Precise ELA Telescoping Mod by Super-T!

Status
Not open for further replies.

Symbolik

Senior Member
ECF Veteran
Verified Member
Apr 8, 2013
148
174
32
Cali
I need help, super T fam, I am hunting a polished SS top accent ring for my ELA. I never got one when I bought mine off of here on ECF and bow that I've been getting more accessories for my ELA it just seems incomplete without this. So of anyone has some spares please pm me!

Sent from my HTC6500LVW using Tapatalk
 

jkim5708

Super Member
ECF Veteran
Verified Member
Dec 17, 2012
323
517
So Cali
Oh my goodness!
This message was sent to you at the request of Super T, to notify you that they have shipped a package to you. For details about your shipment or to track your package, please refer to the information below.

R u sure it's not top caps. I got same email. At this moment I'm numb to all the shipping notices and usps or fedex for that matter. Till it's in my hands I will not put anymore energy or emotion into them.


Sent from iPhone Evolved
 

Symbolik

Senior Member
ECF Veteran
Verified Member
Apr 8, 2013
148
174
32
Cali
Wow, I hope you can find one, it seems odd that the person you bought it from did not send it to you complete. If i were you , Id contact the seller and ask them why they did not send you a complete unit, unless of course they described it as missing the top accent.

I'll give it a shot. When I received it in the mail he and asked him about it, he was a little dodgy

Sent from my HTC6500LVW using Tapatalk
 

Magic Dragon Puff

Super Member
ECF Veteran
Jun 29, 2013
600
714
Scotts Valley, CA, USA
R u sure it's not top caps. I got same email. At this moment I'm numb to all the shipping notices and usps or fedex for that matter. Till it's in my hands I will not put anymore energy or emotion into them.


Sent from iPhone Evolved

Yes, the only outstanding Super-T order I have is the ELA - all this means is it's on the finishing bench.
I'm not expecting anything soon, only that I'm in the queue for David's final massage.

Take out those kinks David and maker her feel like the royalty that she is!
 

Magic Dragon Puff

Super Member
ECF Veteran
Jun 29, 2013
600
714
Scotts Valley, CA, USA
A childish mind is what keeps us from becoming "old farts"
Yes, but to fully appreciate that perpetual youthfulness, we need to do 3 simple things -
AND I want everybody who is 55 or older to do this with me right now ...

1. Grab a small metal pot from the kitchen
2. Put a blindfold on using a clean dish towel
3. SLOWLY grope your way around the house and break every damn mirror with the pot
 

Cucco

Vaping Master
ECF Veteran
Apr 9, 2013
3,817
12,462
Bonita Springs, Florida, USA
Heck I'm still dreaming of an extension tube for mine. One day Santa Clause ask David will come through. I check the magic Super T North Pole every day.
OMG I did just post that. Ok a big kid at heart, just not body. :facepalm:

I hope you get one soon. :( I'll grab you one, if I see them.
 

Cucco

Vaping Master
ECF Veteran
Apr 9, 2013
3,817
12,462
Bonita Springs, Florida, USA
Sorry I haven't been home since Sunday did everyone receive their top caps already. If so... Hmm my top caps are waiting. What was the my most recent shipping notice for? I lied. Emotionally involved I think I'm getting ela soon. Omg. I needs the ela b4 I go crazy !


Sent from iPhone Evolved

No top caps yet. They are on the way. :)
 

Mondo

Full Member
Verified Member
Jul 25, 2012
35
25
SC
Sorry I haven't been home since Sunday did everyone receive their top caps already. If so... Hmm my top caps are waiting. What was the my most recent shipping notice for? I lied. Emotionally involved I think I'm getting ela soon. Omg. I needs the ela b4 I go crazy !


Sent from iPhone Evolved

According to USPS - Out for delivery today. I got the shipping notice from Super T on the 24th, which I assume was when work began on my 'batch', as he usually does. The actual shipping was on the 28th.

Hang in there, it won't be long now.
 

vaptamist

Vaping Master
ECF Veteran
Verified Member
Oct 14, 2011
3,447
6,530
FL
OK, I got my solid top caps in today. Am I missing something obvious here? They each came with a tiny o-ring that I'm not sure what to do with. When I screw my adjustable post in, it seems to bottom out way shallower than my normal flat cap, and it doesn't go deep enough to make contact with my atomizer I'm putting on (usually I screw my atomizer in, and then screw the adjustable post in until it makes solid contact).

On top of that, if I then put the extension tube with the solid top cap/adjustable post in to my ELA with an 18350 battery, it has a noticeable gap (3mm or so) between the knurled locking ring and the bottom of the top cap. I can tell the battery is bottoming out and then the adjustable post is sitting on top of the battery.

I'm thinking I'm doing something wrong, and not using the adjustable post correctly with the new cap - and I think the likely culprit is the o-ring. Anyone else have theirs yet and can shed some light? I did have a long day at work, so my problem solving skills are pretty much kaput at this point.

Side note: They both look outstanding.
 

Cucco

Vaping Master
ECF Veteran
Apr 9, 2013
3,817
12,462
Bonita Springs, Florida, USA
OK, I got my solid top caps in today. Am I missing something obvious here? They each came with a tiny o-ring that I'm not sure what to do with. When I screw my adjustable post in, it seems to bottom out way shallower than my normal flat cap, and it doesn't go deep enough to make contact with my atomizer I'm putting on (usually I screw my atomizer in, and then screw the adjustable post in until it makes solid contact).

On top of that, if I then put the extension tube with the solid top cap/adjustable post in to my ELA with an 18350 battery, it has a noticeable gap (3mm or so) between the knurled locking ring and the bottom of the top cap. I can tell the battery is bottoming out and then the adjustable post is sitting on top of the battery.

I'm thinking I'm doing something wrong, and not using the adjustable post correctly with the new cap - and I think the likely culprit is the o-ring. Anyone else have theirs yet and can shed some light? I did have a long day at work, so my problem solving skills are pretty much kaput at this point.

Side note: They both look outstanding.

My top caps came in. As usual, well machined Super-T treasures. If vaptamist is having an issue, then I don't think I will even attempt to put mine on yet. Somebody, please chime in here. Good luck vaptamist! :)
 
OK, I got my solid top caps in today. Am I missing something obvious here? They each came with a tiny o-ring that I'm not sure what to do with. When I screw my adjustable post in, it seems to bottom out way shallower than my normal flat cap, and it doesn't go deep enough to make contact with my atomizer I'm putting on (usually I screw my atomizer in, and then screw the adjustable post in until it makes solid contact).

On top of that, if I then put the extension tube with the solid top cap/adjustable post in to my ELA with an 18350 battery, it has a noticeable gap (3mm or so) between the knurled locking ring and the bottom of the top cap. I can tell the battery is bottoming out and then the adjustable post is sitting on top of the battery.

I'm thinking I'm doing something wrong, and not using the adjustable post correctly with the new cap - and I think the likely culprit is the o-ring. Anyone else have theirs yet and can shed some light? I did have a long day at work, so my problem solving skills are pretty much kaput at this point.

Side note: They both look outstanding.

The oring is a replacement for the adjustable post one, figured peoples might be a bit worn. I just re-measured all the specs, they are identical to your adjustable draw ones, so I'm not sure why it wouldn't be working. Is there something maybe just down in there or on the adjustable post not allowing it to screw in all the way?
 
Status
Not open for further replies.

Users who are viewing this thread