Always considered myself an "Epsilon"....
Where does that leave me?
At home, I'm the Omega
SXmini M Class (TEMP CONTROL)
- Thread starter whitewidows
- Start date
- th_trl_thread_readers 0
- Status
At home, I'm the Omega
I would guess the Veritas with it's long legs would be a no go. I haven't tried it yet, but that's my guess.
I purchased a genuine yihi sx mini silicone case from sweet-vapes. It seems to be a low price at $4.45. Only black color. If anybody intetested
http://sweet-vapes.com/apvs/yihi-smok/yihi-sx-skin.html
http://sweet-vapes.com/apvs/yihi-smok/yihi-sx-skin.html
It must be the going price since I purchased mine for $4.50 at MVS
Silicone Case Sleeve Yihi SX Mini M
2 Color options - Black and Blue
Silicone Case Sleeve Yihi SX Mini M
2 Color options - Black and Blue
I got 3 from MVS because I have done a lot of business with them and really like them. Always treated me right.
You know, I have bought a number of items from Sweet-Vapes and their prices have ALWAYS been excellent and their shipping fast. I am not surprised that their price is lower for the SX Mini M Class silicone case. I bought mine elsewhere for $7.95. I just may pick up a spare case from Sweet-Vapes.
Mine finally arrived today here in NorCal. It took 4 days to go from Melbourne to Tampa...on a map it's not too far....must have been bar hopping along the way!My sleeve stopped in Tampa for some drinks before leaving Florida.
Love mine as it fits perfect and protects well.
WAKE UP!!!!
Ya'll wrapped up in trying to figure out how to properly install your Sleeves or what?
Anyways,
It's Heeeee-eRRRRR.
The Erl Konigin is simply AMAZING. Equipped it with a Ti 26ga, 6 Wrap on @2.6mm I.D. (yielded a very steady 0.22 ohm) and Wicked per EK Master Qorax's Specs and it is sheer Bliss on the SXMM in TC. Just a perfect blend of robust Flavor and optimally warm & moist Vapor.
I just got it built and rocking last night so put it in Ni200 Profile at 20J & 295* F so I could give the EK the work-out and Test-Run and not worry about tweaking the SX on Ti Test Profile. Will switch to and toy around with that tomorrow night and report back. I hope she is steadier than the L2 or the rda was. We shall see. Will start off at around 22.5J and 420* F and go See-Saw up from that.
Ya'll wrapped up in trying to figure out how to properly install your Sleeves or what?
Anyways,
It's Heeeee-eRRRRR.
The Erl Konigin is simply AMAZING. Equipped it with a Ti 26ga, 6 Wrap on @2.6mm I.D. (yielded a very steady 0.22 ohm) and Wicked per EK Master Qorax's Specs and it is sheer Bliss on the SXMM in TC. Just a perfect blend of robust Flavor and optimally warm & moist Vapor.
I just got it built and rocking last night so put it in Ni200 Profile at 20J & 295* F so I could give the EK the work-out and Test-Run and not worry about tweaking the SX on Ti Test Profile. Will switch to and toy around with that tomorrow night and report back. I hope she is steadier than the L2 or the rda was. We shall see. Will start off at around 22.5J and 420* F and go See-Saw up from that.
WAKE UP!!!!
Ya'll wrapped up in trying to figure out how to properly install your Sleeves or what?
Anyways,
It's Heeeee-eRRRRR.
View attachment 473849
The Erl Konigin is simply AMAZING. Equipped it with a Ti 26ga, 6 Wrap on @2.6mm I.D. (yielded a very steady 0.22 ohm) and Wicked per EK Master Qorax's Specs and it is sheer Bliss on the SXMM in TC. Just a perfect blend of robust Flavor and optimally warm & moist Vapor.
I just got it built and rocking last night so put it in Ni200 Profile at 20J & 295* F so I could give the EK the work-out and Test-Run and not worry about tweaking the SX on Ti Test Profile. Will switch to and toy around with that tomorrow night and report back. I hope she is steadier than the L2 or the RDA was. We shall see. Will start off at around 22.5J and 420* F and go See-Saw up from that.
That's a very nice looking set up mate
Me likey the wrap
Thanks 
The Drip Tip was a tad too "non-Conformist"... Hired its Replacement today. Media Blast Base with frosted Glass (actually Acrylic me thinks).
The Drip Tip was a tad too "non-Conformist"... Hired its Replacement today. Media Blast Base with frosted Glass (actually Acrylic me thinks).
WAKE UP!!!!
Ya'll wrapped up in trying to figure out how to properly install your Sleeves or what?
Anyways,
It's Heeeee-eRRRRR.
The Erl Konigin is simply AMAZING. Equipped it with a Ti 26ga, 6 Wrap on @2.6mm I.D. (yielded a very steady 0.22 ohm) and Wicked per EK Master Qorax's Specs and it is sheer Bliss on the SXMM in TC. Just a perfect blend of robust Flavor and optimally warm & moist Vapor.
I just got it built and rocking last night so put it in Ni200 Profile at 20J & 295* F so I could give the EK the work-out and Test-Run and not worry about tweaking the SX on Ti Test Profile. Will switch to and toy around with that tomorrow night and report back. I hope she is steadier than the L2 or the RDA was. We shall see. Will start off at around 22.5J and 420* F and go See-Saw up from that.
If you like the Erlk, you should pick up a Gem by Mark Bugs at some point. Then you'll have my favorite two flavor attys.
can somebody explain something to me. I have one laptop that when I download the upgrade file and unpack it it comes out an adobe file and loads right onto my Sx. the other one unpacks it and it comes out as an SXI file and will not load onto my sx. I am using 7zip on both. I can't figure it out.
- Status
