SvoёMesto KAYFUN 4

[MattB101]

Look what just came in a couple hours ago (referring to the SX Mini, I've had the K4 since the second week of December, hehe)...the K4 is an absolute pleasure to vape on this thing, very nice indeed.

I'm still messing around with power modes and watts in this thing, but it's been a treat vaping the K4 in this bad boy for the last half hour or so.

What is it? I know it's got SX350 Mini but what, who makes, etc.? I'm definitely interested. A link would be nice if you have one. Damn I am lazy!!

Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!

 

[jaxgator]

What is it? I know it's got SX350 Mini but what, who makes, etc.? I'm definitely interested. A link would be nice if you have one. Damn I am lazy!!

Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!

Boy! You are lazy. Here...

Yihi SX Mini 100W Mod

Features:

sx350 mini chip
60 watts regulated, also bypass mode for direct connection
Three modes: powerful, standard, soft
Charges via USB, takes one 18650 battery
Stainless steel buttons
Light-weight, high-quality aluminum body
Fits in the palm of your hand
Ergonomic design
Smallest available device pushing 60 watts
Future upgrades will be available
Most efficient chip design available to date
Tested to fire down to .17 ohms

 

[dems86]

What is it? I know it's got SX350 Mini but what, who makes, etc.? I'm definitely interested. A link would be nice if you have one. Damn I am lazy!!

Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!

It's the SX Mini Mod from YiHi, maker of the actual chip.

Ordered it from VariTube Monday afternoon and it arrived yesterday morning, Express shopping was definitely worth it in my case.

http://www.varitube.com/SXmini-Box-Mod-_p_171.html

There is the link.

 

[raitizz]

It's the SX Mini Mod from YiHi, maker of the actual chip.

Ordered it from VariTube Monday afternoon and it arrived yesterday morning, Express shopping was definitely worth it in my case.

SXmini Box Mod

There is the link.

If I was planning to get a ~50W mod right now, this would be the one I would consider.

R

 

[arken21]

so...is ni200 issue still a problem?

 

[BNEAT]

Wait, wut? It's called the "SX Mini 100W", but it's 60watts, and not 100watts?

Now I'm being the lazy one

 

[raitizz]

60W regulated, 100W bypass I think..

 

[Junny89]

Wait, wut? It's called the "SX Mini 100W", but it's 60watts, and not 100watts?

Now I'm being the lazy one

No, in standard mode it's 60w. However with the purchase of a extra tube, it fits 2x18650 batteries and then you reach the 100watts.
It's an extra extension tube that goes underneath.

 

[KurrptSenate]

what's the definitive wicking method for this device? with the regular KF, it was all about having a slated (45 degree) coil with the wick leg bent back and laying on the deck away from the channels.

this new kayfun seems to be about just shoving the wick into the atomizing chamber cup

 

[Bronze]

what's the definitive wicking method for this device? with the regular KF, it was all about having a slated (45 degree) coil with the wick leg bent back and laying on the deck away from the channels.

this new kayfun seems to be about just shoving the wick into the atomizing chamber cup

MY KF has a 90 degree coil and the wicks shoved down the sides so they touch the deck.

 

[KTMRider]

MY KF has a 90 degree coil and the wicks shoved down the sides so they touch the deck.

90° but when I had the ends touching the deck, I got dry hits. I have them just barely touching the juice deck and it works great now.

 

[Bronze]

90° but when I had the ends touching the deck, I got dry hits. I have them just barely touching the juice deck and it works great now.

I only get dry hits if I don't have enough cotton in the coil or my wicks don't reach the deck.

 

[KTMRider]

I only get dry hits if I don't have enough cotton in the coil or my wicks don't reach the deck.

Hmmm. I'm using rayon. Might be the difference?

Oh... and I'm using a clone <gasp!>

 

[Mtek]

what's the definitive wicking method for this device? with the regular KF, it was all about having a slated (45 degree) coil with the wick leg bent back and laying on the deck away from the channels.

this new kayfun seems to be about just shoving the wick into the atomizing chamber cup

For me, a bow tie style wick, once juiced on the deck and juice channels. The wick is not bent, just falls straight down and touching the deck. There is not a lot of wick info here considering all the posts as it hasn't been an issue. Most are still dialing in there coil size and height. Wick builds on it are very forgiving.

 

[Mtek]

Hmmm. I'm using rayon. Might be the difference?

Oh... and I'm using a clone <gasp!>

I had dry hits my second day, simply too much material. I had left for work and couldn't rewick. Throughout the day, I just unscrewed the fill cap a bit with jc open until I saw several bubbles released to the top of the tank. I was basically forcing juice in and using it as a dripper lol.

 

[Bronze]

Hmmm. I'm using rayon. Might be the difference?

Oh... and I'm using a clone <gasp!>

Very possible.

20 lashes for the clone.

 

[qorax]

I'm stuck with only one type of wicking method since the beginning. And since it performs just g.r.e.a.t. didn't try anything else.

Fray the tail end and shove it down method!

 

[KTMRider]

I had dry hits my second day, simply too much material. I had left for work and couldn't rewick. Throughout the day, I just unscrewed the fill cap a bit with jc open until I saw several bubbles released to the top of the tank. I was basically forcing juice in and using it as a dripper lol.

My first couple of builds were the same. Dry hits often and burnt wicks. I figured the wicks were blocking the juice holes so I trimmed more than usual and now it's perfect.

Very possible.

20 lashes for the clone.

Since I can't build ni200 on this reliably, my VS DNA30 has been getting a workout in the last few days

 

[Bronze]

I'm stuck with only one type of wicking method since the beginning. And since it performs just g.r.e.a.t. didn't try anything else.



Fray the tail end and shove it down method!

I do mine without the chimney but pretty much the exact same way. Never a lick of trouble.

 

[raitizz]

I'm stuck with only one type of wicking method since the beginning. And since it performs just g.r.e.a.t. didn't try anything else.

Fray the tail end and shove it down method!

Coil specs, kind Sir?

R