Every time I see a goon 1.5 it reminds me of my No Limit Glok 24. The Glok gives a great vape but it is so easy to over-drip on and/or leak when you tip it that I took it out of the rotation.
Here is an old pic of it:
And the deck in case you have never seen it:
Today's setup is the Athena kit built with a coilology tri-core fused clapton 3-26/36 ni80 single coil ~0.20 ohm with a VTC5A:
Here is an old pic of it:
And the deck in case you have never seen it:
Today's setup is the Athena kit built with a coilology tri-core fused clapton 3-26/36 ni80 single coil ~0.20 ohm with a VTC5A:
I can see how you make the connection. The airflow looks pretty similar. That Athena is such a nice looking rig, too.
yeah, the airflow slots are eerily similar if you dont look at the logo or deck.
I love my athena mod and even the RDA. The Athena is a great bit of kit and it totally hooked me on squonking. I think it hits harder than my pulse mods (which is odd as I think it has more voltage drop than the pulse, IIRC) and the safety switch is much more convenient if I want to pocket carry it on the go. The only real down sides for me are the door slop and the sharp corners.
Where did you get the cap/dt? That is the only reason I benched my combo. Loved the flavor but the dt was awful for me and a custom cap was more than I wanted to spend at the time. Yours looks perfect for me with a dual build.
Stock cap on the Combo, I used this TFV8 drip tip which fits perfectly.
Mine came from 3F but they are discontinued there, FT still has them.
$2.06 Stainless Steel + Resin Hybrid Wide Bore Drip Tip - for Smoktech TFV8 clearomizer/KENNEDY/Complyfe Battle atomizer at FastTech - Worldwide Free Shipping
I might have to get a few of these ones in, I like the hex design and they are 2mm taller.
$2.91 Resin + Stainless Steel Hybrid Wide Bore Drip Tip - for SMOK TFV8 clearomizer / random grain at FastTech - Worldwide Free Shipping
Any TFV8 tip will work, but it has to have an o-ring or two.
None of my 810 dt fit, with or without o-rings. Put one of each in the cart. Worth a few bucks to check it out.Stock cap on the Combo, I used this TFV8 drip tip which fits perfectly.
Mine came from 3F but they are discontinued there, FT still has them.
$2.06 Stainless Steel + Resin Hybrid Wide Bore Drip Tip - for Smoktech TFV8 clearomizer/KENNEDY/Complyfe Battle atomizer at FastTech - Worldwide Free Shipping
I might have to get a few of these ones in, I like the hex design and they are 2mm taller.
$2.91 Resin + Stainless Steel Hybrid Wide Bore Drip Tip - for SMOK TFV8 clearomizer / random grain at FastTech - Worldwide Free Shipping
Any TFV8 tip will work, but it has to have an o-ring or two.
While searching for that DT I found out I have not bought anything from FT in a year.... The Horror!
This is the stock Combo RDTA top cap and these tips fit snug. It would not be the first time iJoy pulled a top cap switcheroo like they did with the Limitless Plus. iJoy is fully versed in and basically wrote the book on douchery.
Thanks for the close up. My top cap does not look like that.While searching for that DT I found out I have not bought anything from FT in a year.... The Horror!
This is the stock Combo RDTA top cap and these tips fit snug. It would not be the first time iJoy pulled a top cap switcheroo like they did with the Limitless Plus. iJoy is fully versed in and basically wrote the book on douchery.
View attachment 725787
I came across an old rda the other day, not sure what it is (old Baal maybe) maybe the chuff cap will fit. Did remember when I found it I loved the chuff. Only reason I kept it. Not a fan of 3 post decks, velocity style saved dripping for me.
Nothing like the V2 Aromamizer! Love them and still roll with themSSDD - same setup different day
paper beats rock
My mutt
Six 3mm wraps of 24g SS430 with Sally's 100% rayon,
I used five 3.5mm wraps for a while but the chamber was just too stuffed.
42j or 46j @ 408° or 45W-50W if the coils are cruddy
V2 drilled to #28, countersunk and hand deburred.
Last edited:
@chanelvaps - I think the Trinity Glass tanks look killer on it too.
@TrollDragon - still on sale. Now that's a deal of the day
Aromamizer X Pyrex Glass Tank - I bought about 10 of them last year
hmm, I just put 1000 in my cart and it didn't complain so either their cart system sucks or they'll have these in stock for quite a while.
@TrollDragon - still on sale. Now that's a deal of the day
Aromamizer X Pyrex Glass Tank - I bought about 10 of them last year
hmm, I just put 1000 in my cart and it didn't complain so either their cart system sucks or they'll have these in stock for quite a while.
Last edited:
They must have a ton of them...@chanelvaps - I think the Trinity Glass tanks look killer on it too.
@TrollDragon - still on sale. Now that's a deal of the day
Aromamizer X Pyrex Glass Tank - I bought about 10 of them last year
hmm, I just put 1000 in my cart and it didn't complain so either their cart system sucks or they'll have these in stock for quite a while.
It's a gorgeous tank, I've put mine aside for a bit until I'm done playing with the Titan. I want to try rotating the positive post on the V2 and do that single big vertical build.
@chanelvaps - I think the Trinity Glass tanks look killer on it too.
@TrollDragon - still on sale. Now that's a deal of the day
Aromamizer X Pyrex Glass Tank - I bought about 10 of them last year
hmm, I just put 1000 in my cart and it didn't complain so either their cart system sucks or they'll have these in stock for quite a while.
Can you use the trinity glass on the v3
Sent from my iPad using Tapatalk
Similar threads
- Locked
