Afternoon Cappy and Crew!...I got my catch cup today...thank you Cappy!..
that was really quick service!...much appreciated...
that was really quick service!...much appreciated...
Red Sky Mods
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
Afternoon Cappy and Crew!...I got my catch cup today...thank you Cappy!..
that was really quick service!...much appreciated...
Aye, you be more than welcome lass. Looking forward to pics when it is finished
Aye, you be more than welcome lass. Looking forward to pics when it is finished
you might be sorry you asked for pics...
I did in my Precise P18 and I was disappointed. They don't last long at all and they felt like they were not holding stable long at all. I didn't check often but my voltages ranges from 4.3v to 4.9v. -Magnus
Pardon, I'm new to the thread.... I've been looking for a bottom-fed Vv wood box mod and this one escaped my view until just a few minutes ago. I think I'm looking for the Mark-V Cutlass, yes?
What are the components and materials used beside the wood? SS?
Custom wood requests OK or is it batch posts and first-come first-served?
Some pictures looked like there was a bigger catch-cup affixed but others don't?
510 connector options for the bottom-feeder?
Bear with me while I get up to speed. A lot of pages to cover. -Magnus
What are the components and materials used beside the wood? SS?
Custom wood requests OK or is it batch posts and first-come first-served?
Some pictures looked like there was a bigger catch-cup affixed but others don't?
510 connector options for the bottom-feeder?
Bear with me while I get up to speed. A lot of pages to cover. -Magnus
Hi magnus! i can only answer a few of your questions, as my first one is in this batch.
1. 510 connector-check
2. new bigger catch cup just started with this first edition of the cutlass edition
3. i believe he would rather put up the batch and then first come/first serve. they will all be up on a website too, but if you really want one before the masses, i'd pm him.
1. 510 connector-check
2. new bigger catch cup just started with this first edition of the cutlass edition
3. i believe he would rather put up the batch and then first come/first serve. they will all be up on a website too, but if you really want one before the masses, i'd pm him.
Mangus, the shiny are SS catch cups. Cappy will have to say on the black ones. Two sizes; smaller for 510 & sim, larger for 801 & sim. No catch cups are tilt & shoot rather than stand & shoot models. Info about each in on his website.
510 has been the only connection I have seen to date.
Custom orders? You must ask him. Many have flaked I suggested non-refundable deposits to stop this but I doubt he will. He is a super nice guy.
Welcome aboard!
510 has been the only connection I have seen to date.
Custom orders? You must ask him. Many have flaked
I suggested non-refundable deposits to stop this but I doubt he will. He is a super nice guy.Welcome aboard!
and yes, you could just get a dripper
Yep, there will be some DC cartos with tanks involved on that dripper though.
That said, the attention to detail and craftsmanship Brian puts into his work is pretty amazing.
Last edited:
Hiya, some questions were covered already, but I will take them all again
The current build is for the Mark-V / Cutlass model. It is a 18350x2 mod, linear regulated VV. 6ml feed bottle with voltage display and kill switch built into the base of the unit.
1. Besides the wood, I am using SS switches and Catch Cups. I am only using the larger catch cups now as they will accept any sized atty or carto anyone wishes to use. I will mount a smaller CC for 510 only size by request. The Cutlass uses a 6ml feed bottle with a SS feed tube. All mods get a CC but they can be upright feeders or Tilt & shoot, users choice.
2. Batch post and first to claim a mod gets it. I do occasionally take requests by friends of the thread for custom jobs.
3. I use 510 connectors as the majority of vapers use them, I could do other types but would need to order them except for 801s.
Hiya, some questions were covered already, but I will take them all again
The current build is for the Mark-V / Cutlass model. It is a 18350x2 mod, linear regulated VV. 6ml feed bottle with voltage display and kill switch built into the base of the unit.
1. Besides the wood, I am using SS switches and Catch Cups. I am only using the larger catch cups now as they will accept any sized atty or carto anyone wishes to use. I will mount a smaller CC for 510 only size by request. The Cutlass uses a 6ml feed bottle with a SS feed tube. All mods get a CC but they can be upright feeders or Tilt & shoot, users choice.
2. Batch post and first to claim a mod gets it. I do occasionally take requests by friends of the thread for custom jobs.
3. I use 510 connectors as the majority of vapers use them, I could do other types but would need to order them except for 801s.
Alright.. sounds good. I guess I'll keep watching the thread for one that fits or a drunken post about taking custom orders now. ;-)
Thanks much, your answers were perfect and thorough. -Magnus
Bumping to top with new pics of unclaimed ones
#501, #504, #502
The first 7 of this batch are now complete and passed testing. Now it's just getting the finish complete and away they go, yo ho!
501 - Reserved -$195 - Black & White Ebony, Leopard wood ends - Semi-round octagon shape, gentle contour
502 - $189 - Macassar Ebony, Zebra wood ends - Rounded, beveled edges on end cap sides
503 - Reserved -$169 - Purpleheart, Mulberry ends - Semi-rounded octagon shape, gentle contour
504 - $169 -Granadillo, Honduran mahogany ends - Rounded, beveled edges on end cap sides
505 - Reserved -$175 - Marblewood, Caribbean Rosewood ends- Rounded, beveled edges on end caps
506 - Reserved -$189 - Ziricote, Mountain lauren ends - Semi-rounded octagon shape, gentle contour
#501, #504, #502
The first 7 of this batch are now complete and passed testing. Now it's just getting the finish complete and away they go, yo ho!
Last edited:
Do they make a 801 connector thats tall? The only ones I have used sit flush and the way the 801 atty slips down over the battery made it so I had to tear the metal collar off the atty to get it to screw down all the way. I will look around and see if other styles are available.
I have not had a native 801 yet so I don't know. If it's a PITA, don't bother. Thus far (knock on wood) I have had no problems using my stealth adapter on many devices. Just thought it would be nice since I am an 801 girl
Well, I picked one up at random, its now 4.14" tall, with the LED mounted inside the bottom end cap, 2.4" wide and 1.05" thick.
Alright... since I can't do custom w/o a reputation (carrying a nice firearm just doesn't get you as far now'a'days), can somebody tell me about the build quality on these? Tight fit hold or is there a magnet? And how they feel in the hand? I only found the Mark III Youtube reviews.
What is the hardware on 502? Or does it come in SS parts too? I'll always take SS. I think that's the one of this lot I'd take if I can't do custom.
Any thread gurus or existing customers have anything you want me to know before I decide? ;-)
And ordering and payment process? On my mobile the website shows a PayPal logo but I can't find a cart or item list. -Magnus
What is the hardware on 502? Or does it come in SS parts too? I'll always take SS. I think that's the one of this lot I'd take if I can't do custom.
Any thread gurus or existing customers have anything you want me to know before I decide? ;-)
And ordering and payment process? On my mobile the website shows a PayPal logo but I can't find a cart or item list. -Magnus
pm brian Magnus or i may steer you wrong.that might be nickel plated. if you pm and reserve it he will invoice ya when they are done.they are days away from finish ,so they havent made it to the web site yet
- Status
Similar threads
