So, can I just spit on it an buff it with a rag?
Sent from my SCH-R760X using Tapatalk
Sent from my SCH-R760X using Tapatalk
PDIB's Making MODs!
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
Well, if you used a rag, would it be still considered a hand polish?
Just don't use any abrasives, we would hate to imagine that.
Sent from my iPhone using Tapatalk
the way the bottle comes out with the top cap plate makes it a bunch easier to refill than Reo too…
after taking the top plate off with the tube unscrewed but left in the bottle, I blow through the top cap (put your finger on the air hole) to avoid excess dripping all over the place, set it down and refill the bottle with nothing less than my ultimate fave juice
It's even easier to fill with the bottle modded.
Find out how here!
http://www.e-cigarette-forum.com/forum/reos-mods/521257-just-did-bottle-mod.html
Sent from my iPhone using Tapatalk
Last edited:
WARNING: This may be a bit confusing because of my terminology... but someone will understand what I am asking.
There was a discussion about someone drilling holes in the dripper atty 'pins' to make them available to builders. Just pop out the original pin and pop in the bottom feeder pin =]
Who was this person, or store, or whatever... I am really needing a couple more BF attys quickly.
There was a discussion about someone drilling holes in the dripper atty 'pins' to make them available to builders. Just pop out the original pin and pop in the bottom feeder pin =]
Who was this person, or store, or whatever... I am really needing a couple more BF attys quickly.
You're not very secure in your orientation, are you?
Of course there are some wood mods are even more phallic than your typical light-saber setup.
I know I asked this in a question over in reoville... Kind of as a wish lost thing... Lol.
I think the Origen is over their pin as a separate buy, don't know what else their pin would fit though
Sent from my iPhone using Tapatalk
Those are awesome batteries. I've got a DNA-20 mod with one of those in 'em and it's literally impossible for me to kill the charge in that battery in a single day. They're rated 10A continuous discharge current, so if wanted to use one in a dibi, the conservative engineer in me would consider swapping out the 10A fuse for a 7.5A, but that would still let you use coils down to about 0.6 ohms.
It's even easier to fill with the bottle modded.
Find out how here!
http://www.e-cigarette-forum.com/forum/reos-mods/521257-just-did-bottle-mod.html
Sent from my iPhone using Tapatalk
awesome MON, ! i assume you did it? i mean --- you don't have to unscrew the cap?
that can't b right… i mean you h ave to unscrew it to fill it., or not
right?
Nope, there's no bottle cap. Just the tip insert that snaps into the bottle. Snap in> screw on.
No o rings to worry about, and snapping it in is a.. Umm. Snap!
Never ever had a leak with this modification. The tube is so tight in the hole in the insert it acts as it's own o ring.
Here's a pic:
Sent from my iPhone using Tapatalk
No o rings to worry about, and snapping it in is a.. Umm. Snap!
Never ever had a leak with this modification. The tube is so tight in the hole in the insert it acts as it's own o ring.
Here's a pic:
Sent from my iPhone using Tapatalk
Nope, there's no bottle cap. Just the tip insert that snaps into the bottle. Snap in> screw on.
No o rings to worry about, and snapping it in is a.. Umm. Snap!
Never ever had a leak with this modification. The tube is so tight in the hole in the insert it acts as it's own o ring.
Here's a pic:
Sent from my iPhone using Tapatalk
Yeppers, that's how I do it too. It is way easier and pairs your socks for you as well.
BTW: when I send out a mod, I include an already snipped/drilled "inner cap", "squeezy insert", "dripper tipper" . . .. whatever . . . in your goody-bag.. If anyone wants to start fresh with that on the tube, tell me, and I'll put the screw-on cap in the goody bag instead.
Last edited:
That would be awesome for me sir!
Also does anyone here use 24g wire? Or the Rene41? I wanna try it but I don't wanna buy a spool. Anyone know where I can get a couple of feet of each for cheap?
Last edited:
√ on the cap IMEDIC. I have René41 and 24g Kan. And . . . . I'm sending you some mail anyway .. . . so, unless 2pak is unyielding in his kindness, I can just throw those in with your mod.
I'd like to try some Rene too pdib...
Just saying...
Lol
Sent from my iPhone using Tapatalk
Just saying...
Lol
Sent from my iPhone using Tapatalk
Pdib that would be sick! 2pak is gonna send me some 24, but that Rene would be awesome! Just let me know how much extra you want for the wire. I just hate to spend the kinda money on 100ft spools and hate it. But I also hate buying 25ft spools and now having to wait for more to show up. Lol! It's a problem I know.....
I just hate to spend the kinda money on 100ft spools and hate it. But I also hate buying 25ft spools and now having to wait for more to show up. Lol! It's a problem I know.....
I'd like to try some Rene too pdib...
Just saying...
Lol
Sent from my iPhone using Tapatalk
yip . . . . . .
Pdib that would be sick! 2pak is gonna send me some 24, but that Rene would be awesome! Just let me know how much extra you want for the wire.
yup . . . . .
Yay! Buttered bread AND a new wire to try? Fantastic!
Seriously though thank you both peter and mundy( I don't know if that's a moniker or your real name, unfortunately, sorry!)
Sent from my iPhone using Tapatalk
Seriously though thank you both peter and mundy( I don't know if that's a moniker or your real name, unfortunately, sorry!)
Sent from my iPhone using Tapatalk
- Status
Similar threads
