Isn't that resistance kinda low... I've heard you shouldn't really go lower than .7ohms for mtl, but I'm not sure...just what I've read on here.
Yes it is...but no it isn't. Anything below 1.0 ohm is technically subohming, but many MTL'rs will build a .7 thru.9ish SS/K1 build without thought. Usually adding more WRAPS and a 28g wire. It really is the power sent to the coil. I keep the WRAPS about 5 to 6 so as not to scorch the center cotton. I want a warm vape and N80 is fast firing. At 16.5 watts it is warm but not to hot for the air and chamber. Wicking is not an issue and keeps up well. It's a great setup. But don't go above 17.5w...then it becomes a problem.
Raff Mods Ranger OKR-T/10 box with the OFRF Gear RTA in bubble mode and some very decent french toast.
It's not really a matter of "shouldn't." Nothing bad or dangerous happens if you do (on a regulated). But most don't. I started mtl'ing around 1.5 ohms. But over time, I've played with a lot of different builds on my doggies, and find that my sweet spot is 0.58 ohms on 316L SS 28ga, 7 wraps 2.0mm ID, at 8.5W, which usually hits 420-430F. I think the smaller coil allows more of it to be directly hit with the airflow intake, resulting in a more solid, flavorful vape.
Brewdawg1181....thats a good build too and right at my heat level as well. The air to coil is so important with these builds, wicking, etc. What may work with one atty not so much on another.
Sounds good, the reason I asked is, I bought these Clapton mtl pre made coils that come out at .68ohms. I'm getting a wonderful vape at about 13 to 15 watts with these.
Rockford...I like my SS coils MTLing, but for me once in awhile N80 changes my vape just enough. My SS gives me a sharp crisper flavor, but for a medium rounded flavor I like N80. On my squonkers I like a good duel stage coil with a single core of N80 wrapped between the clapton coils. Thats my all time favorite, but that on an Enthion or something else not an MTL.
These are the coils I'm using right now
$3.18 Authentic Vandy Vape Ni80 Superfine MTL Fused Clapton Pre-Coiled Wire - 10pcs/pack / 30*2/38 AWG / 0.25mm*2/0.1mm dia. / 0.7ohm at FastTech - Worldwide Free Shipping
I have heard of them and hear they are good coils...for the price you can't beat it. Along time ago I bought the "Daedalus V1" coil jig. I male something similar. I use 2xSS or N80 30 or 32g/wrapped in SS40g. A very thick dense cloud and tons of flavor. Look into a Daedalus but buying what you are is much easier and cost effective.
$3.18 Authentic Vandy Vape Ni80 Superfine MTL Fused Clapton Pre-Coiled Wire - 10pcs/pack / 30*2/38 AWG / 0.25mm*2/0.1mm dia. / 0.7ohm at FastTech - Worldwide Free Shipping
I have heard of them and hear they are good coils...for the price you can't beat it. Along time ago I bought the "Daedalus V1" coil jig. I male something similar. I use 2xSS or N80 30 or 32g/wrapped in SS40g. A very thick dense cloud and tons of flavor. Look into a Daedalus but buying what you are is much easier and cost effective.
How is that Cannolio fkavcir? Been looking for a good one for a while
Raff Mods Ranger OKR-T/10 box with the OFRF Gear RTA in bubble mode and some very decent french toast.
Their french toast has been a favorite of mine from their line. I've probably vaped 5-600mls of it in the past year. It's a sweet, not too eggy vanilla custard with a hint of cinnamon. I like their pebbled flavor as well. There is a sort of light cannoli filling flavor in the base of the ones I've tried. They have a glazed donut that's pretty popular, but it's nowhere near as good as Loaded Glazed, one of my all time favorites. I'd recommend the french toast, though.
Baby Choo checking out the Dani Mini and 21700! The Dani's are so resilient and remain sparkling new despite a lot of usage and even going fishing! The Dvarw DL fits perfectly and they look made for each other!
Christmas present to myself arrived today-
The Ultroner EOS I in pink- they even sent a spare set of stabwood doors in green.
The Ultroner EOS I in pink- they even sent a spare set of stabwood doors in green.
Similar threads
- Locked
