Picture of Your Setup Part 3!

[KayP]

Still a good deal. You shouldn't be disappointed. As for vaping above 40 watts? Not really necessary with a good TC build, I've found.

Sent from my SAMSUNG-SM-N910A using Tapatalk

USD$35 shipping fee - So it's not worthwhile for me unless I attempt to order as many units that shipping fee will allow me. Regardless, the reduced price is clearly worthwhile, and as you said the dna board itself is worth more. And your matchy matchy set up looks very cool!

Sent from my SM-G900I using Tapatalk

 

[Shawn Hoefer]

thx, just added a couple rolls of ni200 to my temco cart for my next order at some point in the future.

28 gauge for single coil, and 30 gauge for dual coil is what I've found works best.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[MikeyConti]

The Blue Hana One is 20$ shipped, alone, not the "Complete" kit which includes a dual 18650 sled and shipping is $9. The Grey and Black ones have dropped in price but have $9 shipping. Too me, all colors, Single and Complete are worth it.

At least last time I checked.

I also got a HCigar HB dna 40 on clearance for $20 cant remember where, but as said above, the board is worth it.

VaporDNA lists the HCigar HB 40 for over $100

 

[Eskie]

Dual 18650's on a DNA 40? I don't know Hana at all (other than recognizing the name) but is it normal to use a dual sled for a 40W DNA board?

 

[CrayCrayRay]

Looks almost like a 30mm baby bottle.

Serpent Mini+Therion

Playing with new printer by wrapping some batteries. Same picture represents a married set.

 

[Fozzy71]

nice, love the battery wrap idea. I need to look into that for the 3 sets of 6 I have coming for my rx200s's and istick 200tc's that are waiting for me to play with them.

These two are making a lovely pair tonight while sipping some 130 proof jack daniels single barrel, barrel proof whiskey:

*Looks like it's time to wash my drip tip on that stainless lol. Note to self: buy a bunch of black drip tips.

 

[CrayCrayRay]

I see you took advantage of the $20 deal too!

Hows the build quality? If it comes down to it I guess I could re-purpose the board.

 

[rhelton]

The blue one was free shipping and I think it still is. The "Full kits" have a shipping charge.

 

[rhelton]

thx, just added a couple rolls of ni200 to my temco cart for my next order at some point in the future.

Like I said earlier I have 4 Dna40's and two of them are a Hana One mod. One of them ive had for over a year and it still functions fine and is my daily beater I take to work most of the time. The other one is in its case for use later on when I need it or to use the board for a DIY mod maybe but really its size and functionality is probably better than a mod I could build. If you take care of your devices it will last you a long time.

 

[CrayCrayRay]

The blue one was free shipping and I think it still is. The "Full kits" have a shipping charge.

Showed shipping for me when I placed an order a few minutes ago.

 

[rhelton]

Dual 18650's on a DNA 40? I don't know Hana at all (other than recognizing the name) but is it normal to use a dual sled for a 40W DNA board?

you must be looking at the full kit. Those come with a single battery compartment and a dual battery compartment being modular. The dual compartment is run in parallel for extended battery life. When I use the dual sled I get up to three days on a single charge.

 

[rhelton]

20 bucks for a Dna40 plus shipping.

Still the best deal you will ever get for one.

 

[CrayCrayRay]

20 bucks for a Dna40 plus shipping.

Still the best deal you will ever get for one.

I agree. I feel no risk in this transaction.

 

[rhelton]

I have been stock piling for the future with the best gear I could afford. Im not quite done yet but I am getting closer. It is going to get extremely difficult and extremely expensive to get a hold of quality gear probably sooner than we all think.

It would be smart to buy 2 or 3 of those One mods and whatever else you can afford.

 

[rhelton]

I agree. I feel no risk in this transaction.

Yah it was a non risk deal for sure.

 

[rhelton]

Looks almost like a 30mm baby bottle.

Serpent Mini+Therion

Playing with new printer by wrapping some batteries. Same picture represents a married set.

Nice collection........what is the mech mod?

 

[CrayCrayRay]

Nice collection........what is the mech mod?

That is a dovpo punisher 80w. He's just tucking his junk.

Sent from my SM-G935T using Tapatalk

 

[rhelton]

That is a dovpo punisher 80w. He's just tucking his junk.

Sent from my SM-G935T using Tapatalk

Ohhh hahaha

You really have a great collection of gear.

 

[Haktuspit]

I've actually never posted a pic in any of these threads in 3+ years of being around because I've never really had anything I was exceptionally proud of. Just about everything I've ever had from day one has been stock with replaceable coils and quite boring.

But today I built my very first coil on a Griffin 25 and it works! 26 Gauge kanthal dual coil came out at 0.45 ohms and currently vaping at 34W. Scared to get a dry hit at the moment as I vape Max VG Heavenly Tobacco (If you're never had it, think thickest juice on the planet) but so far so good, just an almost dry hit that went away after I got an air bubble out.

Pretty impressed already, I've been using Kanger Subtanks for over a year and have never even attempted to vape one without letting it sit for 12 hours because of my juice. Started using this one less than 15 minutes after wicking.

I CAN BUILD GUYS!!!! I DID IT!

 

[OhTheAgony]

soak them in rubbin alchohol for a day then rinse em and air dry em for a bit. I had a U Can that had some forgoten Pluid for a couple years, two days in a cup with alcohol and a long cold water rinse and I was back in business.

Thanks for the tip

Is that just regular cleaning alcohol you use or does it have to be food-safe alcohol? The latter is rather expensive here at ten bucks per 100ml (that's over 70% in taxes I believe, lol).