just wondering how the cartomizer works with FOG....anyhow just found Lightgeoduck's vid that answers the question....check out about 9 min in
liquinator sure walks and quacks like the AFS with cart
Tank-O-Matic Liquinator v4.1
- Thread starter Wylie
- Start date
- th_trl_thread_readers 0
- Status
just wondering how the cartomizer works with FOG....anyhow just found Lightgeoduck's vid that answers the question....check out about 9 min in
liquinator sure walks and quacks like the AFS with cart
After the glowing reviews, I decided to take the plunge and ordered two of the 510 3 ml tanks with both SR and LR resistance cartos. I have never been a fan of cartos since they always leave that burnt taste. I managed to salvage a whole bunch by using them on my Reo Mini.
I was a bit skeptical after seriously bombing out with the Fluxomizers with cracks and leaks all over the place (Got beat up for daring to criticize the selling company by called them a botched science experiment. It is amazing to see how some users will stand up for a vendor even when the product is garbage. The cult mentality exhibited by some makes me better understand how the Reverend Jones got some 900 people to take poisoned Kool Aid),
Everything arrived in a plain envelope with no instructions and no packaging, so for that I would rate them a 2.
I refreshed my memory on loading and using with the clear instructional videos, put it on my ProVari, and have been vaping away. Rating on the video: 9.5
Ease of use: 9.5
Taste: 9.9 (never thought a carto could taste that good). Despite the tons of vapor, there is no burnt taste whatsoever.
Seal, fit 9.9(only been since Saturday), but my fruity juices which destroyed my clearos on contact, work great.
My only negative would be that these are juice hogs. Not even my ReoMini uses juice that quickly, but I am not vaping at a higher voltage. Then again, I DIY my own juices so juice cost is not really an issue. I just got in a whole bunch of different flavors from PA and ecigexpress that I am looking forward to blending.
The Liquinator is a perfect match for a VV unit like the ProVari.
Other than looks, I have no idea why anyone would want to mess around with all of these junk clearomizers, fluxomizers, turbomizers, and wretchedmizers that don't really work.
This thing is an absolute keeper.
One more rating: -10 because I am going to have to buy more tanks and load them with different juices. It's a good thing I have a Dremmel!
I was a bit skeptical after seriously bombing out with the Fluxomizers with cracks and leaks all over the place (Got beat up for daring to criticize the selling company by called them a botched science experiment. It is amazing to see how some users will stand up for a vendor even when the product is garbage. The cult mentality exhibited by some makes me better understand how the Reverend Jones got some 900 people to take poisoned Kool Aid),
Everything arrived in a plain envelope with no instructions and no packaging, so for that I would rate them a 2.
I refreshed my memory on loading and using with the clear instructional videos, put it on my ProVari, and have been vaping away. Rating on the video: 9.5
Ease of use: 9.5
Taste: 9.9 (never thought a carto could taste that good). Despite the tons of vapor, there is no burnt taste whatsoever.
Seal, fit 9.9(only been since Saturday), but my fruity juices which destroyed my clearos on contact, work great.
My only negative would be that these are juice hogs. Not even my ReoMini uses juice that quickly, but I am not vaping at a higher voltage. Then again, I DIY my own juices so juice cost is not really an issue. I just got in a whole bunch of different flavors from PA and ecigexpress that I am looking forward to blending.
The Liquinator is a perfect match for a VV unit like the ProVari.
Other than looks, I have no idea why anyone would want to mess around with all of these junk clearomizers, fluxomizers, turbomizers, and wretchedmizers that don't really work.
This thing is an absolute keeper.
One more rating: -10 because I am going to have to buy more tanks and load them with different juices. It's a good thing I have a Dremmel!
just got a order of 2.0 boges to try out in my liquidnator, EASY just to use a hacksaw blade to cut these even for $1 vs a $20+ dremel tool. GOD IM IN LOVE with my liquidnator
Here's the SS Cap Liquinator spy photo:
There is another version coming, but let's save that for another day.
my question does it have to be a cartomizer or can you use an atomizer with this device?
I can't imagine how you'd use an atomizer on it. I'm sure someone will figure it out, though.
thanks for the pic....if they could come up with the same tank dimensions as the fog, a mouthpiece extender with maybe some low sheen metallic films us poor folks might break out with pudding facesHere's the SS Cap Liquinator spy photo:
There is another version coming, but let's save that for another day.
