Picture of Your Setup Part 3!

[cocy c]

Vary nice liking the look.

 

[TrollDragon]

Vary nice liking the look.

It is a looker!

It's a 3 dressed up as a 9 though...

 

[KayP]

Squonk!

Sent from my SM-G900I using Tapatalk

 

[J.d. Roberts]

As we speak, tomorrow something else, I like to rotate..

 

[Hangtown]

Bought the smok TFV4 Used it for a half a tank Picked it up again and my mod was covered in juice. So I took it apart could find no reason. Filled it again and it hasn't worked since. Tried new atomizers Both my Wismec and Sigelei say there is no atomizer. any ideas?

 

[kteto]

My one and only stealth mod. All of my china J mod has been in graveyard box even since i got this mod.

 

[r055co]

Just got a Vertex triple parallel and trying out the new flavor from my favorite juice company.

Sent from my Nexus 6 using Tapatalk

 

[cocy c]

 

[KayP]

 

[KayP]

 

[MikeyConti]

That's a Perfect match!

 

[KayP]

That's a Perfect match!

Thanks buddy; I'm chuffed. Pun intended

 

[Txaggiesaunt]

 

[TrollDragon]

Looks Excellent!
Which tip is that and did it require a little bit of wrapping to get a snug fit?

 

[TrollDragon]

Now were talking, The wraith is starting to get a little better.

 

[Nailz]

Blacked out, Lavabox M DNA75

 

[KayP]

Now were talking, The wraith is starting to get a little better.

Nice. Is that the Tsunami 22 or 24?

Sent from my SM-G900I using Tapatalk

 

[KayP]

Looks Excellent!
Which tip is that and did it require a little bit of wrapping to get a snug fit?

I got the tip from FastTech: $4.34 Epoxy Resin Drip Tip for KENNEDY 24 & AV Torpedo Combo RDA Atomizers - 12.8mm / random colors at FastTech - Worldwide Free Shipping, and I was lucky enough to score one that matched my RDTA; note that they won't let you choose the colour, which is annoying. It was a bit loose but a little thread seal tape/plumber's tape fixed that issue.

Sent from my SM-G900I using Tapatalk

 

[TrollDragon]

Nice. Is that the Tsunami 22 or 24?

Sent from my SM-G900I using Tapatalk

The 22 was all the local B&M had, it has a tiny wick area and you have to be careful when you squonk. Those big dual air pipes under each coil drain juice quite well.

I got the tip from FastTech: $4.34 Epoxy Resin Drip Tip for KENNEDY 24 & AV Torpedo Combo RDA Atomizers - 12.8mm / random colors at FastTech - Worldwide Free Shipping, and I was lucky enough to score one that matched my RDTA; note that they won't let you choose the colour, which is annoying. It was a bit loose but a little thread seal tape/plumber's tape fixed that issue.

Sent from my SM-G900I using Tapatalk

Thanks!
I picked up a couple of those already. Used a strip of Aluminum Tape a littler narrower than the width of the friction area for 1 1/2 wraps.

 

[KayP]

The 22 was all the local B&M had, it has a tiny wick area and you have to be careful when you squonk. Those big dual air pipes under each coil drain juice quite well. [emoji38]


Thanks!
I picked up a couple of those already. Used a strip of Aluminum Tape a littler narrower than the width of the friction area for 1 1/2 wraps.

I'm familiar with the claustrophobic wicking area in the 22mm version; I have one. I held off getting a 24mm version and ordered for a BF pin instead. Upon your return, and in hindsight, the 24mm version maybe more preferable for squonking; however, the fault with bottom air flow holes still remain. I suppose one will just have to be diligent against over-squonking, as much as being diligent against over-dripping. It's a small price to pay if one believes bottom air flow atomisers produce better flavour.

Anyways, how are you finding the COV Squonker? And how does it cope with wattages and battery life?

With regards to the resin wide bore drip tip: Yes I like mine too. It's much better than the supplied tip.

Sent from my SM-G900I using Tapatalk