PDIB's Making MODs!

[The Ocelot]

Here this may help girl
Pdib OliveR Walkthru - YouTube
The oliveR By Pdib - YouTube

Perfect mod for your rba now that you got the mad skillz and can wrap like an OG ohmie

I have to sleep now, but I will watch them tomorrow. I need more RM2s. I discovered they fit on my Phiddies.

 

[Alexander Mundy]

For those who like to play, there is a dna 30 CO-OP

Saw that you and Rossum got in also. It is full now. You got any specific plans for them? I have a hand phaser one might go in so I can be one of the cool kids. Wish that YiHi SX350 Co-Op would happen but doesn't look like it since Evolve has so many fanboy's. It is a down converter to 1.5V as well as up converter to 9.5V and will handle down to 0.2 ohms and you can select bypass mode good to 12.5A.

 

[cecsystems]

I don't much care about your Ferraris and Lamborghinis and so on - I like the vape from my Dibi and so that comes to work with me. I like the vape from my Reo too, so that comes along as shotgun. To work - to anyplace.

My first impression of the becu spring is i cannot tell the difference between that and a Turbocad-style noaloxed Dibi, except i only noaloxed the base of the firing button, cos then i got tired!

T

You must be hardly workin on that "Bone Idle" angle again! lol.

 

[cecsystems]

Had a friend that got T-boned in his built up AMX. We dropped that 390 in a Gremlin and it was stealth game on!

I had a 1974 AMX Javelin... Damn sexy car. I had just joind the USAF and didn't know shi t about shi t and the timing chain jumped a tooth or two and I took it to the WRONG place to get it repaired Long story short... didn't run after that and I needed a car so 1978 Toyota Celica here we come. I paid 500 for the AMX. If I'd have only known then what I know now... Damn it. I also beta tested AOL, If I'd only bought stock... Damn it! lol.

 

[Filthy-Beast]

Saw that you and Rossum got in also. It is full now. You got any specific plans for them? I have a hand phaser one might go in so I can be one of the cool kids. Wish that YiHi SX350 Co-Op would happen but doesn't look like it since Evolve has so many fanboy's. It is a down converter to 1.5V as well as up converter to 9.5V and will handle down to 0.2 ohms and you can select bypass mode good to 12.5A.

No I don't. I'm getting a bf mod that has a DNA 20 in it and was thinking about switching in a 30.

We can work something out for the 2nd one, I got.

 

[reoluvr]

I'd love to try the mundys magic also

Sent from my SCH-I535 using Tapatalk

 

[Bimini Twist]

For those who like to play, there is a DNA 30 CO-OP

Missed again. Ah well, its not as if my little project list is all caught up. I still haven't gotten around to running the Sirius wires under dash in my car after two years or so. Yeeeuuugly.

 

[Alexander Mundy]

I had a 1974 AMX Javelin... Damn sexy car. I had just joind the USAF and didn't know shi t about shi t and the timing chain jumped a tooth or two and I took it to the WRONG place to get it repaired Long story short... didn't run after that and I needed a car so 1978 Toyota Celica here we come. I paid 500 for the AMX. If I'd have only known then what I know now... Damn it. I also beta tested AOL, If I'd only bought stock... Damn it! lol.

I have lots of "If I'd only known". 67 RS Camaro, 68 Camaro, 72 SS Camaro 65 Mustang, 57 Crown Vic, 71 Pantera 351 Boss. Nothing exceptionally special about them at the time I had them, except the Pantera and I got it used for $12.5K in '80 Lol

 

[Rossum]

Saw that you and Rossum got in also. It is full now. You got any specific plans for them? I have a hand phaser one might go in so I can be one of the cool kids.

I'm looking at making some mods out of an injection-molded plastic housing that I use for a product I sell. These would be "novelty" mods (conceptually similar to an NES mod) that I plan to give to a couple of my better customers who still smoke traditional cigarettes. I also have a few DNA mods already that I want spare parts for, and of course I still have this fantasy about a DNA-powered OliveR. Now I was gonna say that I could probably be persuaded to part with one for what I'm paying for it plus some of your wire to try, but then I looked at the list and see you're on it for a couple of 'em already...?

 

[Alexander Mundy]

I'm looking at making some mods out of an injection-molded plastic housing that I use for a product I sell. These would be "novelty" mods (conceptually similar to an NES mod) that I plan to give to a couple of my better customers who still smoke traditional cigarettes. I also have a few DNA mods already that I want spare parts for, and of course I still have this fantasy about a DNA-powered OliveR. Now I was gonna say that I could probably be persuaded to part with one for what I'm paying for it plus some of your wire to try, but then I looked at the list and see you're on it for a couple of 'em already...?

I'm down for 2. Not sure what I'm going to do with them yet, but I'll figure something out. I have been known to modify stuff.

 

[timk]

Missed again. Ah well, its not as if my little project list is all caught up. I still haven't gotten around to running the Sirius wires under dash in my car after two years or so. Yeeeuuugly.

you can get on the Backup list with me haha I missed it too. here is backup sign up list: https://docs.google.com/forms/d/1yXUZEiIDXrKG5cUztV_31YrttWpqSB8GpV2L659u6L8/viewform

 

[Aal_]

Stupid question. Why Noone uses those metal bending things as an alternative to springs. Since you have a fuse and all. I used to see those in electrical toys when I was a kid. They should have better conductivity no?

Sent from my SM-N9005 using Tapatalk

 

[ValHeli]

bec. leaf springs flatten over time perhaps? Or maybe it's a matter of sourcing?

 

[Aal_]

bec. leaf springs flatten over time perhaps? Or maybe it's a matter of sourcing?

Maybe maybe. I will use it in my future mod that I make, the theoretical mod in my head lol.

Sent from my SM-N9005 using Tapatalk

 

[turbocad6]

ah, I missed the gb, got on the backup list

 

[Aal_]

Something like that

Sent from my SM-N9005 using Tapatalk

 

[ValHeli]

When you mentioned old toys, I knew exactly what you were talking about. I still have some of those around! LOL .. all made of tin, tabs folded over slots instead of screws, and leaf springs in the battery case!

Something like that

Sent from my SM-N9005 using Tapatalk

 

[glassgal]

I have to sleep now, but I will watch them tomorrow. I need more RM2s. I discovered they fit on my Phiddies.

Oooh. Is THAT what you got? That's gorgeous! I have all new appreciation for wood mods now.... but... the Dibi are the nicest looking

 

[Aal_]

I wish I had some here to try them on my REO. Brb screwing up my son's toys

Sent from my SM-N9005 using Tapatalk

 

[pdib]

Stupid question. Why Noone uses those metal bending things as an alternative to springs. Since you have a fuse and all. I used to see those in electrical toys when I was a kid. They should have better conductivity no?

Sent from my SM-N9005 using Tapatalk

curious as to what this means . . . . . . (it's Greek to me)

You mean a wave spring washer?


ADDIT: sorry, late to the party. ignore pls.