SvoёMesto KAYFUN 4

[AstroTurf]

Yeah, well I slept at a Holiday Inn Express last night!

And owns a dishwasher with a 6 amp heater!!!

 

[macpeace]

What causes a dry hit, when the JC is fully open?

 

[raitizz]

What causes a dry hit, when the JC is fully open?

From the top of my head:
- wick to tight or too loose in the coil
- wick too short, doesn't reach the holes
- wattage too high
- chain-vaping?

R

 

[Dusty_D]

What causes a dry hit, when the JC is fully open?

Not enough wick or it could be too much wick, or it could also be too much air not creating enough of a suction for the juice, or it could just be your juice is too thick. Sheesh.. pretty much any of those reasons actually.

Sorry..

 

[BNEAT]

Looks to me based on the pix that Svoemesto did not follow the example given by ProVape.

Lets count the threads together... One, Two, Three.

Yes, Three, Thats where Svoemesto stopped. ProVape has at least Two more.

Remember to divide the ProVape 510 in half from the bottom to the top.

Jim

So that's your solution, run an adaptor? or did I miss something?

 

[AstroTurf]

So that's your solution, run an adaptor? or did I miss something?

Svoemesto clearly did not copy the simple 510 adapter threads produced by ProVape.

The visible difference says that Svoemesto did not do that.

Pretty simple... I suppose ProVape said: Here is an example of the P3 threads and chamfer to duplicate.

Svoemesto did not do that. The Gripe and Failure falls squarely on them, Svoemesto.

Make Svoemesto make it right. (period)

That is all, Jim

 

[dems86]

Svoemesto clearly did not copy the simple 510 adapter threads produced by ProVape.

The visible difference says that Svoemesto did not do that.

Pretty simple... I suppose ProVape said: Here is an example of the P3 threads and chamfer to duplicate.

Svoemesto did not do that. The Gripe and Failure falls squarely on them, Svoemesto.

Make Svoemesto make it right. (period)

That is all, Jim

What if, for example, they were given when manufacturing initially started months back didn't hold true to the final, retail version P3?

 

[AstroTurf]

What if, for example, they were given when manufacturing initially started months back didn't hold true to the final, retail version P3?

Highly unlikely... ProVape is Perfect!

In all serious though, you can bet they were given the same thing that Aspire were given.

So what happened, and will you guys make them make it right?

If the error where on ProVapes end, They would make it right.

Jim

 

[raitizz]

Svoemesto clearly did not copy the simple 510 adapter threads produced by ProVape.

The visible difference says that Svoemesto did not do that.

Pretty simple... I suppose ProVape said: Here is an example of the P3 threads and chamfer to duplicate.

Svoemesto did not do that. The Gripe and Failure falls squarely on them, Svoemesto.

Make Svoemesto make it right. (period)

That is all, Jim

But Jim, not every P3 connector is a failure, so what's up with that?
Just a question, to consider..

Thanks,
R

 

[AstroTurf]

But Jim, not every P3 connector is a failure, so what's up with that?
Just a question, to consider..

Thanks,
R

In response I will say that every, and I mean every ProVape 510 adapter will fit any, and I mean any P3.

So where is the fault?

 

[raitizz]

In response I will say that every, and I mean every ProVape 510 adapter will fit any, and I mean any P3.

So where is the fault?

Should there be a fault? The threads on my P3 look the same as the ones in the pic by the user in which it did not fit. Still, I don't know, man..

R

 

[dems86]

In response I will say that every, and I mean every ProVape 510 adapter will fit any, and I mean any P3.

So where is the fault?

Yeah, but whose to say the adapter didn't change before final manufacturing process too? ProVape makes the 510 adapter, so the fact it fits isn't proof that SM is at fault for theirs not fitting.

 

[AstroTurf]

Should there be a fault? The threads on my P3 look the same as the ones in the pic by the user in which it did not fit. Still, I don't know, man..

R

If the glove does not fit... You must acquit.

 

[AstroTurf]

Yeah, but whose to say the adapter didn't change before final manufacturing process? ProVape makes the 510 adapter, so the fact it fits isn't proof that SM is at fault for theirs not fitting.

If they all didn't fit, Perhaps...

But some do!

 

[BNEAT]

Look dude, if you can't see the fail when you look at your P3 connection, then consider yourself lucky: ignorance is truly bliss.

BTW, the Aspire P3 connector is identical to the Svoemesto version, and they're equally ......ed in my eyes

 

[AstroTurf]

Look dude, if you can't see the fail when you look at your P3 connection, then consider yourself lucky: ignorance is truly bliss.

BTW, the Aspire P3 connector is identical to the Svoemesto version, and they're equally ......ed in my eyes

I also see the fail in the Svoemesto attempt at a smooth P3 transition adapter.

It didn't happen.

I'll wait for the 23mm 510 base for the V4, and some other fixes before I plop down my 2 bills.

 

[iamoldskool]

Just rebuilt my KF4 at 0.85 ohm. 10 wrap 25g spaced coil around 3/32 drill bit + homemade vanilla custard = best vape I've ever had. The draw is so smooth, got damn.

 

[Mtek]

I also see the fail in the Svoemesto attempt at a smooth P3 transition adapter.

It didn't happen.

I'll wait for the 23mm 510 base for the V4, and some other fixes before I plop down my 2 bills.

23mm 510 accessory base is available now Astro

 

[AstroTurf]

23mm 510 accessory base is available now Astro

Thanks for the heads up.

It looks beautifully made.

True Svoemesto quality!

 

[AstroTurf]

I never even considered it might be a threading problem, just assumed the whole SM P3 section below the base (including the threads) was too long. But after seeing your post, and that the P3 top cap threading doesn't go all the down, it very well could be. I remembered the large beveled section on the ProVape 510 adapter so grabbed a comparison shot of the two.

I'd have to disagree that the Provari is out of tolerance based on my picture above of the large beveled section at the bottom of the ProVape 510 adapter. ProVape made it this way, for whatever reason. SvoeMesto needs to conform to their specs.

Just visited Svoemesto website...

The above quoted pictured P3 adapter doesn't look like the one on their website:
Does it?