I don't know?? Maybe cappy will chime in. Description by the pic says VV Mahogany/Bloodwood/Obsidian
Red Sky Mods
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
I don't know?? Maybe cappy will chime in. Description by the pic says VV Mahogany/Bloodwood/Obsidian
Yup, its a Buccaneer and it has a edging style I experimented with on a couple mods but is not standard.
Ok, I think I will take pre-orders again, it worked pretty well before so time to start thinking about the next batch.
Select one from each picture and you have made all the necessary choices. The skull stamp indicates it is not available.
The small catch cup is for 510 atomizer sizes, the larger one can accommodate Cannons or whatever.
All VV mods now use a 25W 3Amp adjustable switching regulator.
http://www.dimensionengineering.com/datasheets/DE-SWADJ3.pdf
Base Price; (Add additional cost of wood selected as indicated on the picture)
3.7V model - $119
3.7V with Voltage Display - $139
VV model - $159
VV with Voltage Display - $179
The Cutlass VV Voltage Display models also have a dual function switch installed.
Position 1 - Checks voltage at atomizer / operating position
Position 2 - Checks battery voltage / Safety off
Main Body wood
End Cap wood
Catch Cup - Small / Large - Switch - Nickel Plated / Stainless Steel / Gloss Black
Rounded
Soft Octagon 
Select one from each picture and you have made all the necessary choices. The skull stamp indicates it is not available.
The small catch cup is for 510 atomizer sizes, the larger one can accommodate Cannons or whatever.
All VV mods now use a 25W 3Amp adjustable switching regulator.
http://www.dimensionengineering.com/datasheets/DE-SWADJ3.pdf
Base Price; (Add additional cost of wood selected as indicated on the picture)
3.7V model - $119
3.7V with Voltage Display - $139
VV model - $159
VV with Voltage Display - $179
The Cutlass VV Voltage Display models also have a dual function switch installed.
Position 1 - Checks voltage at atomizer / operating position
Position 2 - Checks battery voltage / Safety off
Main Body wood
End Cap wood
Catch Cup - Small / Large - Switch - Nickel Plated / Stainless Steel / Gloss Black
Rounded
Soft Octagon 
Last edited:
Ok, you all have been patient, here is some Cutlass Porn and the 3.7V Ziricote; Sanding is complete and they have had their first coat of finish.
Click on pic for expanded view
Click on pic for expanded view
Aye Lass, I did use your rounded end as an example, truly I did, arrrr!
I'm surfing the site, minding my own business reading about nutela juice and you show this?
What is a man to do?
Outstanding figure. Curvacious grain, moist lines. We're only mortal!
What is a man to do?
Outstanding figure. Curvacious grain, moist lines. We're only mortal!
Ok, you all have been patient, here is some Cutlass Porn and the 3.7V Ziricote; Sanding is complete and they have had their first coat of finish.
Click on pic for expanded view
Curvacious grain? Moist lines? Gives 'Hand rubbed' finish a whole new depth methinks, arrrr.. and it's not even a friday night!
Oh my.......it's only Tuesday. But wait, why would that matter.
Wow... getting prettier and darker now.
That Ziricote one looks amazing. And the other two looks even better too.
I'm actually starting to regret my end cap choice a little...
It made it look like a chocolate bar.
But I still like it!
How does the two digit LED work? Is it like 37 for 3.7v etc?
That Ziricote one looks amazing. And the other two looks even better too.
I'm actually starting to regret my end cap choice a little...
It made it look like a chocolate bar.
But I still like it!
How does the two digit LED work? Is it like 37 for 3.7v etc?
Last edited:
Gee that one on the far left sure is pretty don't y'all think?
It is indeed, but not quite as pretty as the one next to it! : )
They look amazing Cappy! Don't wanna wait anymore!
Wow... getting prettier and darker now.
That Ziricote one looks amazing. And the other two looks even better too.
I'm actually starting to regret my end cap choice a little...
It made it look like a chocolate bar.
But I still like it!
I think your combo is really nice looking. Not like a chocolate bar at all! Once you see it in person, you'll love it I bet!
Arrr, did a bit of touch up sanding (cant really see flaws in the wood until it gets a coat of finish) and put on another coat of finish, they are starting to look great!
I dunno Chet, I think it looks awesome, but I have the thing right here to look at not just a picture to judge
I dunno Chet, I think it looks awesome, but I have the thing right here to look at not just a picture to judge
It's actually the same 3 digit LED everyone else uses, but the first digit is not used so I just cut the opening to show the last two digits. It would read 3.7 volts.
OMG....thats wrong ...isnt it .... good grief....... goooodd grief.... and %$@%^
yep that extra digit doesn't light up anyway unless you gonna be vaping 10 volts or above.
The ziricote is really beautiful. It didn't look like much in the original pictures (where you choose one) but it is really nice! If I do another, it might have to be with that.
- Status
Similar threads
