Enough flavour to last a life time here lol an 30 liters vg/ pg liquids too [emoji23][emoji23]
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
Replacing the 510 in an RX200... Fairly easy actually.
- Thread starter EverPresentNoob
- Start date
- th_trl_thread_readers 0
- Status
And that's only some of them , I have nearly 1000£ worth of concentrates got 3 boxes at my misses too
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
We deemed to of gone off track ,this is supposed to be about 510 repair replacement lol , not who's got the biggest [emoji23]lol
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
@benley73
We can tell you found this thread very helpful with your RX200 510 issues. The pictures and advice was pretty much on topic. As a relatively new member, there are currently 608,571 discussions on this site. You can create your own, about your own topics. The majority of what your're posting has nothing to do with Replacing the 510 in an RX200.
TLDR: LET'S STAY ON TOPIC.
We can tell you found this thread very helpful with your RX200 510 issues. The pictures and advice was pretty much on topic. As a relatively new member, there are currently 608,571 discussions on this site. You can create your own, about your own topics. The majority of what your're posting has nothing to do with Replacing the 510 in an RX200.
TLDR: LET'S STAY ON TOPIC.
Sent from my ONEPLUS A3003 using Tapatalk[/QUOTE]
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk[/QUOTE]
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
First off, thank you for taking my post as informative, and not insulting in any manner. We're all good.
I don't know how you can remove them, perhaps ask a moderator with the post numbers you wish removed.
Cheers, and have a good one.
is there any one in uk that can do the soldering , for me to install a new board into this empty shell so i can get use out of the rx 200s mod with a decent 510 installed any help be greatfully appreciated an your time work ect be paid for , thanks
i understand this sorry , if i could remove them i would i will see if a mod can help remove i did go off trackFirst off, thank you for taking my post as informative, and not insulting in any manner. We're all good.
I don't know how you can remove them, perhaps ask a moderator with the post numbers you wish removed.
Cheers, and have a good one.
I could have a go at soldering but I already know I'm not good at it too shaky , so I know now I would mess up something an that's not something I would want to do , I'm on with the stripping it down , boring out the hole / drilling an such , fitting the 510 , but don't want to trying soldering on such delicate boards an tiny wires without any soldering experience , be a bit naive of me to do so ,thanks
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
Suggestions I have seen is to hunt down a hobby shop, or an rc car/plane shop as they are tinkering with gear that needs soldering. While they're in there you may as well ask the to rewire with beefier silicone wires.
Thank you for quick reply these are dwindling around my area ,as a child they where everywhere, but now you can't even find a radio shack , I will keep my eye out ,but we now live in a throw away nation ,looks like I will try an learn to start soldering ,
I'm looking now for PC or phone repairs they will have knowledge or can do soldering so might help
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
What's the best type of wires to ask for , what am I looking for , what gauge ect ,would be best suited I ask for or for me to buy for it , thanks
Sent from my ONEPLUS A3003 using Tapatalk
I'm no electronic expert ,my stuff is pipe works the gas mains water mains ect in the roads like 25 inch high pressure gas mains working on live gas an services ect, so I got some engineering background with electro fusion ect on service pipes , but not with little electronics an wires that was my old trade
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
Silicone would be a good choice as far as insulators go, but to be honest I would be more worried about the actual wire material.
I would bet money that the wire used in the mod is copper clad aluminum. Replacing it with pure copper wire, or even better silver wire would increase the efficiency of the circuit and also make the ohm reading from the atomizer more accurate. Temperature Control would work a little better and you may be able to reduce the wattage slightly and still get the same result.
It wouldn't make a big difference because the wires are so short, but when we are talking about TC reading resistance changes as little as .01 ohms, every little bit makes a difference.
One of the wires off the old base is sliver wire I looked at it the small blk one at front I'm sure it's silver
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
But this is on the S mod so maybe they changed some of the wires I don't know ,so either silica wire or silver wire would be better replacement to be used , is there a certain gauge to be aiming for , just so we know what to ask if any of the PC or phone repair shop would undertake this for me
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
- Status
