Small single coil RDA

[vaper1960]

I do DIY e-juices and need a small rda to test flavors. Single coil will be fine (sometimes I re-wick between flavors) Because this is all I will use it for, don't want to spend much (as in "dirt cheap")

 

[Fredman1]

Fantastic little flavor banger rda. Single or dual coil. Get more than one...
$4.68 (Free Shipping) SR Origen Little Styled RDA Rebuildable Dripping Atomizer (Origen Little, SS, Silver (SR)) at m.FastTech.com

 

[Falconeer]

I certainly second Fredman 1's suggestion. Mine came as a squonk but with a solid 510 pin as well, and it truly is a great rta for flavour.

Internally it is small but not difficult to build as either a single or twin.

Some years ago I bought an original Origen Little ( for a lot of money!) loved it and used it until it got lost moving back to the UK from Spain - the clone is trully excellent IMHO.

 

[vaper1960]

That's certainly small (and cheap) but maybe a bit too small. They don't show a pic of the build deck... maybe I can find a video.
Anything else (just a bit larger)? By the way, I don't mind if it's "MTL" but like looser draw than other people. I also don't like crowded builds (will be using 3 mm ID claptons)

 

[vaper1960]

This looks good (but out of stock):
Boomstick Engineering Reaper | MTL RDA – VaporDNA
This one sure is odd (but cheap!):
$4.36 CH Styled MTL RDA Rebuildable Dripping Atomizer - 22mm diameter / stainless steel at FastTech - Free Shipping

 

[UncLeJunkLe]

They don't show a pic of the build deck

The link given above is to the mobile site so you have to click the ">" arrow to the right of the picture and it will page through the various pictures.

Or you can just use the non-mobile URL by removing the "m." from the URL.

https://fasttech.com/products/0/10008099/8816100-sr-origen-little-styled-rda-rebuildable-dripping

Don't forget...
1. Use CNYRAT10 for 10% off.
2. Rumors are circling that the Chinese govt has extended Chinese New Year holiday due to the Corona virus problem. May not be until end of March or later until you get it.

Anything else (just a bit larger)?

Maybe this

 

[vaper1960]

UJ, Thanks for the tip. I did look at the Berserker... not bad (and the clone is even cheaper)

 

[Skunk!]

This is one of my favorite
$18.66 (Free Shipping) Authentic GAS Mods Nova RDA Rebuildable Dripping Atomizer (Nova, SS, Black) at m.FastTech.com

 

[Falconeer]

@vaper1960 - here's a couple of quick shots of the origen Little clone and its build deck - the coil is a 0.7 Ohm and the wicking is a bit scruffy!

The pix being close ups are a bit larger than life.

Having had both the original and the clone, I cannot fault the clone and in fact the last clone I had's parts were 100% interchangeable with the original

 

[madstabber]

Go with a clone of one of the high end rda’s. Here is my favorite: $9.52 (Free Shipping) ST Krma Styled RDA Rebuildable Dripping Atomizer (SS, Black (ST)) at m.FastTech.com but there are a ton of good rda’s based off the design of these excellent high end rda’s. Find one you like and buy the clone. Here’s another one I like: $12.95 (Free Shipping) SXK Haku Venna Styled RDA Rebuildable Dripping Atomizer (316 SS, Silver (SXK)) at m.FastTech.com
Another that’s small: $10.98 (Free Shipping) SXK WICK'D Styled RDA Rebuildable Dripping Atomizer (316 SS, Silver (SXK)) at m.FastTech.com
Yet another: $17.90 (Free Shipping) SXK Hussar 2.0 Styled RDA Rebuildable Dripping Atomizer (2.0, 22mm, 316 SS, Silver (SXK)) at m.FastTech.com
You get the idea: $18.90 (Free Shipping) SXK AirLab RM Styled RDA Rebuildable Dripping Atomizer (RM, 316 SS, Silver (SXK)) at m.FastTech.com

 

[vaper1960]

@madstabber, thanks! That first one looks perfect. I was hoping to keep it around $10

 

[vaper1960]

If price was not an issue, I like this one:
An RDA For Vaping 24mm RDA by Coilturd, LLC
I watched a video and the guy said this was his favorite, then I saw the price and laughed (I mean cried) LOL

 

[vaper1960]

I meant to say I want that one for everyday vaping (and I know it's dual coil)

 

[UncLeJunkLe]

If price was not an issue, I like this one:
An RDA For Vaping 24mm RDA by Coilturd, LLC
I watched a video and the guy said this was his favorite, then I saw the price and laughed (I mean cried) LOL

Coilturd

 

[Vinnybagodoughnuts]

I have 2 KRMA clones.I like them but both leak around the topcap. Not sure why as the orings feel plenty tight.
Really like these as well. You have to remove one grub screw to build it but the flavor is fantastic.
$7.64 SXK NarEA Styled RDA Rebuildable Dripping Atomizer - 316 stainless steel / 22mm diameter at FastTech - Free Shipping

 

[vaper1960]

For just doing taste tests, I'm not too worried about leaking (I don't drip that much juice... just enough to get a quick idea of the flavor) I actually wick, drip, taste, then re-wick (with fairly short tails) I even use cheapo cotton balls (boiled and dried first) Once I taste and adjust flavor %, I try them in my little MTL tank (fill part way, vape awhile, dump, vape some unflavored, dump and so on) I know... my crazy methods but it works for me. I can also drip two flavors and taste the combo (with the RDA) Quick and dirty! I don't even vape the wick dry (sometimes they are 12 mg for MTL) because I get too much nic too quick.

 

[Dougiestyle]

Profile

 

[Blitzdonlife]

$8.70 Hadeon Entheon Styled BF RDA Rebuildable Dripping Atomizer - 304 stainless steel / 22mm diameter / w/ BF pin at FastTech - Free Shipping
I love the KRMA, but this one is my favorite squonking RDA so far.

 

[vaper1960]

@Blitzdonlife, thanks. Simple, deep juice well and I like the airflow (and price)

 

[madstabber]

@madstabber, thanks! That first one looks perfect. I was hoping to keep it around $10

That’s my favorite rda, when the authentic was coming out I loved the design. I seen the price and decided to try the clone out instead. Well my clone works flawless so I never had to but the original. It comes with the Squonk pin installed but there is a plug screw located in the base that turns it into a dripper. Turn the mod upside down and the screw on the bottom. Unscrew it and screw it into 510 to make a dripper, love that design so you don’t worry about losing a screw.