Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
I like your look better, what did you use to fill.
Nail varnish, leave it around 7 mins then use rubbing alcohol and a paper towel to clean it up, it's especially effective on the limited edition DB
20200605_145908.jpg
 

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
Boreas from 2016 fits 3mm 3x core Claptons with room to spare.
Needs more wick than a top air tank to prevent leaking at AFC.
Handles chain vaping at 100W but it's roasty toasty
1f525.png

128797489_2886271768270301_7445628056518321356_o.jpg
Boreas from Roxy. I still have two myself and a very sought after custom one.
IMG_20170911_120346.jpg
 

Javichu

Account closed on request
ECF Veteran
Mar 8, 2020
3,084
17,829
50
Spain
Hey ;)

I'm using a 3mm ID Clapton but its thin gauge wire so the ramp up is quick. Always ohm's out at 0.32. Fantastic vape at 35w
View attachment 920103
View attachment 920107

thanks for the detailed info buddy.
Out of curiosity,have you tried the OFRF Gear RTA with a lower ohm coil?
Had a 0.32ohm in it when i first tried it and still a bit hot for my preference of vaping.
 
  • Like
Reactions: cocy c

Superuser187

Ultra Member
ECF Veteran
Aug 10, 2020
1,524
3,217
38
Athens
thanks for the detailed info buddy.
Out of curiosity,have you tried the OFRF Gear RTA with a lower ohm coil?
Had a 0.32ohm in it when i first tried it and still a bit hot for my preference of vaping.

Try kanthal :p I mean according to my experience and to the coil calculators it has less heat flux...am I right?? Or not?
 
Last edited:

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
thanks for the detailed info buddy.
Out of curiosity,have you tried the OFRF Gear RTA with a lower ohm coil?
Had a 0.32ohm in it when i first tried it and still a bit hot for my preference of vaping.
No because it may seem a bit low in ohm's and the picture makes it look like a chunky coil but it's really not, it doesn't get hot and it's a cool vape, they work so well as a single or dual coil, they are all I have used for over 2 years. They don't spit either. If I couldn't get these coils, I'd use a fused Clapton in there around 0.4 / 0.5ohms...
If you haven't already tried - The Aromamizer Supreme V3 with the new single coil deck is a great vape, totally different atty though to the small stumpy gear.
 

Javichu

Account closed on request
ECF Veteran
Mar 8, 2020
3,084
17,829
50
Spain
No because it may seem a bit low in ohm's and the picture makes it look like a chunky coil but it's really not, it doesn't get hot and it's a cool vape, they work so well as a single or dual coil, they are all I have used for over 2 years. They don't spit either. If I couldn't get these coils, I'd use a fused Clapton in there around 0.4 / 0.5ohms...
If you haven't already tried - The Aromamizer Supreme V3 with the new single coil deck is a great vape, totally different atty though to the small stumpy gear.

Ok will do.
Next time i do some vape shopping i'll see if i can get those coils you first mentioned and see how it goes.

cheers
 

Aliraonz

Ultra Member
ECF Veteran
Feb 26, 2020
1,438
6,477
New Zealand
thanks for the detailed info buddy.
Out of curiosity,have you tried the OFRF Gear RTA with a lower ohm coil?
Had a 0.32ohm in it when i first tried it and still a bit hot for my preference of vaping.

You can ask @AngeNZ too I believe she is also an expert on the Gear specially with kanthal and smaller ID coils (If I'm not wrong) ;). You can never go wrong with more options :)
 

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
Is that the Juggerknot V2 RTA 28mm?
By the size i'm guessing it's a dual coil atty right? Not a fan of duals but i love the looks of that atty.

cheers
Yeah it's Jug 2 ha and yes, dual coil. It's absolutely fantastic. Im really enjoying this one :thumb:
 

Users who are viewing this thread