Random DIY mixing and More

[uthinkofsomething]

I got a couple of those cheap Kamry K100s. Am I right in thinking I can use them with any 510 atty? If they only work with the cartomizers they come with, they're going to be living at the very bottom of the stash pile.

The Kamry has the older style connector, it's 510 and ........ I forget. Threaded inside and out.

 

[Zazie]

The Kamry hSoas the older style connector, it's 510 and ........ I forget. Threaded inside and out.

So does that means a standard modern atty won't work? I'd stick one on to check, but I'm nervous because it's a mech.

 

[NGAHaze]

So does that means a standard modern atty won't work? I'd stick one on to check, but I'm nervous because it's a mech.

Yes, you can use any atty on it. It is a mech so there's no protection so I do recommend checking the atty first on a regulated mod however.

 

[uthinkofsomething]

So does that means a standard modern atty won't work? I'd stick one on to check, but I'm nervous because it's a mech.

I've never used a mech, so I am the last to give any real advice. A standard 510 atty should still work though.

 

[barkfunklerbunk]

Hope you are all well, and having a good day.

 

[NolaMel]

Hope you are all well, and having a good day.

And you as well!!

 

[rosesense]

The Kamry has the older style connector, it's 510 and ........ I forget. Threaded inside and out.

It is 510 and Ego threaded, if I remember correctly.

From element:
With 510 threading, you can attach almost any cartomizer, clearomizer, or atomizer with this amazing device.

 

[Skeebo]

Same happened to me with my order from them. Ordered Friday, nothing but label printed until yesterday. But this am, USPS tracking showed out for delivery to me today. I just checked, and it shows delivered. Maybe the guy that does their pickups is lousy at scanning everything in or something.

That's probably the case. I ordered from Giant Vapes for many years. Most of the time I would get a notification that the label had been printed and then it would sit there for two days (seemingly). Then it would show delivery to mailbox. I know my post office is terrible about scanning received packages. If it comes through Clearwater instead of Tampa I won't know it till it is scanned delivered.

 

[uthinkofsomething]

It is 510 and Ego threaded, if I remember correctly.

From element:
With 510 threading, you can attach almost any cartomizer, clearomizer, or atomizer with this amazing device.

I thought it was an ego connection, but it didn't feel right saying it Been so long since I've had a device with that.

 

[FranC]

Hope you are all well, and having a good day.

I hope you are as well

 

[DavidOck]

I got a couple of those cheap Kamry K100s. Am I right in thinking I can use them with any 510 atty? If they only work with the cartomizers they come with, they're going to be living at the very bottom of the stash pile.

The Kamry has the older style connector, it's 510 and ........ I forget. Threaded inside and out.

Yep, 510 and Ego. So if you have a mess of, say, Kanger T3S, they'll spin right on. The Kamry will take a fuse, but won't go open enough for a Kick.

 

[Zazie]

I don't know enough about older stuff to know whether this means a modern atomizer will or won't work with the Kamry.

 

[FranC]

20% off replacement coils at ejuices.com with code SEPCOILS20 til tonight

 

[PapawBrett]

Mech user (REOS) for years. You HAVE to do an ohms check. From one coil post to the other, or from the center pin (fire pin) and the body of the atomizer. Your Ohms should hold steady for there or four seconds. If they fluctuate, there is a loose connection. If there is no Ohms reading, it's broken. If it reads Zero, there is a short.
Mechs work great as long as you set them up properly.

 

[rosesense]

I don't know enough about older stuff to know whether this means a modern atomizer will or won't work with the Kamry.

Anything 510 should work. Just be careful of your builds, if you build too low, could be trouble since there is no protection. Your zeniths/zlides should be fine with the 1.6 ohm coil.

 

[hittman]

I ordered two of the kamry mech mods that were supposed to come with fuses but didn’t get any. I emailed them about it at vapenw.

 

[rosesense]

That is a bummer, Hitt. Let us know what they say. If you can't get any fuses, I could send you one as soon as I find them.

 

[FranC]

I ordered two of the kamry mech mods that were supposed to come with fuses but didn’t get any. I emailed them about it at vapenw.

Always a PITA when you don't get what you should

 

[rosesense]

More states are talking about bans. Eeek, we are going downhill fast.

 

[FranC]

More states are talking about bans. Eeek, we are going downhill fast.

Yeah, we are