PDIB's Making MODs!
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
I did not mention the Sony, but I do have the VT4s. I don't care for them. They swing too much, but they will vape my face off right off the charger haha. I think the Samsung vape a flatter slope for a whole day for me compared to the LG. LG might be better for under .5ohm? Don't know, I'm happy at .6ohm
Both are very good to me and better than the VT4s, IMO, YMMV 
Also want to add, these batteries were used in my Poldiac/TNS setup with ss cable/mesh wick which I think is a little harder on batteries than say a microcoil. I use the aw1600 in my reo until I can get around to modding the reo for flat tops. I can get 3/4 of a day on the 1600s for comparison.
I think there's some merit to Rossum's idea, all things being equal. In my case it really depends if i am showing off or not. If i run 0.7Ω single coils, then i can get from a waking start to beer o'clock on one battery.
If i am being an ... and running duals at 0.3Ω then not so much and i think duals skew the juice consumption figures too. This is no issue for me since i make my own juice, but if i were vaping say, Five Pawns Gambit at $30 a pop, then i'd be running a 2Ω coil on an 18350!
T
If i am being an ... and running duals at 0.3Ω then not so much and i think duals skew the juice consumption figures too. This is no issue for me since i make my own juice, but if i were vaping say, Five Pawns Gambit at $30 a pop, then i'd be running a 2Ω coil on an 18350!
T
I did not mention the Sony, but I do have the VT4s. I don't care for them. They swing too much, but they will vape my face off right off the charger haha. I think the Samsung vape a flatter slope for a whole day for me compared to the LG. LG might be better for under .5ohm? Don't know, I'm happy at .6ohm
Also want to add, these batteries were used in my Poldiac/TNS setup with ss cable/mesh wick which I think is a little harder on batteries than say a microcoil. I use the aw1600 in my reo until I can get around to modding the reo for flat tops. I can get 3/4 of a day on the 1600s for comparison.
Thanks. Damn I need coffee
yes, of course. I did say for the sake of easy math and considering real life factors that it would be much less.
Hey master, While we're on the subject, well we werent, so im changing it, ive been really curious about rhis unflavored vape some of you have mentioned. Wonder if you would sell me some, so I can try some before I invest in diy.
Sent from my SCH-R760X using Tapatalk
Sent from my SCH-R760X using Tapatalk
Agreed on the "how long they last me" not being very scientific for batts. But I thought my "how long they last me" would be useful, as it was a comparison with those factors being the same (being me) and resulting in a ratio. 8:12 and 10:14 ratios. And SFM has the AWs to establish his baseline for the first number of the ratio.
I have the aw 1600 as well, and the "How long they last me" formula brings them in at 6am to 5pm.
I certainly could, but I have a better idea, because it's less work for me
http://www.mtbakervapor.com/nicotine-juice/baker-vapor-e-juice/
buy a little 15 ml bottle of their unflavored juice at whatever mg you use normally, in whatever ratio pg/vg you use normally. That way you get exactly what you want. I use a calculator to do mine, but I'm a little slap dash when I'm mixing lol
Otherwise, PM me your address and how you'd want it and I'll mix you up a little sample 3 ml bottle for free. I'll try to be as close to exact as possible
Sent from my iPhone using Tapatalk
I certainly could, but I have a better idea, because it's less work for me
http://www.mtbakervapor.com/nicotine-juice/baker-vapor-e-juice/
buy a little 15 ml bottle of their unflavored juice at whatever mg you use normally, in whatever ratio pg/vg you use normally. That way you get exactly what you want. I use a calculator to do mine, but I'm a little slap dash when I'm mixing lol
Otherwise, PM me your address and how you'd want it and I'll mix you up a little sample 3 ml bottle for free. I'll try to be as close to exact as possible
Sent from my iPhone using Tapatalk
I honestly didn't know I could get it there. I guess I've never looked for it while shopping for juice. I'll order from them. Thanks mon
Yup... It's listed under the flavors as um... Unflavored. Lol
That's where I picked up my test bottle. Immediately after I bought 2 months worth of mixing supplies lol
Sent from my iPhone using Tapatalk
That's where I picked up my test bottle. Immediately after I bought 2 months worth of mixing supplies lol
Sent from my iPhone using Tapatalk
I'd say MBV also to try it out, but if you like the unflavored, get the nic base (PG or VG), from Wizard Labs for your DIY, and amazon for the opposite plain PG/VG.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Completely agree with borescoped. I get my nic from wizard labs, and my pg/vg from amazon. I believe super_x_drifter gets his nic from myfreedomsmokes, and is quite pleased with it
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
i mix all mine by weight. It's simple and ofc lazy. One bottle on scales (that measure to 1/100th of a gram) and pour it in. No messing, no washing up, no hassle from HRH.
T
T
ha, I kinda get the sense that you're somehow just a little happy about that?
From all your calculations I conclude: man everyone here wakes up real early lol
Sent from my SM-N9005 using Tapatalk
Lmao
Sent from my iPhone using Tapatalk
- Status
Similar threads
