Serpent RTA by WOTOFO
- Thread starter nelsonm64
- Start date
- th_trl_thread_readers 0
- Status
J-cotton. It's a big coil so there's a good bit of it. It's just fluffed out and trimmed, hardly thinned at all. One nice thing about the Serpent deck is you can spread the wick ends out rather than crowding them around the juice channels. That gives you a hell of a lot of juice capacitance in the wick.
No, it doesn't swell like cotton, and you have to use more. A lot of people here are better at Rayon than I am. Maybe someone will chime in on the fluff challenge.
Have any of you seen that gearbest is having a flash sale on these. $18.99 for either SS or black. I ordered 2. Now to wait for the slow boat to get them here.
HD
HD
Your right about that... I ordered my first serpent from gearbest and it took 4 weeks to get here. Not a bad price if you don't mind the wait.
Sent from my iPhone using Tapatalk
I also have one on the way from eciggity. That way I can learn the quirks of these before the other 2 arrive.
HD
Heart, I dry burn and rewick for about 6-7 days and then change my Clapton out. I see a noticeable difference from the fresh coil when I first put it in. The nice thing is it is so easy to pop a new one in. I do vape NET tobacco juices so that is a little "harder" on the coil I guess. Even though the coil is working fine after a week, I believe the repeated dry burn process alters the surface of the wire and degrades the taste after a while. That could be pure imagination on my part though.
I use all my coils until they start looking crummy. And how quickly that happens seems very juice dependent. Some juice is just bad for coils.
However, I've put a SS coil in my Lemo now with NT Virus, a notorious coil wrecker, and the results are 100% better.
However, I've put a SS coil in my Lemo now with NT Virus, a notorious coil wrecker, and the results are 100% better.
Just took delivery of my serpent today with a new cuboid mod. Through in a quick .4 twisted coil about 6 wraps coming in at 0.46 ohms, wicked and running at 40w, nice flavour, good clouds, stupidly good airflow.
I can see this becoming my goto setup
So far so good, just got to get use to the juice flow control as this is my first RTA top fill and with juice flow control, didn't have it closed fully when I topped it up earlier so had juice coming out the air holes but a little trial and error and I am sure I will get it right
I can see this becoming my goto setup
So far so good, just got to get use to the juice flow control as this is my first RTA top fill and with juice flow control, didn't have it closed fully when I topped it up earlier so had juice coming out the air holes but a little trial and error and I am sure I will get it right
Hello. It's my first post here but I need some fast help.
Yesterday I was cleaning my Serpent for the first time and the SMALLEST o'ring felt down on the floor. I have no idea, where to put it back? Could you help me with that? I haven't got any user manual in the box, and can not find any in the internet. My serpent is legit, I've asked WOTOFO, but they didn't answer me.
I'm sorry for grammar mistakes.
Yesterday I was cleaning my Serpent for the first time and the SMALLEST o'ring felt down on the floor. I have no idea, where to put it back? Could you help me with that? I haven't got any user manual in the box, and can not find any in the internet. My serpent is legit, I've asked WOTOFO, but they didn't answer me.
I'm sorry for grammar mistakes.
It's probably the o ring from the underside of the top cap where you fill it
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I ment the tiny one. There's mid one underside the top cap. 
EDIT: I've looked in the spares. There're 4 sizes of translucent ones. Still mean the smallest one.
It fits underside of 510, but like I've said before - I was doing first dissassembly for cleaning when I've found it on the floor so I don't know the proper place for it.
EDIT: I've looked in the spares. There're 4 sizes of translucent ones. Still mean the smallest one.
It fits underside of 510, but like I've said before - I was doing first dissassembly for cleaning when I've found it on the floor so I don't know the proper place for it.
Last edited:
There's two under the top cap. The mid sized goes over the chimney section. The tiny one goes on the bottom of the top cap on the threads that screw into the chimney
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
So let's get a bit more precise on that tiny one that goes under head of the reverse threaded 510 screw, it's 1 x 1 mm.I ment the tiny one. There's mid one underside the top cap.
EDIT: I've looked in the spares. There're 4 sizes of translucent ones. Still mean the smallest one.
It fits underside of 510, but like I've said before - I was doing first dissassembly for cleaning when I've found it on the floor so I don't know the proper place for it.
I'm glad you figured out where it goes.
Edit: I have corrected the size used, I have been known to get sideways on occasion.
Last edited:
- Status
