Penelope V2

[tazz]

Well, I was lucky enough to order another one from E-smoke which came in the other day, good thing cause that is one of my presents for my wife. On the other hand, the one from COV seems to be going nowhere so I'm in the same boat as everyone else.

 

[V4Vendetta]

For the peny v2 tip it seems to take away the heat

I also find it to be cool vaping experience but haven't had a time to play around with different build. I have two and they both have 1.2ish microcoil with organic cotton ball wick. Both seem to be have cool vape, especially with provided mouthpiece.

 

[Seapup]

Well, I was lucky enough to order another one from E-smoke which came in the other day, good thing cause that is one of my presents for my wife. On the other hand, the one from the LIARS and THIEFS at COV seems to be going nowhere so I'm in the same boat as everyone else.

I received mine from COV this afternoon.

 

[Rajuisha]

I send him the last ones today Raj. He will put them for sale in 1-3 days I think

That's great. Thanks my friend. Hopefully I'll be able to snatch one

 

[markuss]

if we want to have a drip option we have to make thin mouthpieces Stan. Exactly like atomizers. Atomizers have 8,65 hole and 9mm outside diameter. That way, drip tip and GG mouthpiece will have exactly the same diameter outside

We can make thicker mouthpieces of course. The maximum we can go is at 10mm. Its not a small amount of thickness for Steel. But I dont know if they will look nice with an 9mm drip tip on it

I can make some solid mouthpieces, not a problem Lo Zio. Maybe I will start making them on Monday. I really want you to be happy

Very thanks Imeo, I don't like the drip whith the air control, reduces flavour and th. But if you make a new mouthpiece, we loose the posibility of air control, so why don't you make a sort of new center post pin whith different holes?

Enviado desde mi HTC One X mediante Tapatalk

 

[markuss]

This can be a good solution for me. A solid one piece mothpiece, whith different post centre pin's to try and choose the best for me. I only have gg rba's, I don't have drip tips and I don't want.

Enviado desde mi HTC One X mediante Tapatalk

 

[Sad Society]

Ha...Got the V2 today. Set it up and the bottom pin was loose. It was also not aligned....giving me a short. I did what Imeo showed us in the video to straighten and the brass nut broke off. the brass threads are still in the bottom where it broke and now I can't screw the bottom brass back in. Never even got to try the V2.

Now I'm scrounging around my house looking for a small screw that could possibly replace that part.

 

[Sad Society]

Looks like I'll have to get a screw from Esmokeguru. Since I need a hollow screw to replace.

 

[fright88]

Is it possible to straighten it out without the brass pin installed?

 

[Sad Society]

Is it possible to straighten it out without the brass pin installed?

IDK, but I know I won't be doing that again with a new part. That brass pin is fragile.

 

[Jojobo]

I think the best solution to protect the delicate brass screw is to take that screw off, adjust the post and then replace the screw. May take a few times to get it straight but at least no broken screw from making the post straight. Not a solution for damaging the screw from over tightening to a mod but at least this should help.

 

[Jojobo]

fright...you and I had the same thought!

 

[imeothanasis]

yes, you can do that fright

Is it possible to straighten it out without the brass pin installed?

 

[imeothanasis]

ask him for a free one sad.

Looks like I'll have to get a screw from Esmokeguru. Since I need a hollow screw to replace.

 

[pt91]

Rcvd My P2 from Esmoke yesterday.
Any links and/or suggestions for NOT messing up the little screw? Would like to get it cleaned and set up today.
Tks in advance and Happy Holidays everyone.

 

[Sad Society]

ask him for a free one sad.

Thanks Imeo. I don't know if the center post was off or if I had a short somewhere else on my first build of the V2. I have no problems lately with building the V1 so I thought the V2 should be no problem. I will let e smoke know of my situation...and see about getting more than one screw as well. Just in case.

 

[Jojobo]

Rcvd My P2 from Esmoke yesterday.
Any links and/or suggestions for NOT messing up the little screw? Would like to get it cleaned and set up today.
Tks in advance and Happy Holidays everyone.

Seeing that you got it from esmokeguru, I would leave the entire housing intact minus the oring...rinse in hot water...soak in everclear or vodka if you want to "sterilize it"... clean the rest of the penny as desired...build penny...remove brass screw...adjust post IF necessary according to Imeo's video (except remove brass screw)
that's the best I have to offer...good luck

 

[dutch onsea]

Hello guys,
Wandering wether some of you have the same issues like me. I`m using the penelope on a provari. I`m using the premade(1.5) wires and a 3 mm wick doubled at the coil. I can cranck the power up to 4.8 V and this gives me descent amount of vapour and flavour but I`m lacking TH. I`m using a 18mg strenght 70/30 juice wich normally does the job quit well. What should I do? Lower the ohms and use it on the JGG?

 

[Itshak]

Hello guys,
Wandering wether some of you have the same issues like me. I`m using the penelope on a provari. I`m using the premade(1.5) wires and a 3 mm wick doubled at the coil. I can cranck the power up to 4.8 V and this gives me descent amount of vapour and flavour but I`m lacking TH. I`m using a 18mg strenght 70/30 juice wich normally does the job quit well. What should I do? Lower the ohms and use it on the JGG?

If you r using it with the original DT,then you can try with regular DT or without any,
see if it's make diffrent.
Your volts per ohm should be more then enough for good solid TH on 18mg!
JGG give more options becous you will be able to reduce the airflow coming from below coil,
And that may produce better vape expirience.

 

[D Stanley Querfurth]

Imeo Penny​

​