SMOKtech GotVapes Hyper SRT Rebuildable Tank Atomizer Available NOW - Coil & Wick in 4 ohm Choices From 1.7 to 5.0ohms Also Available

[AG51]

By the way you will find these in the same category where the complete tanks for these are sold...

Collect all nine, arrange them in a pyramid or even as bowling pins. Invent a game to knock them down or play BB beer pong. Stick one in each ear, both nostrils, four across your lips in your mouth, then balance the last one on your nose, take a picture and I will replace our beauty shot with your picture. Let's see, that about covers it...or you can just switch out your tubes on your Hyper SRT or 6ml DCT...

I would actually DO this for you Danno but I too 'Income Challenged' shall we say ? Okay truth is, I'm down right POOR, BROKE, NO MOOLA etc etc to purchase ALL of these at once to be your next glamor shot beauty queens
dam it, I'll never be famous

 

[harleydiva]

dam it, I'll never be famous

You are already famous.....

 

[Dieseler]

Is 50ft of Resistance Heater Wire, Kanthal A-1, 32 AWG 0.008", 0.20mm for $20 a good price or did i just rip myslf off? Got it off amazon, just copy paste if this is a good deal.

Where can i get ss mesh? Some one please link directly to a US supplier...

50 ft will last long time , on ebay i bought 200ft spool of Kanthal A-1, 32 gauge 0.20mm shipped for grand total - 12.95
but this person sells them out in the blink of an eye and i missed out last time but the stars were in alignment this time.
Did i mention these tanks are simple and awesome and i do no modification to them coupled with making my own coils and silica stranded wick.

 

[AG51]

You are already famous.....

View attachment 126960

I am ?

Oh, for being the crazy one rights ?

 

[timandolly]

For anybody having a problem with the thumbscrew I drilled the threads out of it so now it is only a spacer and this made it easier to get the wire from twisting around when tightening also I had a couple 3mm washers that I put 1 on top screw and 1 on bottom screw. makes tightening wire much easier

 

[dannoman]

Hmmmm....complete set on its way to you : P

I would actually DO this for you Danno but I too 'Income Challenged' shall we say ? Okay truth is, I'm down right POOR, BROKE, NO MOOLA etc etc to purchase ALL of these at once to be your next glamor shot beauty queens
dam it, I'll never be famous

 

[AG51]

Hmmmm....complete set on its way to you : P

uhhhh, I mean ut-oh

 

[me1969]

I would chip in to see that .

 

[me1969]

By the way you will find these in the same category where the complete tanks for these are sold...

Collect all nine, arrange them in a pyramid or even as bowling pins. Invent a game to knock them down or play BB beer pong. Stick one in each ear, both nostrils, four across your lips in your mouth, then balance the last one on your nose, take a picture and I will replace our beauty shot with your picture. Let's see, that about covers it...or you can just switch out your tubes on your Hyper SRT or 6ml DCT...

Just in case you forgot what you had to do .

 

[AG51]

I would chip in to see that .

Just in case you forgot what you had to do .

 

[YoMa!]

Both nostrils? Ouch! I'd have to skip that.

 

[harmonic]

Both nostrils? Ouch! I'd have to skip that.

naw you just need an adapter

 

[WallyO]

For anybody having a problem with the thumbscrew I drilled the threads out of it so now it is only a spacer and this made it easier to get the wire from twisting around when tightening also I had a couple 3mm washers that I put 1 on top screw and 1 on bottom screw. makes tightening wire much easier

That's what they should have done in the first place. Dunno what they were thinking.

 

[Adrena]

This I got to see.

 

[Robby]

got one of these and a bully on the way..plus a red pp tube to match my rocket..going to be some good vapemail.

 

[bombtrack311]

Could someone please explain to me how exactly to install a replacement coil and wick. I just bought a Vmax and a Hyper SRT tank from gotvapes.com

The VMAX works great with every cart and atomizer I've put in it. The hyper SRT worked really well for about 5 minutes when I noticed dry harsh hits. I watched the video on gotvapes explaining how to correct the problem, but but right after I tried to fix it there was pop and the thing completely stopped working. I didn't think this was a bug deal, because I bought several replacement coils and wicks for the Hyper SRT from Gotvapes.com... The only problem is I can't find an explanation for how to install the replacement coils they are selling anywhere on there website or smokteks website. I've scoured YouTube and this thread for an explanation, but I haven't found anyone who has explained exactly what to do. A couple other people have asked in this thread, but I haven't yet seen an explanation. Could someone please help me? I don't understand why there isn't an explanation for how to make a product work. No one created a manual of some sort?

 

[bombtrack311]

Please let me know if you got a response from someone. I've been looking all day for how to install the replacement wick and coil I bought. All I need is to know where everything is suppose to go.

 

[me1969]

Could someone please explain to me how exactly to install a replacement coil and wick. I just bought a Vmax and a Hyper SRT tank from gotvapes.com

The VMAX works great with every cart and atomizer I've put in it. The hyper SRT worked really well for about 5 minutes when I noticed dry harsh hits. I watched the video on gotvapes explaining how to correct the problem, but but right after I tried to fix it there was pop and the thing completely stopped working. I didn't think this was a bug deal, because I bought several replacement coils and wicks for the Hyper SRT from Gotvapes.com... The only problem is I can't find an explanation for how to install the replacement coils they are selling anywhere on there website or smokteks website. I've scoured YouTube and this thread for an explanation, but I haven't found anyone who has explained exactly what to do. A couple other people have asked in this thread, but I haven't yet seen an explanation. Could someone please help me? I don't understand why there isn't an explanation for how to make a product work. No one created a manual of some sort?

Sorry i can not find one either most poeple are changing into ss mesh plenty vids on that .But i changed one just put the wicks in the holes and screw the two legs to the two posts thats really all there is to it easy pezy it was the first one I ever tried to change so it took a sec but really the hardest part is to get the wick in the holes .After doing it i seen some one had an idea to tie a wire around the end and just pull it through ,If only i seen that before .hope that helps any but maybe some one knows of a vid for you .

 

[bombtrack311]

Hmmmm....complete set on its way to you : P

Sorry i can not find one either most poeple are changing into ss mesh plenty vids on that .But i changed one just put the wicks in the holes and screw the two legs to the two posts thats really all there is to it easy pezy it was the first one I ever tried to change so it took a sec but really the hardest part is to get the wick in the holes .After doing it i seen some one had an idea to tie a wire around the end and just pull it through ,If only i seen that before .hope that helps any but maybe some one knows of a vid for you .

I have no problem getting the wick through the two holes. I have tried to wrap each wire end around the two screws and nothing is happening.... I've tried it with 3 different replacement kits... What am I doing wrong?

 

[Ron R]

For the peeps wanting to use a regular silica wick with this unit I've found that if you enlarge the holes for the wick to 3/32 with a drill bit and then install your wick and coil and let it sit for a couple of hours so the wick can fully soak up the eliquid and expand to the maximum it is going to, it does not leak and it really seems to wick and no dry hits, I know this will take patience but in the long run you will be very happy. I tried to use this devise right out of the box and could not get it to wick at all. I know that alot of you may think that enlarging the wick holes to 3/32 seems like alot,but after you give the srt time to soak up and expand the wick it really works outstanding, Like I said I have had no leaking or dry hit issues after doing this quick mod to it, This is just my two cents, Thanx and vape on PEEPS