- Status
No Flooding here Im kicking back while I recover from the freight train smack. Think its to play some need for speed.
Yup, low enough now! Sorry, thought the 'after' pics explained that..
Now if I could just work out how to get the top back on without flooding...... I know how to do it with my Ody, but Penelope... hmmmmmm
Here u go bud fast forward the video to 20 min
The Haze Hour
lol, he screwed it on fast. Surprised he didn't flood when he opened the flow control.
Well after the absurd parts free for all last night I finally got to throw a coil in my pen only to find that it leaks (before I put the cap on). No clue why. Gonna try my other one this morning. Did not have any problems with my Ody...so idk
u got to tighten the control ring to the base. also the flow control has to be tight. when you need juice just open the flow a little for a few seconds then close it again. That's how I been using mine so I don't get any gurgle when I drag. keep it clean and you will get those train hits. My second Penelope I made it with 3 wicks and that brings a real good amount of vape and taste.
Well I'm at a complete loss...both of my pens are leaking. I have had an Ody for over a week now with no issues and know about tightening the rebuildable screw and liquid control. With everything tightened, I just don't get how they could possible be leaking, but they are. Thankfully my Ody is giving me love while I figure this out. I guess I'll go back over some videos or something. It must be user error since both are doing it. Thanks for the support guys!
Where is it leaking? Is it from the center post (510 connector)? or the outer cylender?
for all those issues please see what I wrote on the first post here guys:
http://www.e-cigarette-forum.com/forum/gg/300284-reviewing-penelope.html
http://www.e-cigarette-forum.com/forum/gg/300284-reviewing-penelope.html
I had this same issue as well, but figured it out pretty quick. I have put eliquid into Penelope that just didnt taste right in cartos that I LOVE in the Penelope now. Happiest vaping moment ever...
LOL @ Clint...
You should not have any leaking... tho where is it happening at?
You should not have any leaking... tho where is it happening at?
It's leaking from the center post. I checked the post that Imeo referred to and I still don't know. My center post nut is tight, the wick is in the whole length of the channels, etc. what baffles me is that none of these things should matter if liquid control is closed. Because of this, I don't believe this to be a flooding problem because you have to have the juice control open to flood these things. So that leads me to conclude that it's is leaking from inside the ceramic, but my o rings are there so that doesn't make since either??? I think Im gonna remove the wick and coil from one and pour liquid down the channels to see if my o rings are sealing properly.
Are you laughing at Clint because his happiest vaping moment ever is not reflected in his picture
And Clint, what did you do to resolve the Issue?
if you feel gurgling please check the thread here guys
http://www.e-cigarette-forum.com/forum/gg/300284-reviewing-penelope.html
http://www.e-cigarette-forum.com/forum/gg/300284-reviewing-penelope.html
Ok I'm still baffled but I did get it up and running...amazing vape as I knew it would be...thank you for another fantastic product Imeo.
I removed my coil and put everything back together, then filled with liquid to check the seal of the o ring at the post and Penelope base...no leaking or flooding. I put my coil back just I had it before, filled with liquid...no leaking or flooding. So in conclusion, I have no clue
but I am happy none the less to have it working! And they look great on my Provari's so since I only have 2 mods and 3 of Imeo's attys, the Ody is gonna be sitting patiently on the shelf until I can get a GGTS...the proper home for him 
Oh my god. No kidding. I've got a small crack on my ceramic. Housing was loose upon arrival. Saw the crack but tightened it. Found soapy taste. Course that meant disassemble and clean. But the ONE PREMADE made for an interesting reassemble. It was like scrapping pieces of twine begging to make it when tying up your garden hose. Now won't fire because its short and loose (or shorting because it lays where the ceramic is cracked). Support to COV submitted for ceramic but I can't even order some spares. I feel like I'm refreshing their page just waiting.
Yeah Justin...all is good now! Thanks for checking. And I have to agree with others who have stated that its great to have you on board with Bruce. Thanks again.
cheers river
Ok I'm still baffled but I did get it up and running...amazing vape as I knew it would be...thank you for another fantastic product Imeo.
I removed my coil and put everything back together, then filled with liquid to check the seal of the o ring at the post and Penelope base...no leaking or flooding. I put my coil back just I had it before, filled with liquid...no leaking or flooding. So in conclusion, I have no clue
- Status