Last edited:
I went to purchase one but my computer is telling me it isn't a secure web page?? what's your thoughts on this
Ive had mine for just over a week (8 days now) running on the same carto it came installed with and it has been great. Tho the carto every once in awhile (maybe once or twice a day) spits a tiny amount (hardly even noticeable). I agree on it being a juice hog, I fill twice a day and have about 1 ml juice left over at the end of the day (so Im using about 5 ml of juice a day). I attributed this to me running my cartos too dry however (prior to having the tank) and this device is just like the 3 bears, its keeping the carto 'just right'.
But considering I pay $35 for 180 ml of juice, which already includes the shipping (I was DIYing my juice but I found a place that can make it cheaper than I can), throw in another $15 for cartos (worst case scenario), $50 a month is plenty manageable for me.
man I may have to get one of these. Really seems to be working well for people. Saw this a month ago and it's always in the back of my mind.
throbinskin I am really looking forward to the ce3 too! mid july release. I don't think they will work with a map tank without some modding. They are completely different then the ce2's. From what I've seen I'm not sure how easy they can be disassembled. Here's hoping.
throbinskin I am really looking forward to the ce3 too! mid july release. I don't think they will work with a map tank without some modding. They are completely different then the ce2's. From what I've seen I'm not sure how easy they can be disassembled. Here's hoping.
I'm wondering, if I picked up a 3mL dual coil tank, would the tube for the 5mL dual coil tank fit? And will dual coils fit in the phat tank?
The word is getting out fast on these!
Regarding the tanks going through a lot of juice, it seemed like the MAP tank did that too. It seems to me that like you all say, it may be due to the constant saturation that you get with a tank as opposed to using a smaller set amount with just the cartomizer.
One more question... For those of you using the Liquinator, have you noticed more, less, or the same rate of juice discoloration/burning?
The word is getting out fast on these!
Regarding the tanks going through a lot of juice, it seemed like the MAP tank did that too. It seems to me that like you all say, it may be due to the constant saturation that you get with a tank as opposed to using a smaller set amount with just the cartomizer.
One more question... For those of you using the Liquinator, have you noticed more, less, or the same rate of juice discoloration/burning?
If I wanted to use a dual coil, I'd use the 5ml long tank. It will work in the regular 3ml or the Phat (with the warnings earlier in post 26).
Same, which is to say not much, if any.
Can I get an AMEN?!?!?! I hate anything that MiT makes.
Here's the SS Cap Liquinator spy photo:
View attachment 43774
There is another version coming, but let's save that for another day.
I love it...but hate being kept in suspense
I'll take an 801 Fusion over the CE line anyday. MiT is a joke and so are their products...can't cha tell I hate them?
I don't notice any more juice consumption unless using an LR. My juice has a slight tint that doesn't change in color. However, I vape my tanks dry pretty quickly.
In reading some of the postings, I see that some of you are using acetone to get rid of the glue on carts.
You probably would be better off using something like Goo be Gone and in small quantities. Just dampen a paper towel and rub it on the outside. The covering should come off easily.
One more note, if you have acetone, you should keep it away from anything having to do with vaping. It will stress crack almost all of the plastics out there as well as the insulation on a the wiring of just about anything. Neoprene does not like it either.
That includes the Lexan (polycarbonate) tubes. While polycarbonate has much better chemical resistance than the styrene used on the clearos, it is not the best plastic for chemical resistance.
It is my only concern about the Liquinator. Remains to be seen how they stand up over the long term.
If stress cracking starts popping up as an issue, they might have to shift to butyrate.
You probably would be better off using something like Goo be Gone and in small quantities. Just dampen a paper towel and rub it on the outside. The covering should come off easily.
One more note, if you have acetone, you should keep it away from anything having to do with vaping. It will stress crack almost all of the plastics out there as well as the insulation on a the wiring of just about anything. Neoprene does not like it either.
That includes the Lexan (polycarbonate) tubes. While polycarbonate has much better chemical resistance than the styrene used on the clearos, it is not the best plastic for chemical resistance.
It is my only concern about the Liquinator. Remains to be seen how they stand up over the long term.
If stress cracking starts popping up as an issue, they might have to shift to butyrate.
mayonnaise works good, put it on for a a hour or two and [it will stay on the metal and not run off] and stoke the glue with oil so it can be removed with a finger, DON'T USE ACETONE, nasty solvent
What is this $35 per 180ml you speak of? Maybe I havent been looking long enough but I would certainly be interested.
And when are they going to release the 5ml versions? Their website has been saying "This Week" for a full week now...
I am undecided about this . I am really digging the DC cartomizer and just don't know if I can afford another like
- Status
Similar threads
