your cost on materials/shipping to me

Custom Matching: $250 + shipping (caps and button made of custom materials) + your cost on materials/shipping to me

Custom PITA: ~$275 + shipping (this is where the materials you provide further complicate matters; be it not really strong enough by itself, not stabilized, etc.)


Like Treebeard said: all custom and stabilized materials run some small risk of not being colored throughout, hiding a big ole' knot, or what have you.

 

[custom-classic]

I think mr dibby is sending the eel on a wil goose chase i already did ask him and he sent me a link to this thread haha haa dibby you bugger

From page 23:

Pricing (oh, look, and thoughts):

Couple things. I'm going to be making plenty, plenty of beautiful, unique mods with in-house materials. There is absolutely no need to purchase your own materials. It's an option. Before many of you will be making final decisions on materials and such, you'll have ample opportunity to see pics of completed mods made with lots of woods. Be patient, sit back, relax, imaginate and muse about what you might like. If you're on "the queue", there's no rush. Buying your own stabilized is your own risk, and cost. Prices may change before it's your turn.

There's more; but let's not get complicated.


The following prices are hopeful and subject to change. If I can't sustain at these prices, they will rise.

Standard Mod: $225 + shipping (black richlite caps/button and aluminum plate)

[add: $5 copper plate, $2 SS 510+ post (post only). . . . . . maybe . . .. ]

Custom Body: $225 + shipping (black richlite caps/button and aluminum plate) + your cost on materials/shipping to me

Custom Matching: $250 + shipping (caps and button made of custom materials) + your cost on materials/shipping to me

Custom PITA: ~$275 + shipping (this is where the materials you provide further complicate matters; be it not really strong enough by itself, not stabilized, etc.)


Like Treebeard said: all custom and stabilized materials run some small risk of not being colored throughout, hiding a big ole' knot, or what have you.

ETA: Beat by one minute...

 

[SLIPPY_EEL]

thanking you timk, i obviously somehow missed that page
thanking you custom-classic

 

[lisancentraltx]

Hey now =] I mentioned to a friend that I'd like something 'different' for my Dibby and he suggested a Cannon drip tip with a 306 LR atty. I'm not sure it's a bf though :/ Does anyone know?

 

[SLIPPY_EEL]

Not sure but if he means the driptip that comes with the cannon's, the flat tip's, they aren't for everyone, i was washing vape juice off my lip's the whole time

 

[lisancentraltx]

Thanks for the heads up, Eel =] I don't know that i'd be interested in using a carto at all. they are fine if I'm using VW, but there's better toppers :/ Unique tip, though! I've got a flat tip for a pipe and also for my Eternity... They haven't interested me much :/ Glad to know those leak, though!

 

[supertrunker]

i saw his first drip tip - looked like a knitting needle rammed thru chocolate sponge cake! Yes very good! off centre.

You like your wood - i am solely interested in the maximum abuse of batteries, my magic mundy coil (ty Monkey )and the high performance of the mod = no cleaning.
Gold plated atties? - do me a favour!

As for your inability to use a bottom fed mod without coating your mouth in juice perhaps you are pressing the bottle too hard. There are really not that many variables!

Love and bubbles

T

 

[ukeman]

Well I'm getting a brass Reomizer. I've no idea what a LP Reomizer is.

Sent from a BIG phone.....Galaxy Note 3

Low Profile Reomizer is one that has not been milled at the bottom … its the one that goes on an LP Reo Grand with the big juice catch cup milled down so wider atomizers can fit…( like the Dibby which has no big catch cup so that's the one you want);

Reg. RM2 is narrowed, milled at the base, to fit the Reo Grand large catch cup.

 

[pdib]

I think mr dibby is sending the eel on a wil goose chase i already did ask him and he sent me a link to this thread haha haa dibby you bugger

kay, so, yeah, so, Mr. EEL . . .. the link I shared with you looked like this..... http://www.e-cigarette-forum.com/fo...511889-pdibs-making-mods-23.html#post11854647

That's because the software titles it. If you were to engage the link, it would take you to the exact post you were looking for. Have a little faith, my friend . . . . . push the button, follow the link. Anyway, my peeps set it all straight. All good. (thx peeps)

 

[pdib]

As far as 306 dripping atties (or 510 dripping atties for that matter), all that stuff works just fine on my mods, or on most if not all bf mods. Those of you who aren't interested in modifying atomizers, or even messing with rebuilding coils, should try it. Well, I mean those who are vaping above 1Ω. That's a great way to do great vapes hassle free. I understand there's a tiny little learning curve to bottom feeding with those atties; but it's really no big deal. There's a handful of these that are considered very good. There's some from Ikenvape, Cisco, yada-yada.

Just for kicks, this morning (after reading some of y'all's concerns about modifying and messing with atties), I threw a 1.7Ω carto on my mod for an hour or so. Works great. No worries.

 

[lisancentraltx]

As far as 306 dripping atties (or 510 dripping atties for that matter), all that stuff works just fine on my mods, or on most if not all bf mods. Those of you who aren't interested in modifying atomizers, or even messing with rebuilding coils, should try it. Well, I mean those who are vaping above 1Ω. That's a great way to do great vapes hassle free. I understand there's a tiny little learning curve to bottom feeding with those atties; but it's really no big deal. There's a handful of these that are considered very good. There's some from Ikenvape, Cisco, yada-yada.

Just for kicks, this morning (after reading some of y'all's concerns about modifying and messing with atties), I threw a 1.7Ω carto on my mod for an hour or so. Works great. No worries.

Thanks Dibby =] Glad to know! I am mentioning you on the Nova shows

 

[pdib]

And here's this . .. . .

I hesitated to mention this before, because I felt I should check with a moderator re: whether doing something like this is coo'. I did, and they said it's fine. I'm considering . . .. .I've been considering . . . . I've decided I'm willing to drill out some atties for my peeps. I strongly encourage folks to get the hang of this themselves. Once you've done one or two, it's a breeze, and it opens up a bunch of possibilities. Nonetheless, I understand that not everyone is in a position to do this, or perhaps can't find the time. So, I'm thinking, if somebody is ordering a mod from me, and is in need of an atty to start them out, they could PM me, and we'll work something out along the lines of this → . . . . .

I agree to drill out a specific atty for you (IGO-S, Nimbus clone, etc. . . .. we must discuss first, and I must agree first). You order the atty and have it shipped directly to me. I drill it, and include it when I send out your mod. There will certainly be some kind of charge for this. I will try and keep it reasonable, or in keeping with comparable costs.

What say?

 

[pdib]

Thanks Dibby =] Glad to know! I am mentioning you on the Nova shows

Lucy . . . .. . ?

. . . . 'splain . . ..

(you got some splainin to do)